how to put a ping command on rooter ...?

rooter come with built in ping command,

login LuCI -> modem -> connection -> keep connection alive -> enable

that's the ping command

tq mr chuah....

u can choose which one u want,

enable = just only ping the connection
enable with wan restart = it will restart your modem connection once the ping detect failed
enable with modem toggle = it will restart the power to your modem once the ping detect failed,.

Added to the first page.

personally

i found out that enable with wanrestart and enable with modem toggle is both quite similar,..

either one of them can do the auto reconnect job easily,.

but enable with wan restart is much faster in reconnect compare to modem toggle,.

This post has been edited by chuahcs79: Nov 21 2013, 09:58 PM

Under normal case a power cycle is not required.

Unless some weird power issue faced by newer LTE modems and more.

yeah wan restart is the best choices so far

blacktubi chuahcs79

this q may go out of topic.. but i'm wondering can i team the lan ports on the router? meaning making link agregation..

If you mean bonding aka load balance, yes it is possible

BUT, it is a long process

can rooter firmware sedot other wifi ...

hi chuahcs79,

how do u resolve Auto DC issue? my rooter with e3276 sure will DC whenever keep it on overnight.

can explain more on the unswitched/switched part?

thank you

mean log in another wifi router's AP bridge?


if that then YES, rooter able to do that.

This post has been edited by lpc26: Nov 22 2013, 03:54 PM

yeah... let say... i got

1 yes zoom

1 maxis bb

so.. can combine the speed...?

u want to load balance through wifi? no..
ur talking abt bonding or link agregation..
physical connection is the one feasible to do it..
wireless cannot..

oh combine speed.... Rooter don't have that function, you must get a Load Balancer.
btw wifi not allow to load balance, all u have to use cable to connect to the device.

I thought you want to do AP station.

This post has been edited by lpc26: Nov 22 2013, 04:51 PM

u have to choose these option under keep connection alive
best choose wan restart, then it will auto reconnect

enable = just only ping the connection
enable with wan restart = it will restart your modem connection once the ping detect failed
enable with modem toggle = it will restart the power to your modem once the ping detect failed,.

wireless bridge from other wireless router ?

yes, you cam,

just go to LuCI 192.168.1.1 -> network -> wifi -> click Scan -> Add -> key in the wireless password -> click save and apply

did you mean once using "enable with wan restart", the info will changed as below?

Unswitched Vendor ID
12d1

Unswitched Product ID
1506

currently my rooter still showing Unswitched Product ID = 14fe

can advise how to change it Unswitched Product ID = 1506

Erm, 12d1 14fe means CD Mode. Anyway that wont make a difference.

If you want a good solution, maybe there will be some soon.