Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
19 Pages « < 5 6 7 8 9 > » Bottom

Outline · [ Standard ] · Linear+

 MSI Gaming Notebook V.II, The Refreshed model yet more powerful!

views
     
Unseen83
post Sep 12 2013, 10:24 AM

TooFAT4U 2Handle!
*******
Senior Member
2,337 posts

Joined: Dec 2008
From: KING CANNEL JB
QUOTE(Eiraku @ Sep 12 2013, 10:21 AM)
Actually, how DO you transfer the F3 hidden partition to an SSD? Full disk imaging with Acronis?
*
yup i guess so cause when i purchase NB i upgrade to SSD they clone with F3 function to SSD from HDD seem to be working just fine.. smile.gif
Unseen83
post Sep 12 2013, 12:27 PM

TooFAT4U 2Handle!
*******
Senior Member
2,337 posts

Joined: Dec 2008
From: KING CANNEL JB
QUOTE(davidmak @ Sep 12 2013, 11:18 AM)
By the way according to the MSI engineer, they can make it in such a way the MSI factory partition will remain in your now secondary HDD. But all the boot partitions will now reside in your new SSD in primary bay.

When you press F3, you can perform recovery as usual. Just that it will recover to your SSD. So it must be some insider tweaks. I decided not to proceed because its worth the money. I prefer to fall back to drive imaging recovery method. Because all my applications and settings are maintained.
*
oh i ask/requested the technician to put recovery on both my SSD and HDD.. just in case...
Unseen83
post Sep 12 2013, 12:48 PM

TooFAT4U 2Handle!
*******
Senior Member
2,337 posts

Joined: Dec 2008
From: KING CANNEL JB
QUOTE(davidmak @ Sep 12 2013, 12:33 PM)
Just took delivery of some nice Samsung DD3L modules. biggrin.gif

No problem so far. Everything rock stable. Guess the machine really needs DDR3L.

Unseen, whats your max CPU temps where you're gaming? Mine went till 87C on gaming mode. Also my Sound Blaster Cinema app doesn't seem to remember the settings I made. After restart it went back to defaults. Strange. Is it same in your setup as well?
*
how much samsung L ram? i got my Crucial RM440 for 2x8GB 16GB L RAM
x
hmm i think ur notebook got Gremlin... lolz baptizes NB yet? blush.gif my Cinema seem to remember setting i set for it unless you plug external speaker/headphone... smile.gif seem to work like charms smile.gif

x
CPU temp i currently at work ... later on i post my CPU temp i capture HWinfo64 and Speccy if not mistake is max 66C-70C during Tomb raider/Crysis3 all MAX... but if you look past posting on this THREADS you see i post few TEMP of my system smile.gif

Edit: got RAM LOW VOLTAGE MR STORM88!

This post has been edited by Unseen83: Sep 12 2013, 12:52 PM
Unseen83
post Sep 12 2013, 01:09 PM

TooFAT4U 2Handle!
*******
Senior Member
2,337 posts

Joined: Dec 2008
From: KING CANNEL JB
QUOTE(davidmak @ Sep 12 2013, 12:54 PM)
Yeah, not having a lot of positive energy with the laptop yet. LOL! But we're catching up. It'll be nice tongue.gif

So you're Cinema app remembers? I mean when you move the base slider, it'll remember after restart. Damn this is weird.

Wow... 70C max temps? With cooler boost on? Mine is without. I don't see signs of throttling when gaming. Except some micro stutter once in awhile. Still haven't solve this yet. Some say is the beta driver. GPU temperature hovering in the region of 60-65C which I think is quite good.
*
yes... need positive energy surround NB..lol this GT70 suppose be my temporary kinda waiting Asus G750JH smile.gif

x
yes.. hmm i need to recheck it... just sound really loud/clear during Gaming/music so don't really bother with it.. blush.gif

x
think go just average 66C cpu.. no turbo boost hate noise but i am in Air-cond ROOM temp 21-23C and Thermal paste IC diamond... 10 days ago... driver i use nvidia 311.84 from MSI download.. smile.gif
Unseen83
post Sep 12 2013, 01:17 PM

TooFAT4U 2Handle!
*******
Senior Member
2,337 posts

Joined: Dec 2008
From: KING CANNEL JB
QUOTE(davidmak @ Sep 12 2013, 01:13 PM)
Ah you repaste the CPU already. I haven't done this yet. How did you remove the heatsinks considering they are not bridged together? My guess is to take both GPU+CPU heatsinks as a single big piece? I have some nice paste that I bought a year ago.

