QUOTE(Noobdao @ Sep 4 2013, 09:38 AM)
Please dun use Eric VS anymore....Bcoz internal dun have safety fuse, and capacitor not enough for car, that why is start to dim or what....I am not promoting my product, and not want to say my product is good, but what my fren bought Eric VS, he said that the capacitor too less d...Not enough for a car, and the price same as what I selling right now...Not worth at all.....U can go to my post got a person report him d...I wan to say he is not my fren...That all~~~
Hi Noob, come on please be ethical abit, on-line is same as real life, whatever you have said is count on you.
THis is what i have mentioned to StevenLim88
QUOTE
I think you don't understand how fuse works. Let me furnish you some idea.
Fuse is just a line of wire with crimp with some shade that normally made from zink (like your car's fuse box, and agu or ANL fuse). so when excessive current pass thru the conductor, it cannot withstand the heat and break off.
The so called real fuse that you mention is something with casing, however you do not know that the actual working thing as fuse is just the wire inside the casing.
Ok why i solder the fuse in-line is because i was using AGU fuse with a casing and the glass (same as i use)but many defect has been reported on that fuse due to premature broken in the solder inside. Then i decided to make my own fuse which is 100% reliable and secure in the solder that i do myself. The outter side is glass not aquarium pipe
And this is his reply:
QUOTE
Ok... Thanks your reply... Ok... I accept what you reply... And sorry again about the comment... I would like to say... After install my gc, I feel better respond from the engine and pedal... And I admin.. your vs got help a bit on the respond also... But actually not what I expected... For starting I have no idea about the vs till now I know the vs and gc actually not really help a lot in my car.. that only can make the voltage stable a bit... But what I can say is... I expect too much on your vs and my DIY gc.... And I am an engineer, but sure my knowledge on the vs not like you so powerful... And actually what I think is sure have some negative comment from your user... So if can clearly explain to the negative comment, then I think this can make the others people see you are a really honest and professional seller and vs designer... I satisfied what you reply to me... Why dont you just reply to my comment and public it out? Anywhere, thank you share your experience...
The VS that you stock in from China, i have a few in my garage 1-2 years back as part of my research equipment. well if such high capacitance VS works, then you don't need a VS at all, because your battery is already VS witih huge multi-farad capacitance. Too high capacitance on 1 pcs of capacitor (i.e. 80K uF) will act very slowly can't filter ripple signal which happens at 1-50ms
Same as audio capacitor can that rated at 2-10 Farad (2,000,000 uF) cannot be served as VS because they are charge/discount much slower than smaller caps. That's the reason why building a VS need to be small and big combination to be able to filter ripple voltage.
Noobdao, do you know all these ?
As in Light dim issue, etc, i provide 2 years warranty, pm me to get it answered and solved or get a replacement unit is a wiser choice isn't it?