if u dont cook much buy a new livinox, if hole fit (need to check) a brand new livinox is only rm 1k+- depending model, half the price of trade in vigico

This post has been edited by zheilwane: Jul 14 2020, 04:48 PM

My fotile hood is using 7'' duct.
The renovation indon worker requested a white pvc pipe to be inserted in the drilled wall hole.
However, where to find the 7" pipe?
6" or 8" is easy to find..

7" can be found but not as common as 6". I managed to buy 1 7"-7" connector (grey) when i initially planned to expand my existing 6" to 7" duct hole for my Fotile hood. I think the hardware shop (at Permatang Pauh, Penang) charged me about RM20-RM30 for it.

Just bought this combo. ems9020 + ghg78211
wanna ask. whats the longest acceptable distance the hood hose for the hood to perform normally?

actually many ways to make 7", just contractors don wan think.

1) modify 8" pipe as per photo shared by leeyung (another forumer - my fotile customer)


2) get a 5L paint can, measure to double confirm diameter is 7", wrap with newspaper. Cement into the wall, once cement dry, pull out

3) manual hack 7"


4) aluminium sheet roll it to be 7"

This post has been edited by zheilwane: Jul 17 2020, 11:21 AM

hose provided is 15 ft, so upto 15ft confirm safe

Good day to all,
Is Hood & Gas stove under 2k possible? If not please recommend Gas stove only under 1.5k as kitchen already have exhaust fan.

Also the counter top is concrete with tiles what size of cut out should I prepare?

Thank you so much

plenty option below rm 2k, livinox, rubine sure can fit

Ok can you recommend two burner gas stove under 1k. Thank you

Hi. I have a gas cooker with 2 hobs with 2 burner rings each. The right side hob is working fine, but the left side is problem. When only the internal ring is used, I can see that the flame is smaller compared to the one on the right hob. When I have both rings working on the left hob, especially on medium, the flame always goes off suddenly with a popping explosive sound. I think the gas supply lines or rings are blocked.

Are there technicians whom I can call check/fix this? The brand is Zanussi, but already out of warranty period. I bought it long time ago, but only now moved in to use.

What you trying to say/show bro?

Just to show you how is mine functioning.

Repair minimum also RM50 labour for checking, parts ?

Buy new...

This post has been edited by mini orchard: Jul 25 2020, 10:50 AM

is this changes in suction power big different?

This post has been edited by blackdd: Jul 28 2020, 10:56 AM

jqg9009s discontinued d, very good model but now JQG9009t with DC motor even better

This post has been edited by zheilwane: Jul 28 2020, 06:06 PM

Anyone using the senz brand hood and burner?Any reviews on it?The design and suction power seem to be good. Plan to get this for new house.

I recently purchased a Fotile JQG 9009T to do an unboxing and installation video for my DIY YouTube channel.

This was the first time I am buying a China branded and made appliance as all my previous purchases have been either Bosch or Teka.

I was recommended by Fotile to check out a shop in Kepong named Builders Hardware Enterprise as I was told they have a unit that is connected to a duct and could be switched on for testing purposes.

I have access to 30 different homes with various types of kitchen hoods from cheap ones to expensive ones, this one is definitely an impressive one as the suction power does make a big difference but the biggest difference over the other powerful models by the same manufacturer is the quietness of it. The condo that would get this first unit now uses a Teka 60cm telescopic one that is rated at 440m3/h, this Fotile one makes less noise and does a significantly better job.

tq bro for your purchase, do share the video here, i bliv many forumers also wanna learn to DIY

Hi, I have a fotile ems9020 wanna let go,
Totally new and unopened box.
Let go at RM1.6k, please pm me if interest, my location at KL.
Packaging size is L1005 x W695 x H625 mm for reference to arrange self pick up.

Wanna ask, what is the standard size gap between hood and hob?