Im looking for side cooking hood, budget below 3k any recommendations?
Tested Senz model-SZ-CH338i at the home fair RM2.2k 5 years warranty, the noise are acceptable for me, just wanted to know any other better option?

Im looking for side cooking hood, budget below 3k any recommendations?
Tested Senz model-SZ-CH338i at the home fair RM2.2k 5 years warranty, the noise are acceptable for me, just wanted to know any other better option?

hi, between rinnai rb-72g and FOTILE GHG78211
which one is better, thanks

hi, between rinnai rb-72g and FOTILE GHG78211
which one is better, thanks

I would go with fotile

fotile got
1) anti explosion glass
2) instant ignition (no need to wait)
3) super flame tech with efficiency over 60%, regular brands +- 50 - 55%
4) perfect burner diameter 4.3" not too big, many brands 5.5", too big burning pan n pot handle and high heat loss

thanks for the recommendation, can suggest me hood with budget around 1k? thanks 

I need to replace my 10 yr old Electrloux gas hob because the flame is getting weaker.  Wife request the one with stronger flame.. like 5.5KW.  Shortlisting between this 2

1) Livinox LGH-288-2B-BL -
+ve = cheaper, looked like efficient burner design
-ve = Normal glass

2) Rinnai RB-92G
+ve = Schott glass
- = pricey

Well price is not an issue but value for money is.  I kinda like the livinox efficient burner design but I also like Rinnai Schott glass.  Any thoughts on this?

TQ

hi, between rinnai rb-72g and FOTILE GHG78211
which one is better, thanks

Dear sifus, my house is under strata act, so cannot do much. I have EMS9020, want to build a window at the yard (allowed by developer) and extend my ducting to the outside of the window. Refer plan below:
[attachmentid=10803663]
My plan is to make a hole on the fixed window (1ft fixed, 3ft can open), and stick the ducting to it. So every smoke or smell will be pushed outside. The thing is, my contractor said can, but after the silicon between the ducting and window glass gets hard (the weather etc), in the future each time i switch on the hood, there will be loud noise (friction between ducting and window glass). I cant build a concrete for the ducting since my house is under strata. Any suggestion?

My current setup is very similar to yours just that my ducting is quite long around 12feet. The kitchen part ducting covered in plaster board and at the yard my ducting is exposed. Due to miscommunication the hole on my window is slightly larger than the duct end cap. So the end cap can't fit. My case the duct is just sitting on the window glass without any silicone. Not much noise I would say just sometimes can hear it when birds standing on the tip of the duct

Dear sifu,

Can intro me hood (2 types - recycle and non-recycle) and hob? Below are the requirements.

1. Heavy cooking
2. 3 burners would be best, but 2 is acceptable
3. Budget about 3k +- 10%
4. Dont make kitchen oily/odor (so need best hood, affordable hob)
5. Using gas stove
6. The hob must not flat (can put more type of cookware - wok)
7. Open kitchen concept
8. Can tahan 4 to 5 yrs. Possibility can tahan 10yrs and above?
9. Easy cleaning

livinox mica hood as this hood can be ducted or add only charcoal filter to convert to recycle
hob livinox lgh 388 3b, 3 burners and these 2 combo can get less than rm 3k, within budget

so i guess this is the best combo for your requirement