its a good idea, but just to make sure the air ventilation is good enough.

so what spec are u using?

Yeah, will probably have to unscrew the top and bottom cover. Using the side supports to hold the GPU in place.

3x MSI R9 280X (will get one last 280X and wait for NVIDIA and AMD's new cards, power efficiency FTW)
Stable at 755KH/sec each with OC to 1075MHz
UV to 1.080V

liddis also can..

LOL, that is genius.

whats your average temp? im still constructing my set yet.. facing some problem with the psu and the riser.. monitor aint showing anything when running 2x 280x dcu2 with usb3.0 riser..

my not so impress design..



i never thought of getting pcv pipes would make a good design lol.

perhaps my 2nd rig will do it like that.. if i have the chance to get 2nd rig lol.

My average temperature is around 68C to 73C for all cards depending on the time of day.
At stock voltage it's over 80C

This post has been edited by barbar554: Feb 23 2014, 10:51 AM

normal cooling only? any extra cooling units?

I have one table fan blowing at them.

becareful your Dcu2 asus when working around the motherboard, the fan blade is jutting out abit.. hit my palm then broken..




luckily still can run cool cos the cooler design is very good.

this frame looks like you just wash the GPU like dirty plates, and waiting for it to dry..

Hey guys,

Wanna ask a question. Which exchange do you normally use to convert doge to USD? IINM it has to go through BTC first right?

Also want to know which method do you guys use to withdraw the funds.. bank wire, bank draft etc.?

There are ways to convert DOGE to USD. But usually DOGE to BTC most of the time.

I use Bitstamp to withdraw my funds using their international wire transfer.

well, still trial and error.. and btw, since u and mine are the same card, do u mind share the entire code with me? i have no idea why aren't working at all.. when i launch cgminer, then it stopped working...

im a 1st timer btw..

u need to dump all your code here n see.. sometimes just one comma missing also program will not start,

" setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer --scrypt -0 stratum+tcp://hot.wemineltc.com:3335 -u chook.1 -p 1234 --thread concurrency 8192 --lookup gap 0 --gpu engine 1100 --gpu memclock 1250 --gpu-powertune 20 -w 256 -I 13 -g 1"

Honestly I have no idea what that is from the thread concurrency part lol

I usually convert DOGE to BTC. why deal with USD? It's a debt based currency.

buzz me if you wanna sell btc.

ini macam i dunno how..

hi guys, i just bought amd card and would like to mine bitcoins or litecoins.. may i know what is the use of these cryptocurrencies mining? i googled and read but i don really understand what it is use for..

Would anyone be interested in Gridseed miner (1 set, 10 units) for RM 10k?


http://www.cybtc.com/thread-4792-1-1.html


Send pm. Let me know soon as I will be ordering tomorrow.

i tot this gridseed was a crap ? IMHO better get 290x hehe . .