Here no aircond but natural one tongue.gif. Around 20C day time. But summer is going to be hot.
*
no i did not unauthorized repaste cpu/gpu... i watch it on **youtube is a suggestion smile.gif
Unseen83
post Sep 12 2013, 04:26 PM

TooFAT4U 2Handle!
*******
Senior Member
2,337 posts

Joined: Dec 2008
From: KING CANNEL JB
QUOTE(MSI-NB @ Sep 12 2013, 04:19 PM)
The warranty sticker is a standard procedure from HQ, so don't worry.  blush.gif
*
should not put there.. its hurting ppl/customer decision making process... on purchase AWESOME MSI G series...
Unseen83
post Sep 12 2013, 04:31 PM

TooFAT4U 2Handle!
*******
Senior Member
2,337 posts

Joined: Dec 2008
From: KING CANNEL JB
QUOTE(davidmak @ Sep 12 2013, 01:13 PM)
Ah you repaste the CPU already. I haven't done this yet. How did you remove the heatsinks considering they are not bridged together? My guess is to take both GPU+CPU heatsinks as a single big piece? I have some nice paste that I bought a year ago.

Here no aircond but natural one tongue.gif. Around 20C day time. But summer is going to be hot.
*
here my temp light program/ video/internet so on
Attached Image

x
here bench 3Dmark(2013)
Attached Image
Unseen83
post Sep 12 2013, 05:10 PM

TooFAT4U 2Handle!
*******
Senior Member
2,337 posts

Joined: Dec 2008
From: KING CANNEL JB
careful with IC diamond use as thermal paste... i notice it have corrosive effect on chip-set...
Unseen83
post Sep 12 2013, 07:48 PM

TooFAT4U 2Handle!
*******
Senior Member
2,337 posts

Joined: Dec 2008
From: KING CANNEL JB
hmm... should keep quiet... about it... sorry is not Corrosive"(wrong word ) it happen only when you in proper remove of thermal... then it become... let say IC Diamond have marco diamond dust even so in that form diamond is Sharp... so when you rub the IC Diamond the sharp edge of it scratch the surface of the chip but NO worried it wont damage it smile.gif unless you apply wait a day and rub it off then repeat it 1,000 time then you may damage the chip smile.gif so Chance of the ic diamond damage chip is 3 of 100 smile.gif
Unseen83
post Sep 12 2013, 08:44 PM

TooFAT4U 2Handle!
*******
Senior Member
2,337 posts

Joined: Dec 2008
From: KING CANNEL JB
QUOTE(Amal @ Sep 12 2013, 08:03 PM)
Very nice temperature there even while watching video.

But the one on 3DMark13, that is not the max temperature while running 3DMark13 right?
*
thx

x
yes i think it's the max... i got same temp for Tomb raider(2013) /Crysis3 i think is good temperature
Unseen83
post Sep 12 2013, 08:47 PM

TooFAT4U 2Handle!
*******
Senior Member
2,337 posts

Joined: Dec 2008
From: KING CANNEL JB
QUOTE(Eiraku @ Sep 12 2013, 08:18 PM)
Yeah I actually googled. Not "corrosive" like the other "corrosive" paste, it's actually "abrasive".

And I'd say the chances of scratching something is definitely higher than 3/100 with IC Diamond. Doesn't make it a bad paste, but definitely not newbie friendly when removing it.
*
smile.gif yes "Abrasive"
Unseen83
post Sep 12 2013, 09:46 PM

TooFAT4U 2Handle!
*******
Senior Member
2,337 posts

Joined: Dec 2008
From: KING CANNEL JB
QUOTE(Amal @ Sep 12 2013, 09:33 PM)
Hmmm.. Probably the counter got reset by itself.
Or you might have open the Hardware Monitor after you ran 3DMark13.
It needs to be run before you run 3DMark13.
Coz I'm seeing the Powers Package max is only 6.01W, which means it isn't running at full load.

