Yes??? which ROOter firmware?

Ah, I thought is Go. Thanks.

This post has been edited by rootlinux: Nov 26 2013, 09:55 PM

TP-Link TL-MR3420 v1 + Huntsman 2013-11-10red / LuCI Trunk (svn-r9933)

How u connect to Huddle from MR3420 v1? Thanks.

direct usb data cable, i guess

That is pretty interesting. I want to know how it able to get it connected as WAN.

Plan still ok..maybe my area signal bad,but watch via hulu just now so smooth

well,
probably huddle is the one dial the connection then issue DHCP IP to rooter,..
similar situation like my 753S mifi i guess,.
on the hostless mifi modem driver ..

sometimes congested during certain peak hour in your area is the main key as well ,..

Yup my 753S don't work on MR3420 v1 and WR1043ND with ROOter firmware.

+99
mr chuah so clever maa....

hi..im just buy Huawei E398 for my broadband modem...i want to ask sifu here...is it Stock firmware TP Link TL-MR3040 compatible with the device?

thanks....

u refering for your E398 working under 3G or 4G ?
it should be compatible,
if not, u always have alternative choices to flash to Rooter firmware

This post has been edited by chuahcs79: Nov 27 2013, 05:11 PM

anyone succesfull to install wshaper in R00ter? I got the kernel 3.10.8 error..



This post has been edited by lukemanz: Nov 28 2013, 12:42 PM

under 3G at the moment..4G later will try...owh...my version for TP-Link MR3040 is V2...im still newbie...later on if not compatible..i will ask sifu here...

This post has been edited by archangel1989: Nov 27 2013, 06:51 PM

Anybody able to install openvpn on ROOter latest firmware? If yes mind to guide me.

if u are using 4MB flash memory router like MR3420 V1, V2,. is hardly left any empty space to install openvpn, let alone to save the config to it...

8MB flash memory router will be much suitable for this, like 1043ND, and a few more new model




This post has been edited by chuahcs79: Nov 28 2013, 03:11 AM

what do you mean by this "let alone to save the config to it... "
english not that good mah.

btw video is broken.

i mean for normal router which only have 4MB flash memory, u dont have enough left over empty space to install openvpn packages and set it up,. ( unless you are PRO in linux and able to modify to slim down the size of openwrt firmware ),

otherwise 8MB flash memory router would be best choices,..

there is a solution to install openvpn on your 4MB flash router,
u need a powered USB hub with pen drive ( 2 or 4GB ) ,.

then u will need to flash your pendrive to ext4 and linux swap both option,..

then u will need to install exroot in your openwrt firmware,.

you can search how to exroot in youtube ,..

from there u will have extra space left over on pendrive to install any other packages,..

for rooter wise i am not quite sure whether exroot will be working fine or not since i personally not yet tested

This post has been edited by chuahcs79: Nov 28 2013, 10:38 PM

Does E398 works with Huntsman 2013-11-23?