hi guy can Crucial Ballistix PC2-6400 2GB Kit(D9GMH) and Crucial value PC2-5300 2GB Kit(D9GMH) mix together and when overclock is there any problem to it???? i use 680i motherboard..

thanks

hi guys...just wanna ask...
isit got big or little performance diffrence between single channel instead dual channel? i know dual channel is better.

edit : typoo

This post has been edited by alieamin: Mar 4 2007, 02:15 PM

On AMD K8, it's almost unnoticeable unless you benchmark it.

For Intel, I don't know.

mya i know what chip of this ram ?
the site say is MICRON DDR2 512MB PC2-5300 667MHz RAM


Attached thumbnail(s)

D9 Fatboy I guess. Well, you have to snap a close up shot on the chipset for us to identify. "MICRON DDR2 512MB PC2-5300 667MHz RAM" is just a description.

This post has been edited by Hyde`fK: Mar 5 2007, 03:17 AM

i bought DDR2 533 KVR 1Gb x 2 ram . Now OC stable at DDR2 780 . Don't know what chipset it use . can this chipset OC to DDR2 800 or more ?

This post has been edited by komag: Mar 5 2007, 08:20 AM


Attached thumbnail(s)

i cant csz ppl selling it at lelong.. i saw the chip kinda interest... fatboy not suppose only for DDR ?

fatbody not fatboy

the reason why the thing is called fatbody because the chip is BIG and WIDE, and it does not have any gender (which boy or girl is out of the story )

anyway... that chip is FAR from being fatbody, it's not fatbody at all... that if you have actually seen fatbody chips

it's just the low end D9xxx, not that overclockable. quite rubbish i should say.

---

Added on March 5, 2007, 10:35 amyou already got it in hand... just try it yourself. other people wouldn't know unless you give those to them to test.

the chips are labelled as PSC

This post has been edited by soulfly: Mar 5 2007, 10:35 AM

somrthing like this so big only call fatbody right?




Attached thumbnail(s)

correct correct!

okok, the chip is Big then DDR chiip = =
so the fatbody still can beat our Micron D9GMH/D9GKX or Hynix Fp-S5 ?

XD My bad on that.

Yup.

If you want to get D9 now, get from yehlai's bulk as quick as possible. Its the best offer you can find for now.

---

Added on March 5, 2007, 11:26 amHardly can match.

This post has been edited by Hyde`fK: Mar 5 2007, 11:26 AM

The only advantage of fatbodies is that it can run x-2-2-x latency, but at higher speeds, more or less just like the newer D9Gxx.

It's like BH-5 vs TCCD

The legendary of Micron D9 fatbody memory series chipset is still unveil again since this type of fatbody is stop production already......?? but is very rare right now......

If you look closely, the chips are labeled with Micron D9DQT
Just get 1 or 2 sticks to play... If lucky you get yourself a rare gem, if unlucky lelong or garage sales then

any body get good clock with patriot ram?
my kingston ram mark as kingston... 667 go 900 =X

Anybody got any news on the D9DCL chips? I saw them lurking around winchance today.

temporary only tested up to DDR1000 with MSI P965 NEO-F
This board no Vcore adjust but vdimm up to 2.4v
RAM timing : 5-5-5-16, 2.1v or 2.2v forgot already...
at DDR800 default speed able to 4-4-4-12.
A very standard speed/timing.



With ASUS P5B E-PLUS (C2 chip) :
RAM timing : 4-5-5-15, 2.15v

i would consider those as low end rubbish, no where near D9Gxx

Lurking around lowyat for the second day, still can't find any good chips.

FP-C4 ones seem to be phased out and replaced with FP-Y5.
That's what National Service does to you. Wastes your opportunities. =.=


Trying to order something from yehlai.. Else do you have anything else to recommend Soulfly? Thanks ya.