Athlon XP - Nice cooling method
|
|
 May 12 2006, 11:01 PM
|
 
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned   
|
Intel got serious heat issue until now. I think it will be solved with conroe later. But ur AXP temp looks too high lah. I also worry.
|
Quote|
|
|
|
|
May 13 2006, 09:33 AM
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
hehehe....
yeah.... Intel had heat issues starting with prescott..  ouch... .hot !! my AXP will be cool DOWN in a few days time.... COnfirmed No LEAK on the new WC system. so after my last paper on Wednesday will i have the time to diassemble my pc and rebuild it to be DEAD sILENT !! |
|
|
May 13 2006, 01:55 PM
|
Junior Member
93 posts Joined: Oct 2004
|
QUOTE(zahri @ May 12 2006, 03:48 PM) erm.... 53c at 2ghz is not bad... what is the voltage we should use? mine 1.74 no OC woh. original speed somemore. XP2000 @ 1.6ghz i am at 56-58c @ 1.8 ghz @ 1.7v it hink.. ( stock heatsink )   |
|
|
May 13 2006, 02:06 PM
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
Wah, stock also using 1.74 V eh ? Try to go into bios and select Load Optimized Settings. That would reset the voltage to default.
|
|
|
May 13 2006, 07:21 PM
|
Senior Member
1,478 posts Joined: Feb 2006
|
QUOTE(uzairi @ May 13 2006, 02:06 PM) Wah, stock also using 1.74 V eh ? Try to go into bios and select Load Optimized Settings. That would reset the voltage to default. throughbred core are normally at 1.75 (t-bred a) or 1.65 (t bred b) |
|
|
May 13 2006, 07:39 PM
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
mine is at 1.65 or 1.6 tbred BLUR2.
tbred stuck in the middle hehehe.......1.75v stock.. .erm..... try lowering ur voltage. to 1.65v ?? |
|
|
|
|
|
May 13 2006, 07:48 PM
|
|
Senior Member
1,478 posts Joined: Feb 2006
|
u can noe ur default voltage from looking at ur proc core code...
|
|
|
May 13 2006, 08:15 PM
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
QUOTE(GKWong @ May 13 2006, 07:21 PM) throughbred core are normally at 1.75 (t-bred a) or 1.65 (t bred b) Mine stock at 1.53ghz @ 1.5v lah. Are u sure ? Mine T-Bred B also.  |
|
|
May 13 2006, 08:25 PM
|
|
Senior Member
1,478 posts Joined: Feb 2006
|
QUOTE(uzairi @ May 13 2006, 08:15 PM) Mine stock at 1.53ghz @ 1.5v lah. Are u sure ? Mine T-Bred B also. yup....ur mobo will detect it at 1.5v by default. mine wan also, if u din overclock the undervolt like that is ok...temp also low....but if overclock, then u muz raise it higher. |
|
|
May 13 2006, 09:14 PM
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
mine is tbred sesat huhu....
how come its at 1.55 sometimes at 1.65... weird..... its tbread AB hehehe...... Just Like GKwong said, can just see ur OPN code to know whats the default voltage of the processor... |
|
|
May 14 2006, 03:21 AM
|
|
Junior Member
93 posts Joined: Oct 2004
|
this is mine 1.74
 will try to lowerdown it and full load it again. how to see mine is a or b? or sesat? hehehe how come cpuz can detect my processor is xp2000+? i saw others forumer only stated AMD Athlon XP only woh.... 
This post has been edited by yloon: May 14 2006, 03:22 AM |
|
|
May 14 2006, 03:42 AM
|
|
Junior Member
93 posts Joined: Oct 2004
|
oooh no.. my cmos there is set to "by H/W" but i force it to 1.65
result voltage swithcing/jumping from 1.68v - 1.728v idle tempreture up from 43 to 50c now processor cannot full load at 100% only 86% to 100% This post has been edited by yloon: May 14 2006, 03:45 AM Attached thumbnail(s) 
|
|
|
May 14 2006, 03:58 AM
|
Senior Member
1,561 posts Joined: Feb 2006 From: Penang island
|
err...noob here...how much temperature to a pc consider very hot? my amd 3000+ venice always at 40-43 for no close pc around 3 weeks....if close it will be 33....is it mine consider hot a? should need any cooling part???
|
|
|
|
|
|
May 14 2006, 01:50 PM
|
|
Junior Member
93 posts Joined: Oct 2004
|
help help!!! after i play around with my voltage from by HW to 1.65 then 1.70 then back to by HW, now my idle speed is 54c. how come?
|
|
|
May 15 2006, 05:20 PM
|
Junior Member
175 posts Joined: Jan 2003 From: ¯\(¯Δ¯)/¯
|
Hmm I was using Alpha PAL8045 on my XP1700+ @ 2GHz 1.75v last time.. I should say it was good, idle around 42 and loads at 47~48 on 25c room temp.
