Add bigger fuse from 16 to 25 in red color should be able to work out heavy load

Inverter works out.
Can be runs as quicky to reaching your deg. set point and then reduce to part load and maintenance the energy like very minimum power only.

Less said here.
Non-inverter 2hp used input watt = 1.8kw - 2.2kw from when start to boot up at 2.2kw and half and hour to be reduce to 1.8kw normal BTU from 18000 to keep cooling down all the place, once the set point is reached then will be listen outdoor & indoor fan cut off and totally power switch off for keep and wait the temperature dropping 2 more degree and start against to quicky booting up once is hit and stop again.

Inverter works can said is from your start power and one of bro said the outdoor unit hear like JET sound.
Due to really impressive to be full load in max runs to cut short time for cooling down within 20mins of whole place.
Once is hit and reduce to part load = very mini needs like 0.5kw as 2hp inverter to maintenance the same cooling, unless you open door or window or visitor and inverter PCB may tell outdoor unit to increase few more BTU to target as same set points, then when you stay at outdoor can feel the compressor works as veriable speed all the times long.

No matter how from inverter you do not know so much, after pay money then enjoy to comfort air with energy saving is the main point.

(In before my wife at kitchen window all time is open one and use exhaust fan to blow out cooking oil smoke, she never close the kitchen door also, regarding my living hall aircond still switch on and also does not effect like used more energy than non inverter 2hp.. From my bill now to be compare only, inb4 used 2hp and paid for 2x 1hp bill. After instead to 2.5hp inverter = pay at lower energy than 1hp non inverter bill)

This post has been edited by kimsim: Feb 15 2014, 11:07 AM

Today just visit to aircond shop on the ME actual outlook would be this and change to Mr. Slim already.



Regarding mine an installed 3 yrs back for this model : StarMex

1.5hp instead to 1hp.
The rest follow your location

The option is remain your idea, then can choose1.5hp or 2hp to switch on diff. Place

This post has been edited by kimsim: Feb 16 2014, 04:23 PM

York Cooling King for 18000 btu at 1630w input watt is consider quite lower already.

Put 1.5hp inverter should be good than enough, if you decide over 2hp is really oversize.

Too cold = not really is the good idea for your healthy and sleeping as confort.

Compare brands from cooling faster then go for ME inverter as your choice.

I'm not salesman, but I'm really tried many brands before, so I was prefer or suggestion only.

Hitachi DC inverter a bit slower cold down and slightly noise airflow but so far no issue.

ME = Mitsubishi Electric
DC inverter really impressive of confort air & cooling fast & quiet at all, from 21db only.

Unless they going to change gas from R22 instead of R410a to be solving cooling faster than traditional R22 now.

For me I don't mind to pay higher as one stop painful.

If I was pay lesser to install but in future effect my operates & duration hours for more into calculating day by days.. So my life's lagi painful

Lol..

Don't try to telling ppls you are using per day maximum at 2-4 hours max.

That your statement )

You would like to commended ppls reply, that's your business.

I got my suggestion without any commission here, from what my opinion of usage everyday I knew what I was replied here.

So far I affected only you guy can't accepted the real life..

Since got good recommended for new tech and why not to try with latest tech..

1st do you like using aircond? Or portion only.

If very hardly switch on, can be do refurbished with DIY new paint on front cover.

For the gas piping can be reused.
Unless is totally change new.

What numbers??

Prove me for what?
Then why not you prove yourself?

Actually I'm really hope you wake up over.

Since we all here already tried from non inverter and cannot tahan every months of bill then jamp over to inverter.

Since inverter go great why you still thinking on non inverter made like god?

For example like proton Saga BLM auto really suck fuel.
After replace with CVT to reduce higher FC.

Then why not you recommend ppls buy new FLX?
Then still thinking the 4AT made like god of BLM.

For me I can't tahan to pump higher maintenance. Rather than sold off my BLM and buy new FLX...

Everything is real life, are you agree?

This post has been edited by kimsim: Feb 17 2014, 12:44 PM

For normal spray paint would be work.
I'm DIY before of my York aircond.
Then used back existing pipe to be save cost.

But make sure you sand paper over b4 spray.

New piping is good for new aircond,
Either R22 or R410a, but after installed back R22 may not good in future to change again for R410a.

Both gas are totally different oil inside.

Everything is just depend your own to decide.

This post has been edited by kimsim: Feb 17 2014, 01:24 PM

8800 to 11000 btu is maximum.
Don't forget inverter is runs with variable speed everyday can be self adjusted of increase or decrease BTU from minimum to full load.

Inb4 I'm also worried on my ME inverter come with 8530 btu, but after installed it is really impressive of the cold air is blow out with quiet mode too.

all sharing from main point, but main fuse can change to C32 at lease

Not sure never used before, seem like nice design.

How much lowerest temperature do u setting?

I get it, cause when start up not so cold, once it is cold and reaching 20 deg is consider really cold.

But you already in the sleeping.
So would effected your skins turn very drying.

Try to put a cup of water inside bedroom he he

If due to long term really not healthy for your sleeping.

Unless you try to ask Aircon man come to remove out whole fan coil and wash it with refill gas, to be save your waste power of money and more protector your skins too.

If not longer your wife definitely ask you buy more cosmetic to her again.