hi sifu. wan ask for e3276 modem must use y dual usb cable?

Latest ROOter can break the 25Mbps barrier




Thank You Wahronga Farm and frens

which router and modem u using?

TP Link MR3220 v2 flashed with many versions of ROOTer to use with the Huawei E3276 is crap. Worked twice only. After that, keeps complaining no modem present, although all I did was power off the router; no changes to (previously working) configuration whatsoever was done. Avoid this piece of sh1t.

Bought WR710N and flashed it to the latest version of ROOTer. Worked better than the 3220. To get it working, every time you power on the router, do NOT plug in the E3276 modem. Leave the router on for about 5 minutes before plugging in the E3276 and you will get connected automatically, every time. It's a pain in the @ss to remove the modem every night, yeah, but the number of (cheap) routers that works with the E3276 is very few and far in between, for now.

MR3020 works very well with my E3276. No need to do any manual work once you've set it up properly.

can check with others on their success stories using certain ROOter routers as well.

This post has been edited by maxcheam: Dec 24 2013, 03:14 PM

Get any 5V router, WR710 WR703 MR3020.

TP-LINK mess up their 12V>5V regulator so can't power up E3276 properly

most problem come from the router didn't give max 500ma to E3276, and some drain lots of ma while booting up.

small type mobile router(WR710 WR703 MR3020) which have smaller board consume less ma so can easily feed the power hunger modem

This post has been edited by lpc26: Dec 24 2013, 03:42 PM

so far my MR3420 V2 on 2013-11-10red rooter is working perfectly fine,. no such power issue at all

Your is V2.?

E398+1043ND [ latest ROOter ]

yeah mine is V2, just swap my power adapter to p1 modem type, and zero issue after that

This post has been edited by chuahcs79: Dec 24 2013, 09:40 PM

lastest huntsman stable ma?

Flashed MR3020 to the latest ROOTer Huntsman Red, working good so far. No need to wait for a few minutes after boot up to insert the E3276 to make it work properly. Using the supplied power adapter with no modifications. So, WR710N and MR3020 is good, while the MR3220v2 is pure filth

So far so good

If the Maxis LTE cell dun kick down to DC HSPA+ cell, its fine. Here sometimes LTE is for early birds only, meaning if I on my router late and the LTE IP taken up by users here, I cannot log in to LTE and on DC HSPA+ only. This is my work place hence I dun keep my router on 24/7. But 3G sometimes can get 16~17Mbps too

if use its origin power adapter, got any issues? n where to buy p1 modem power adapter?

dear all sifu,

im would like to update software on MR3420v1, which one is better huntsman (yellow / red)? im using the huawei e367.
tq

Does R00ter support usb hub, together with 1 modem + 1 HDD as network sharing?
Anyone tried that?

sifu, need help here. i m ad connected my e3276 with mr3420 v2, with huntsman 11-20 red version follow the first page. it is successfull conected and can surf internet normally, bt the problem is once 20mins later, the internet speed will decrease to 0.1 mbps from 4mbps. after i restart the router, the speed back to 4mbps again.how can i solve this???other sifu suggestion also appreciated.

sifus, how to get to port forwarding menu with rooter? i search anywhere but cant find it. pls help me

Sifu , my zte K5006 can use this ?? please help , thanks