This is another reason why drop vibe :

With waze n in car charger.

ok all the sudden, my phone was able to charge again.. and since i already clean wiped everything i was wondering if i should flash vibe now or not ? what do you guys suggest ?

Download a copy of the official rom first, you might not like viberom. After reverting to 131010.. I feel like I'm using my k900 nicely again

is it rooted ? can i am currently on 130101.. can i root it ?

i trust u bro .....
i will flash it tomorrow, now tired after long trip

What is rooted? Ronald_loulan has provided a 131010 root:
https://www.dropbox.com/s/0ovgnfuedl19fg4/K...onlyROOT_sd.zip

reflashing now ...
btw fastboot fail and boot.bin is missing is that normal ?
now waiting for it to boot up .... go mandi first

my one take forever to boot man .... i think 20 minute still not boot yet

kekekeke i oso tried to flash now i oso stuck in lenovo screen mind sharing what u did following the russian site ?

where to get the xml ? just download the xml and flash it and then reflash the 131010 ROM ?

welcome mate ...
do u see boot.bin missing warning during flash ??

yep that is like the same when flashing vibe rom for root.....so i ignored.

now me flashing old firmware now .... 77% hopefully it come a live again
flash old firm succes .... my unit alive again, now try that 130010 thing


This post has been edited by SonnyCooL: Dec 15 2013, 02:45 AM

how u get the old firmware in ?

previously download

Lenovo K900_1_S_2_009_0164_130524

This post has been edited by SonnyCooL: Dec 15 2013, 02:48 AM

i mean on to the phone ? how to access sdfuse again ?

i follow this : watch out the part i bold (red)
Hi,



sure, but use at your own risk ! Be sure to have a backup of all your phone data on your pc as the phone will be flashed and all content wil be erased.



First, download the necessary software :



http://pan.baidu.com/share/link?shareid=48...1714291&third=2



In the archive, you´ll find two subdirectories, one containing the k900 tool, one containing the rooted rom.



Unplug any plugged K900 devices from your usb.



Then step into the directory with the k900 tool, then into the MFT 6.02 dir. Install (in this order) the intel Android driver, then iSoc USB driver, then xFSTk, then the MFT 6.02.



During the setup process of the drivers you are advised to connect your phone via USB and power cycle it. If you haven´t done then, do so now.



Then launch the MFT 6.02. Under file/settings set the following :



SOC Devices : VID 8086, PID 09EE

Android devices : VID 8087, PID 09EF


Check Override GP Flag : 0x80000045



Click apply, exit the menu.



Then select the flash file from the second archive directory. it should automatically show the only present xml file called flash-DVT3-CPU-sign.xml.



Now your phone should be connected via USB. Press and hold the power button until it turns off. Wait 5 sec. then press the power button for 1 sec to turn it on again. The flash process should start immediately.



DO NOT INTERRRUPT THE PROCESS ! Flashing the different components can take a while, and even if you don´t see any progress for several minutes it is still working.



Aftrer you see the flashing successful message, you phone will switch off. Close the program, and disconnect your phone. Switch on, and enjoy google play and root .... :-D



Best regards,

This post has been edited by SonnyCooL: Dec 15 2013, 02:50 AM

ok time to test

actually our phone cannot brick as long the intel tool is there .....
hahahahah now i update my sdfuse again .... with same message and it work
hhaha

This post has been edited by SonnyCooL: Dec 15 2013, 02:56 AM

working for u ?

not yet bro most likely besok i do becoz need to download the paidu 139/627 MB sleepy liao