Bro whats the password ?

ahhh --- www.lenovohome.net

This post has been edited by jeisern: Dec 15 2013, 04:19 AM

stuck..


12/15/13 04:41:01.873 INFO : Port 0/0/1 #0: IFW flash success - SN : 139AC35FE77D4696
12/15/13 04:41:01.873 DEBUG : Port 0/0/1 #0: IFW flash success on device 139AC35FE77D4696 with state IFWI successfully flashed... REBOOT
12/15/13 04:41:03.066 DEBUG : Port 0/0/1 #0: SOC Device is disconnected - state:2 - status - IFWI successfully flashed... REBOOT
12/15/13 04:41:03.067 DEBUG : SOC device lost on port 1
12/15/13 04:41:25.221 DEBUG : New SOC device -> serial: 139AC35FE77D4696 port: 1
12/15/13 04:41:34.556 DEBUG : Port 0/0/1 #0: SOC Device is disconnected - state:2 - status - IFWI successfully flashed... REBOOT
12/15/13 04:41:34.556 DEBUG : SOC device lost on port 1
12/15/13 04:41:59.682 DEBUG : New SOC device -> serial: 139AC35FE77D4696 port: 1
12/15/13 04:42:09.258 DEBUG : Port 0/0/1 #0: SOC Device is disconnected - state:2 - status - IFWI successfully flashed... REBOOT
12/15/13 04:42:09.258 DEBUG : SOC device lost on port 1

Use Google translate to translate the page:
http://lenovo-forums.ru/topic/1423-faq-%D0...%BA%D0%B5-k900/

Anyway, I'll explain what I did

1. Download all the necessary software:
IntelAndroidDrvSetup1.2.0 - http://lenovo-forums.ru/Files/OS/K900/Inte...vSetup1.2.0.exe
iSocUSB-Driver-Setup-1.0.2 - http://lenovo-forums.ru/Files/OS/K900/Tool...Setup-1.0.2.exe
ManufacturingFlashTool_Setup_6.0.2 - http://lenovo-forums.ru/Files/OS/K900/Tool...Setup_6.0.2.exe

2. Install IntelAndroidDrvSetup1.2.0 (You can refer to the Russian website to see the screenshots, installation is straight forward)

3. Install iSocUSB-Driver-Setup-1.0.2 (You can refer to the Russian website to see the screenshots, installation is straight forward BUT take note at the last step of installation where it asks you to connect your phone to your PC, and do a restart so that the driver the installed properly. Once you do that, you should see a popup on your PC saying that a new 'CloverviewPlus' device has been installed successfully.)

4. Install ManufacturingFlashTool_Setup_6.0.2.

5. Run the Manufacuring Flash Tool, to go File > Settings. Follow the settings in this screenshot:


6. Disconnect K900 from PC and power off K900. At the Manufacturing Flash Tool, navigate to File > Open and select the xml file of the ROM you want to flash. (I've tried an xml of a rooted ROM, and it fails. If you have no original ROM, download this: http://lenovo-forums.ru/Files/OS/K900/K900...Usign_full.rar)

7. After you have selected the xml, the Manufacturing Flash Tool should state that flashing is ready. Then, just connect your K900 to your PC and the flash should start automatically.

8. Once successfully flashed, disconnect K900 from PC and start your phone. The ROW I provided is 130602, super old one, but can update to latest ROW. From here, I flashed to 131010 rooted and all goes smoothly


I tried using the xFSTK method (from xda forum), but I always get "SOC device is disconnected". The Manufacturing Flash Tool is automated, hence much simpler. I think this process is similar to SonnyCooL's method

MFT i get SOC device lost on port 1.....

Try my method, make sure you install the drivers properly. Also, when you want to flash, make sure the device is OFF, then connect the USB to it. Once you connect the USB, K900 will automatically switch on and flashing should start.

Status Update :

Now am at - fastboot -s Medfield22C96C4C erase factory
Screen is blank

17%

Screen will always be blank
Just hope that the percentage keeps on increasing

oooo


12/15/13 10:15:18.686 INFO : Port 0/0/1 #0: fastboot -s Medfield22C96C4C erase factory
12/15/13 10:21:59.184 WARNING: Port 0/0/1 #0: Process TIMEOUT Failed to execute "fastboot -s Medfield22C96C4C erase factory"
12/15/13 10:22:01.193 WARNING: Port 0/0/1 #0: Retry to execute fastboot -s Medfield22C96C4C erase factory

i read that there are some apps not supported on Lenovo K900. normally it is games or user tools?

step of installing those tool, is very important

This post has been edited by SonnyCooL: Dec 15 2013, 12:34 PM

Very true, i lupa install in windows xp compatibility since i use Windows 8

ok back online hehehe

Unbreakable K900...
Btw any1 successfully flash the 131010 root?
Sounds like many gets bootloop.

Me! Successful but need to go through the unbrick process ><

Maybe it's because we flash from VibeRom? Could it be the reason? Last time when we use VibeRom, we had to flash the VibeRom inb file, then flash the system.img.gz. But now, we just flash directly to 131010 system.img.gz. What I think is, the proper process should be flashing back to the original inb, then only flash to 131010 system.img.gz. Just my 2 cents

Flash back to row Than T card flash to 131010, everything ok now, waiting see battery can drop below 15% or not

Me oso up to 131010

Ur Roman missing boot.bin files

There's boot.img though. I downloaded the same 131010 rooted ROM, still missing the boot.bin file, so I guess its normal..

If tonight nthng to do than flash vibe, add boot bin in 1301010, see it work or not . . .

Now 18% d . . .