70Kbps you mean is what??
we better us b = bit
B = byte
if your one is only 70kbps only, then it is not fast
but if it is 70kBps, then it is over the limit for 512k line......

maybe speed reading problem in BitComet only...

@jolipoli81
you subscribe to 512mb line??

70Kbps you mean is what??
we better us b = bit
B = byte
if your one is only 70kbps only, then it is not fast
but if it is 70kBps, then it is over the limit for 512k line......

maybe speed reading problem in BitComet only...

@jolipoli81
you subscribe to 512mb line??

hey guys....can someone help me out with something..

check the red and blue box at the bottom right of the picture...

can someone tell me what is that??? why is it like that?? etc etc...first time seeing it.

how do i resolve it?? is it the cause that my DL speeds SO SLOOOOOOOOOWW???

thanks in advance

70Kbps you mean is what??
we better us b = bit
B = byte
if your one is only 70kbps only, then it is not fast
but if it is 70kBps, then it is over the limit for 512k line......

maybe speed reading problem in BitComet only...

@jolipoli81
you subscribe to 512mb line??

i have no idea what u just said man....

me a total n00b when it comes to all this networking stuff....kakak

i'm using 1MBps package....
and my line is damn the slow

can somebody tell me whats the TCP/IP limit u guys set in preference? thanks

hmm... it is very hard to explain to you step by step...
you can try refer to How to Configure BitComet for the Best Possible Speed link in first post
if still have problem, then come back and ask again

if you understand everything in there and has done what they tell
but still have yellow light, then it is the later version of BitComet bugs...
for that problem, we also don't know how to fix it...
you can only try to restart your BitComet and hope it will show green light...

about the "don't download too much task in same time" mean don't download many things in same times
because it will choke your bandwidth

Server Error in '/' Application.
--------------------------------------------------------------------------------

Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.

Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".


[bad html removed] Web.Config Configuration File -->

<configuration>
    <system.web>
        <customErrors mode="Off"/>
    </system.web>
</configuration>


Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.


[bad html removed] Web.Config Configuration File -->

<configuration>
    <system.web>
        <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
    </system.web>
</configuration>