Still, even if those are idle temp, it is still a very good temperature compared to my W230ST.  thumbup.gif
*
haha mucho Gracia's ! yes it running while 3D mark is benching 3Dmark don't seem to stress my GT70... only get stress playing crysis3 6hour while surfing internet/ watching HD movie (setting is on 3 LCD include notebook)
Unseen83
post Sep 12 2013, 10:11 PM

TooFAT4U 2Handle!
*******
Senior Member
2,337 posts

Joined: Dec 2008
From: KING CANNEL JB
QUOTE(davidmak @ Sep 12 2013, 10:03 PM)
Any idea what was your maximum CPU temperature then?
*
pmd biggrin.gif
Unseen83
post Sep 12 2013, 10:40 PM

TooFAT4U 2Handle!
*******
Senior Member
2,337 posts

Joined: Dec 2008
From: KING CANNEL JB
QUOTE(xFreedomBoix @ Sep 12 2013, 10:34 PM)
Wanna ask..
both the GE40 don't have backlit keyboard right?
The GE60 20C 3699 one also don't have?
*
it come with SteelSeries but only BLue backlit smile.gif

Edit: you can purchase SteelSeries backlit with full led light show smile.gif cost you RM 450-600

This post has been edited by Unseen83: Sep 12 2013, 10:41 PM
Unseen83
post Sep 12 2013, 11:15 PM

TooFAT4U 2Handle!
*******
Senior Member
2,337 posts

Joined: Dec 2008
From: KING CANNEL JB
i say get MSI GX60/70 ADD 16GB 1866Mhz RAM+ SSD:) if compare to GE60/70 price and performance...
Unseen83
post Sep 13 2013, 12:33 AM

TooFAT4U 2Handle!
*******
Senior Member
2,337 posts

Joined: Dec 2008
From: KING CANNEL JB
QUOTE(xFreedomBoix @ Sep 13 2013, 12:32 AM)
This mean all GE40 and GE60 20C series have blue backlit?
hmm.gif
*
only GE60/70 not ge40.. well check with erkaru
Unseen83
post Sep 13 2013, 01:26 AM

TooFAT4U 2Handle!
*******
Senior Member
2,337 posts

Joined: Dec 2008
From: KING CANNEL JB
QUOTE(xFreedomBoix @ Sep 13 2013, 01:21 AM)
Now I think I will stick to GE60 i7 gt750 or ge40 if budget not allow..
If budget allow.. GS70 brows.gif

btw.. GX60 with 16gb 1866 mhz ram will be enough to cover the bad APU performance in daily task n programming?
*
GE60 20E have baklit(blue only...) ask MR.storm88 if he can confirm this

x
yes.. improve. with ram upgrade must be 16GB 1866mhz ram

Edit: i would again recommend GX60 good buy if you want to GAMING under budget smile.gif price under RM4K

This post has been edited by Unseen83: Sep 13 2013, 01:31 AM
Unseen83
post Sep 13 2013, 01:33 AM

TooFAT4U 2Handle!
*******
Senior Member
2,337 posts

Joined: Dec 2008
From: KING CANNEL JB
QUOTE(xFreedomBoix @ Sep 13 2013, 01:30 AM)
will it be enough for heavy rendering task?
Cause I'm taking software engineering for my degree coming year.. lol
*
then buff your budget... get GT70 20D... RM6.7K

Edit: for Thirds time i recommend you get GX60, later on when next year you up RAM add SSD smile.gif

Reference
http://www.anandtech.com/show/7111/amds-a1...gaming-notebook
x
http://www.notebookreview.com/default.asp?...gaming+notebook

This post has been edited by Unseen83: Sep 13 2013, 01:38 AM
Unseen83
post Sep 13 2013, 09:57 AM

TooFAT4U 2Handle!
*******
Senior Member
2,337 posts

Joined: Dec 2008
From: KING CANNEL JB
QUOTE(Eiraku @ Sep 13 2013, 09:46 AM)

Still standing by my recommendation of the Illegear RE15 though.
*
blink.gif Blasphemy!!! in MSI !!! this act will cost BAD luck for ur GE40!! lolz
Unseen83
post Sep 13 2013, 10:16 AM

TooFAT4U 2Handle!
*******
Senior Member
2,337 posts

Joined: Dec 2008
From: KING CANNEL JB
QUOTE(Eiraku @ Sep 13 2013, 10:07 AM)
Lolol. I'm a honest recommender. If the GT60 comes out and it's good, I'll recommend that one wholeheartedly. But for now, for his specific needs (low heat, programming, around 4k) there's not really anything I'd REALLY recommend except for the GS70.

I is the no fanboi...  Bought my GE40 because it was perfect for my needs, warts and all.
*
hahaha GT60 is out and is awesome! but price is over RM4K... hmm sup with high demand low budget... people! lolz

x
don't lie! ur Biggest MSI FAN BOI!! on here!! pimping ur GE40! lookalike stealth jet Fighter or Apache heli tongue.gif
« Next Oldest · Notebook Specific Discussion · Next Newest »
 

19 Pages « < 5 6 7 8 9 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0421sec    0.73    7 queries    GZIP Disabled
Time is now: 1st December 2025 - 12:36 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.