Look at the output voltage

MR3420 run on 12V

So the DLINK adapter is not compatible right?

This post has been edited by MrSars: Jul 24 2014, 08:20 PM

Yup. You can try if you want.

Original TP-LINK adapter is RM10++ from TP-LINK

Oh got sell? Searching now or if you got a link can share

TP-LINK service center at LowYat Plaza

need to go in to router to reconnect my broadband, if not it will keep cut down the speed, any idea vf this problem?

Any idea how to reset the ip for openwrt?

Sometimes when my phone connected to certain ip that h@ve issue i had hardtime reset it even i restart phone or modem ==

Which setting i should browse through

WAN IP you mean?

Disable/disconnect the 3G WAN interface than enable

as long as it is AC to DC output adapter then will be fine. don't use AC to AC output like those bundled with Aztech modem.

last time i mistakenly put a AC to AC adapter to a router which need DC input end up the adapter broke, luckily the router still ok. that router needs DC 9V, a bit hard to find.

AC>DC 12V is easy to locate at pc shop, don't over voltage.

Wifi LAN ip

I don't understand what do you mean certain IP that have issue

If this is the case, then change your LAN to another IP range

192.168.2.1

Hey just wanna ask..
Im using Vodafone K5005 LTE modem..
why when using LTE, the modem connection like connect n disconnect all the time ..every 1 sec..
But when got LTE..the speed is just like 8mbps..
Helppp..
tq

Which telco u used? I have similar situation like u when using celcom.It had hard time to cconnect to lte. But no issue when i set use 3g as priority.

I think either lte signal is weak or no ready to us3d yet in ur area

Use celcom...
yeahh same..if set 3g as priority...can get to 20mbps..
hmm..
Im in University Malaya...
supposed to have 4g right..??.lol

anybody else experiencing the same problem ?

delete

This post has been edited by ramboo: Aug 2 2014, 12:58 AM

Which version on firmware u used? I used funnel web

hi,

please help/guide me, i got MR3420 + 3G modem, how can I manage and control all trafic/acces via Tomato,

mean , 3g modem + MR3420 > RT12N 'Tomato', every setting i try but cant handle it via tomato, please hep, thanks

ohh..i use the huntsman the red version..latest one

Hi. Hope u guys have a nice days.

I have a problem with e3276 + mr3420. It cant connect to 4g. I dunno why. If the modem connect directly to comp, it can connect to 4g.

Im using open rooter (red) the lastest one. My carrier is celcom. I dunno what is wrong. 4g working superb on pc but cant connect when using mr3420. Hope u guys can help. Really appreciate it.

Set to 4G only?