Both not power sharing rite?

yes

Thank you.

fotile emg9028 and electrolux ECT9750S recirculation hood.
Which one is better? What is unrestrained flow compared with normal airflow?

electrolux still using mesh filter as the primary filtration, so performance will drop as mesh filters easily get clogged, no photo of their carbon filter but i guess they are using the standard thin type, as compared to FOTILE latest carbon filter is very big, bigger capacity and filtration

Jus a reminder for recycle hood, DO NOT cover the hood with cabinet

This post has been edited by zheilwane: Jun 16 2023, 09:22 AM

Hai, looking for low end built in hob and hood

Already survey and now contemplating to choose either the following:

a) Hob - prefer stainlesss stell 2 burner
- Rubine RGH - ENYA2B - SS -
- Rinnai RB - 712N - S2

Which one the better selection in term of safety and value for money

b) Hood - prefer slim and recirculation
- Midea MCH - 76MSS
- Rubine Genoa 75BL

In term of effectiveness and reliability, which one is good?

Hi, anyone here have used ROBAM-76H1S cooker hood

https://shopee.com.my/product/140237634/19371035240

I liked the design, the price also quite good with the specification it provide, got 4D Fresh Non-Disassembly and Wash Free using 4 layers of filtration which is Baffle, Filter, Rectifier Net and Impeller

I am thinking on getting this for my kitchen since my kitchen cabinet area is only 8 feet and wanted to maximise most of the space whenever possible

Thinking on using the cooker hood together with this cooker hob https://shopee.com.my/product/52664407/8333925339

The cooker hood is 795mm in width and the cooker hob is 750mm in width thus I think it should be okay right

More details : https://urbanez.com.my/robam-76h1s-black-ultra-slim-hood





This post has been edited by farhanz95play: Jun 21 2023, 11:39 PM

Hi
Almost 3 months i study n searchinf rhe brand.
Now i am lost n confuse which item i will get.
I am just looking the item:

Build in oven- 72 l have function steam / self clean
Build in microwave - anything as 28-32l
Hood - slim, ducting, easy to clean sucriin mkre 1400 n less noise below 55 db
Hob - induction with knob

My budget is 6k, if anyone have an expertise for this i need ur advice

1) for built in microwave the capacity for each brand is +- same just the method in measuring the capacity is different bcoz from what i know they are using the same rotating plate and the size is 310mm diameter, so no matter what capacity they advertise in catalog, if the plate is 310mm = that is the max size u can fit in.

2) slim hood u wan ducted or recycle, usually seller assume u wan recycle. slim hood is slim bcoz small motor, so suction power wont be high, if u c high suction slim hood and selling very cheap = the spec is misleading or twin motor they give u two 700m3/h motor.

within budget +- Fujioh

Hood - FR-MS1990 (suction power wont be high but at least great oil filtration)

Hob FH-IC7020 (hybrid hob, induction on side, ceramic on side)

Oven FV-EL62

Microwave - FV-MW51

NON-Disassembly, so cant dissemble the filter for cleaning? i tried google for video but cant find any video for cleaning on this model. Just checked some info online, haven seen actual product. If the oil filtration of the filter is so good, then more oil will get stuck at the filter and this will definitely reduce suction power, if unable to dismantle for cleaning, this will b a big problem.

The hood is painted, will the paint last bcoz it is so near to the gas top? Majority brands using Glass, so ez to clean and some brands like FUJIOH using their japan tech paint, so confirm no problem. Just need to check what type of paint they are using and any warranty for it.

Size wise is ok as long as the hob is smaller than the hood, confirm performance will be good.

I was told both fotile AMG9007i and JQG9009T can be installed as recirculation hood, so for this do i need to get someone to service them periodically? or it can be done by myself?

I checked with the sales agent, the only part that can disassemble is this oil cap below the cooker hood,



The sales agent (SA) say "Any brand that use charcoal filter cannot clean, have to change to new one". This product can use charcoal filter with purchase of additional RM250 but I think the pre built only use the Ducting Hose, not sure on this tho

Regarding the paint as per inform by SA
- The product does not come with any issues related to heat affecting the paint.
- If there are any problems related to heat affecting the paint, the product is not proven to be sold in the market by SIRIM.

Asked a buyer on shopee that went to the shop she says the cooker is strong and really quite, no other info able to get from her

This week at sunway pyramid friday to sunday ( 7 - 9 july 2023 ) there will be an Expo and Robam will be there, will go there to check and ask further question regarding the dismantling and paint

Thank you bro for the insights

Owh, the hood can actually be dissambled but they do not allow the user to carry out the disassembly instead they say must be carried out by professional

I read the user manual here for the hood : https://my.robamworld.com/uploads/3b5c0841.pdf






Removal Of Filter

●Long press the low/mid button + lighting button to make the air guide open, then unplug the power supply.
●Remove the screws on the left and right sides of the screen by rotating 90° counterclockwise with a screwdriver
against the screw holes.
●Put your fingers into the filter hand holes on both sides, hold the filter and lift it upwards, so that the lower end of the
filter can be removed from the slot.

Didn't see that the removal of this hood filter that hard, It's possible that the non-disassembly feature is simply a marketing tactic to encourage customers to purchase their product.

i may b wrong la, but i think SIRIM is mainly for electrical components rather than paint. For example if u r buying white, any warranty if the paint turn yellowish or bubble up something like that.

hai guys can suggest.. 1.6k hob n hood area klang shah alam

tq

Went to the Home Expo @ Sunway Pyramid yesterday, able to see the Robam 76H1S Slim Cooker Hood in action, the SA says the paint used piano paint ( I think paint that is focused on making the color looks glossy and sleek appearance, they say if the color is white it will never change to yellow ), the cooker had has 6th level, the noise for the 1st level is not noticeable, the noise for 3rd level is noticeable but not loud, the 6th level is quite loud, only going to use till 3rd level for moderate cooking so I am okay, the filter is cleanable easily using wipe cloth, its also able to be dissambled,

During walking around I able to found other cooker with the same pattern of slim that is HAFELE ( german brand ) T SLIM HOOD DC MOTOR ( refer attached image ) this one is super quite cause using DC Silent Motor and it got 9 level of suction, it is bigger than the robam one, and this one cannot be dissasembled, its using glass thus easier to clean outside

For those who are looking for COMBI OVEN especially FOTILE, hold your horses as a new model will b coming soon next month, got a glimpse of it when I was invited to China for TOP Performance Award.

New model hyzk32-e3 also known as ONE OVEN PLUS comes with bigger capacity, with additional bottom heating element, more functions and better design. However, price is also higher due to the upgraded features and size.

This post has been edited by zheilwane: Jul 10 2023, 04:14 PM

Looks more sleek design...

1. Price indicative below 3k?
2. Can it be built in into cabinets?

waiting new stock arrive to test, old model now comes with optional add on ventilation extension, so if ur cabinet space is big enough can slot in



This post has been edited by zheilwane: Jul 11 2023, 02:31 PM

Dear all,

For Fotile AMG9007i (refer to photo), recommended installation height is 285mm - 325mm from the surface of the hob. I'm using induction hob so the 50mm pan support height is not required. Installer suggests 300mm but I remember someone here said to go for max allowable. I prefer max allowable to avoid any boiling liquid/oil splashing (imagine the frying process when cooking sambal, for example).
Higher height is also good if I should switch to gas hob in future.

Q1) should I go for 300mm as suggested by installer, or 325mm (my preference)?

Q2) any harm if I go even higher, say 350mm? I understand the higher the hood, the less it smoke it can capture.

Thank you.