used knob, cost me 45 bucks..car accessories shop plenty.should be less then RM100
but need do mod. by adding a solid tube sleeve to take up the diameter diff. coz our EB gearknob thread M6.
am half thinking to cut the rod shorter by an inch

This post has been edited by nacier5: Apr 19 2013, 09:42 AM


Attached thumbnail(s)

nope.. but i do change the seats to caldina.. hehe..

How much the cost of caldina seat? And how bout the railing?

Lots of haters said exora looks like a lorry or big ass van. I dont think so :-"


Untitled by xmox, on Flickr

Info:

What's The Best Way To Break-In A New Engine ??
The Short Answer: Run it Hard !


Why ??
Nowadays, the piston ring seal is really what the break in process is all about. Contrary to popular belief, piston rings don't seal the combustion pressure by spring tension. Ring tension is necessary only to "scrape" the oil to prevent it from entering the combustion chamber.

If you think about it, the ring exerts maybe 5-10 lbs of spring tension against the cylinder wall ...
How can such a small amount of spring tension seal against thousands of
PSI (Pounds Per Square Inch) of combustion pressure ??
Of course it can't.......
More info at http://www.mototuneusa.com/break_in_secrets.htm

Smoked an innova at Lekas hway last nite... As i get 180 it starting get scary to hold the steering one hand... Heheheh

I got smoked by innova few months ago

Wow... really scary...
Please take care.....

Got new shoes. Wedsport sa60m 17*9jj 25 offset


Untitled by xmox, on Flickr

U'll get ur revenge....

This is definitely nicer than the TE37... How much the damage ?

Not sure the actual price, should be more or less 2k. But im traded in with my rota and add another rm499.

This post has been edited by calmshot: Apr 21 2013, 09:34 PM

new here...exo owner...your rims nice...put it more flush...

Congrat and welcome to the club bro

1.5 fingers gap and -3.5 rear camber is enough for me currently huhuhu. Maybe will try to lower it to 0 gap, but need to do a bit flare at the rear fender.

This post has been edited by calmshot: Apr 21 2013, 09:42 PM

haha..my 1 front -2"...rear -4"...
tis saturday got joining flush meeting in damansara...?

BEST QC ever tercabut masa anak nak turunkan seat



This post has been edited by neo1point3: Apr 21 2013, 10:01 PM

[attachmentid=3403610]

my ride...

1year n 2 months old jor....
wan 2 find some more hellaflush kaki for exo mber.....any1?

This post has been edited by WayneWWL: Apr 21 2013, 10:06 PM


Attached thumbnail(s)

wow, claim jek warranty, mintak seat baru terus huahauha


interested to join, but have to skip for any automotive activities due to too many commitment (family, freelance, job, etc...) unless exo geng wanna have TT session around seri kembangan/putrajaya, then i can join

This post has been edited by calmshot: Apr 21 2013, 11:10 PM

currently on 3.5k ODO
L/100 is 10.8

digital metre shows 600km coz usually i pump up to RM75-80.

if correct, one full tank 55 litres will cost about RM104.50 (55 litres x rm1.90 RON95)

i forgot, the red fuel light will blink at how many percent? 5 or 10%?

i regular driver, alternating between my old car with exora.
speeding, rare unless got chased by rude driver.
mostly at 80 - 100km, AES is a menace nowadays.

so 10.8, i guess...is still high for me haha.

==============

KFH offered 2.55%

This post has been edited by dreamKrusher: Apr 22 2013, 02:38 AM