 yloon: is your casing well ventilated? meaning the hot air from the casing is exhausted well from the casing and there's cool air going in from the front? it plays an important role too. Good Luck |
|
|
May 15 2006, 05:32 PM
|
 
VIP
12,925 posts Joined: Mar 2005 From: Kuala Lumpur
|
I am using a my old AMD Athlon 2400+ (T-bird) as a Server Box. I got RMClock installed with HTL Command [forgot that exact command]. It cools down my CPU up to 2-4*C when its idle..[So its around 52*C , bear in mind its with stock cooler and cheap chaplang fan]....Its pretty good , the downside , Windows Task Manager would report that the application uses 100% CPU Usage...[which is actually not]...Its pretty good
|
|
|
May 15 2006, 06:27 PM
|
|
Senior Member
1,561 posts Joined: Feb 2006 From: Penang island
|
weem....no any sifus here wanna answer my noob question?
|
|
|
May 15 2006, 08:23 PM
|
|
Senior Member
1,478 posts Joined: Feb 2006
|
QUOTE(intothefantasy @ May 14 2006, 03:58 AM) err...noob here...how much temperature to a pc consider very hot? my amd 3000+ venice always at 40-43 for no close pc around 3 weeks....if close it will be 33....is it mine consider hot a? should need any cooling part??? ur temp is considered very ok....just relax...stay cool...  |
|
|
May 15 2006, 11:15 PM
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
QUOTE(GKWong @ May 13 2006, 08:25 PM) yup....ur mobo will detect it at 1.5v by default. mine wan also, if u din overclock the undervolt like that is ok...temp also low....but if overclock, then u muz raise it higher. I din undervolt, that's the default voltage.QUOTE(zahri @ May 13 2006, 09:14 PM) mine is tbred sesat huhu.... Sometimes 1.55v, sometimes at 1.65v ? U got a voltage fluctuation there. What PSU ure using now ?how come its at 1.55 sometimes at 1.65... weird..... its tbread AB hehehe...... Just Like GKwong said, can just see ur OPN code to know whats the default voltage of the processor... QUOTE(yloon @ May 14 2006, 03:21 AM) this is mine 1.74 The reason why only AMD Athlon Xp is the speed is not the same like the official ones. will try to lowerdown it and full load it again. how to see mine is a or b? or sesat? hehehe how come cpuz can detect my processor is xp2000+? i saw others forumer only stated AMD Athlon XP only woh....
QUOTE(yloon @ May 14 2006, 03:42 AM) oooh no.. my cmos there is set to "by H/W" but i force it to 1.65 Why in the first place u forced it to 1.65V ? If you're not overclocking just leave it default.result voltage swithcing/jumping from 1.68v - 1.728v idle tempreture up from 43 to 50c now processor cannot full load at 100% only 86% to 100% QUOTE(intothefantasy @ May 14 2006, 03:58 AM) err...noob here...how much temperature to a pc consider very hot? my amd 3000+ venice always at 40-43 for no close pc around 3 weeks....if close it will be 33....is it mine consider hot a? should need any cooling part??? Its not hot at all. Dont worry, since you're using AMD64 u got Cool n Quiet which will throttle down ur cpu clock if there not much activity.QUOTE(prasys @ May 15 2006, 05:32 PM) I am using a my old AMD Athlon 2400+ (T-bird) as a Server Box. I got RMClock installed with HTL Command [forgot that exact command]. It cools down my CPU up to 2-4*C when its idle..[So its around 52*C , bear in mind its with stock cooler and cheap chaplang fan]....Its pretty good , the downside , Windows Task Manager would report that the application uses 100% CPU Usage...[which is actually not]...Its pretty good Its the same like CPUidle. CODE From CPUIdle official website - http://www.cpuidle.de/works.php QUOTE The CpuIdle Approach Under normal circumstances the CPU isn't always active but spends much time waiting for the keyboard, harddisk or CD-ROM. What would be more logical than to turn off the CPU for that period? That's exactly what the HLT machine instruction (Opcode F4) does. Whenever the CPU encounters a HLT instruction the clock is halted and the CPU enters suspend mode until an interrupt, NMI, or reset happens. With the advent of power saving microprocessors like the Cyrix Cx486S the HLT instruction elicits an additional benefit. When "Suspend on HLT" is enabled in the configuration register the processor not only stops on HLT but also enters the power saving suspend mode. |
|
|
May 16 2006, 02:01 AM
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
yeah,
it tends to fluctuate... erm.. im using the Coolermaster 450 purepower PSU ...... |
| Change to: |  0.0189sec
 0.57
 6 queries
 GZIP Disabled
Time is now: 20th December 2025 - 07:28 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.