isnt it stated there on the screenie

cstkl1 , good pair or reaper u got there....... 1.84v for DDR 1000....

incredible.....

cstk1,


What is the batch number for the CPU that was used?

i just got a 2x 1gb kingston-800mhz on CL5. so just wondering if i can get more out of it without too much trouble (mobo is asus p5ld2 se)?



Also, in the screenshot above, i have 4 RAM slots total used which is my old 2x512mb(512mhz) and the new 2x1gb(800mhz)... is it ok to match all of them together?

TQ sifu-sifu!

just use dual channel, or two slots of ram only.. for better ocing unless ur rams are incredible to be oc-ed using all 4 slots

of course its ok to put them all together but the downside is, it will run at the lowest speed which is 266MHz (SPD) as shown in the screenie.

for me, its better if u take out ur old 2x512 and let alone the 2x1gb run at dual channel+800Mhz speed.

This post has been edited by BlackThyra87: Jul 10 2008, 11:50 AM

ok.. i get you.. since i don't really need up to 3gb of RAM, it's better to cut it down to 2gb which will make it run at faster speed yeah?

yes basically And its also easier for you to overclock

dude its a flaw on asus striker 2 formula

its 1.31v.. but on vmm its 1.28v

cpuz cannot read it properly..

---

Added on July 10, 2008, 6:25 pmany of the PC2-8000's can do this even the gskill's

they all are microns..
the pc2-8500 4gbs onwards nowadays are pcp.. which are not that bad also..

the highest clocked microns 4gbs are still the ocz pc2-9200 flex 2 which is sold out and back to back order word wide..
cause so far the only 4gb kit that can do 1200 CL5 tRD 7 on 500 fsb...


This post has been edited by cstkl1: Jul 10 2008, 06:25 PM

PSC chip in G.Skill 9600CL5D-4GBPI
http://valid.x86-secret.com/show_oc.php?id=387046

anyone here knows how to handle a corsair 1066 rev1.2.. advise me.

funny.. u were talking about 1066mhz

i was thinking of some too kekeke



This post has been edited by cstkl1: Jul 11 2008, 12:16 AM

haha, i have dominators at the moment, i am trying to get some help on how to clock some rams

wow.... thats well over 1.5Ghz man... which is RARE!!

coolaler pwnz! XD he's a lagend.

yeah coolice.. is crazy ocer lol...

lol its not coolice.. look deeper... its COOLALER

the lagendary overclocker.

dont tell me u dont know him lol..

This post has been edited by BlackThyra87: Jul 11 2008, 11:21 AM

icic thx for the info cstkl1, may be i go look for a pair of these 4gb too.

most i see manage to get 1000mhz only above 1.95v, seldom i see can get lower. may be i'll try see mine can go or not.... long time never tweak the rams already hehe

well i agree PCP is not bad at all,

some of the pcs chips the gskills pc2-8800 can do 1000mhz at 1.77v...

thats the lowest i have seen on a 4gb kit for 1000mhz 1:1

i dont know him sadly, doesnt make me feel any greater knowing him either...

hye guys...cn someone here pls gv ur opinion abut the OC performance of crucial 10th anni