alright...

hehe...saving $$$ to buy bro owi 16GB Team Xtreem DDR3 PC3-20800 2600MHz (10-12-12-31) Quad Channel kit 4x4GB memory...

This post has been edited by khaidir1976: Jul 21 2013, 01:14 PM

already been poisoned haha, if within my budget sure get one. will survey the price tomorrow

owihkhStasio

At what point u have to up ure tRDRD from 4.

yeah 2600's c10's

Whatever sham did.. the unclockable BFRs are clocking now.

Can't recall but should be 2800 onwards needing me to up tRDRD to 5.
I don't have any CPU to play with right now waiting for Costa batch lol.

Hmm than 2600 will be my 24/7.. thought before it always was up to 2400 only since everybody i see are doing 2600-2666 at tRDRD 5

anyway here is the final 2600 10-12-11-30 2T @ 1.625v.

Now to get to the hard part of running 1T.



This rams are really sweet. Thanks owikh.

Nice! G.Skill stock at 2.4Ghz CL9!

I noticed that the stock voltage at 1.65v... why not set at default (or slightly higher) and push the rams more?

Is it 2 x 4Gb and how much does it usually cost?

got it from owkih.
hmm its 4x4gb
hmm u really need to clock rams. this are rated at 9-11-10-28 but will do 9-11-10-27.

also this is tRDRD 4 for bFR at 2600mhz C10. The difference of 0.025v is because its not running 1t which will required @1.65v.

U really need to clock rams.

Scaling vs performance vs gain. Samething why not use ure cpu voltage at 1.4 and run ure vcore and cache 1:1.

Find the exact voltage. If not i dont call that clocking. I call that bantai.

btw as usual with 1t with this rams its giving so much trouble lol. same was 2400 1t was not easy.

btw i think tRDRD4 ends at 2600/2666 i think but again not easy.

This post has been edited by cstkl1: Jul 23 2013, 10:39 AM

I see.... only partially understand actually

A lot of unfamiliar terms for me.... especially that tRDRD part....

Nevertheless, those are sweet rams!

I also unfamiliar with lot of terms. Tried changing the tertiary timing to tRDRD from 6 to 4. You'll see improvement in benchmark. My poor RAM came with 2400MHz CL11 CR2

All rams are. To do 1t u need adjust some voltages.

But this depends on imc strength. Btw tech no diff between 1t vs 2t in real world.

My case two sticks easy .. 4 sticks at 2600 kindda hard but not impossible.

But the sticks so far are giving out at 2666. 2800 just can boot n enter windows with no stability at all. Just run aida will reboot.

Looks like bro you need CFR/MFR/Samsung for 2800+
wahh just noticed there are a lot of new 2800 kits listed in newegg.

2800

2933

3000

This post has been edited by owikh84: Jul 23 2013, 10:03 PM

yeah but lol i havent actually tried clocking two sticks yet.

but for now i really NEED some corsair Dom Plats 2666 C10's.

but hmm i like ripjaw Z. ure rams bro are really a beaut and stays cool and are low profile. always was happy with 4gb. then went to 16gb. saw the benefits with fast ram. dont think can go back to 4 or downgrade to 8 again.

This post has been edited by cstkl1: Jul 23 2013, 10:41 PM

Hehe...the power 16! .

Still waiting for nickshih to fix the 1T bug on CFR.





MC this whole week so will be free to test that little beast LOL

This post has been edited by owikh84: Jul 24 2013, 09:47 AM

Those are very odd default subtimings.

the tWRRD_dr/dd, tWRWR_dr/dd and tRDWR,dr/dd.

hmm must try these.

Tested the asrock timing configurator on m6e. Damn it shows all the correct timings except.. hmm i set tWTR to 9 but here it reads 10. I suspected as much. That that timing was not rite.

btw whats CMD_stretch??

This post has been edited by cstkl1: Jul 24 2013, 10:03 AM

Hi Team,

Im a newbie to OC. Im trying to get my hardware setup here. My budget is about 6K.

I already have the following

1. CM HAF X 942 with replaced SATA II to SATA III dock.
2. Seidon 240m W/Cooler
3. Core i7 4770K processor

I need the rest.

Please help to nominate the best

Regards,

TangenX

Team,

So far I have done lots of reading ...

I'm not a gamer at all.. I just want a blazing fast computer for video and image rendering and also fast browsing.

Wrong section. Theres basically 3 ppl clockin here n its more of testing ram capabilities.