Dont looks like a big deal to me, few dBm is usual

Lock the frequency if you want just to make sure it dont jump tower

the E3276 did jump to dunno what tower and become GPRS today...Off On then become normal.

Then lock the frequency and Network mode using MDMA

after use MDMA set 2100 then unable to connect

u can try doing that using AT COMMAND in rooter

what AT command for 2100 only?




LOL what a mess...



This post has been edited by lpc26: Nov 19 2013, 03:49 PM

You guys sure wanna mess with AT command on E3276?

No reset option and impossible to reflash and no known way to backup for now

Make sure =? And ? First before playing

you tried lock the 2100 at MDMA, then can use at rooter?

-------------------------------------------------------------

weird after MDMA, my old AT command unable to use already become ERROR (AT^SETPORT="A1,A2;1,2,3,10,12,13,16,A1,A2")

meanwhile AT^SETPORT="A1,A2;10,12,16,13,A1,A2" able to use already...kinda weird, and

after MDMA change to 2100 was unable to connect...after that I choose back auto for all band... also unable to connect.. then I check my AT code, it changed into AT^SETPORT="A1,A2;12,10,16,A1,A2" ..

I change to AT^SETPORT="A1,A2;10,12,16,A1,A2" and it WORKS.

This post has been edited by lpc26: Nov 19 2013, 04:25 PM

Can

best is leave the E3276 original condition for now until futher solution on flash update,..

ya the E3276 is too high tech already...but the best is the modem is not HOT... e398 is damn HOT.

not even warm,.. i leave the cover of the sim slot side open,.. he he,. so now the E3276 is totally not even warm

hi bro, need some help here trying to do repeater to expand my internet connection..

I am having a TP Link MR3420 ----> connected to E3276 Maxis LTE

I have a Aztech 605EW which I would like to run as repeater for the TP LINK. I have tried but duno where to start

finally i solve my Auto DC issue,.

using my E3276 on rooter 2013-11-10 red version rooter finally can solve with auto reconnect,

finally this is complete perfection for my E3276 with enable at keep connection alive option

with info below



if info below detect, it wont auto reconnect after DC



This post has been edited by chuahcs79: Nov 20 2013, 05:56 PM

Which one is better? TPLINK MR3420 or MR3040? I know that MR3040 is small, battery-powered but is there any other differences?

MR3420 is built for home use mainly while MR3040 is built for mobile /on the move use

do u use Lan connection from mr3420 to -> Aztech 605EW or wireless bridging ?

This post has been edited by chuahcs79: Nov 20 2013, 06:37 PM

Refer to this. It is flexible of course. you can configure to the way that suit you




This post has been edited by blacktubi: Nov 20 2013, 07:14 PM

So this is your home setup ?

I read that Asus N56U have problem on the 2.4Mhz wiFi Bandwidth , yours not affected ?

Btw, how to overcome the 25Mbps limitations of E3276 on ROOter as my area sometimes can have stable speed of > 30Mbps when LTE bandwidth is available to me like now.

Nope, this is for reference only, my home setup is very simple.
I dont face any issue on N56U. Dont buy N56U now. Get the AC56U

Hmm, this shouldn't happen as Rooter main purpose is to solve the 25Mbps limit on old proocol, are you using the latest version now?