For Setup 2, it have 3 Lan Connection to Setup 1, 5 & 8. So, any changes to the above model that you have suggested earlier?

For Autogate and Alarm, do I have to call electrician to do the connection?

If I want to split the telephone line in Setup 8, do I have to use another model?

Yes, split the telephone cable to printer fax and telephone.

Ok, how to deal?

Hello there, you can check TrickleStar Surge Protector, high fireproof surge protection in Malaysia, with highest insurance RM150K for you connected devices.

Hi TS, can recommend me which model is suitable for 1 unit router including ADSL protection? I was told somewhere there's a model which I can replace myself the component when the product got struck by lightning(?).

I've read about cal-lab from your thread a few times but did not go through each of the post. Thinking to try cal-lab.

I need to check with u a few things...:
- if I connect my pc to Cal-Lab, will it 100% successful protect the PC?
- if no... is there any damage coverage to my pc?
- Is there any type of cal-lab for unifi setup (for landed house)

What is the different for below model ? Outlook same ?
1. SF 9512AR-D (Analog + C-ID)
2. SF 9512-DSL (High-speed)

- will it consider full protection if  I connect a normaly extension to SC0039 since there wifi router, phone dect & unifi fiber modem (I believe SC0039 only for one device)
- FYI, my UNIFI connected only use Fiber since landed not like some high rise using half fiber and half copper.

yeah... RG,DECT,BTU,STB are side by side... so one SC0039 should be enuf?

fully protect by cal-lab?
wall plug --> MDSC0039 --> extansion plug --> unifi devices (all device side by side)

ok nice....
how about the fiber connected to STB? doesn't need to be protect? since normal stimix need to connect to a cal-lab...

afraid the fiber struck by lightnigh...

sorry for my noobish n lots of question...

OK... I think... I will go as suggested MDSC0039... for my unifi devices...

For my room... I have a wall plug.... currently connect to TV, HyppTV Box, PC (connected via extension plug since quite far from the wall plug) through an extension plug.

basically:

wall plug --> extension plug --> tv, hypp tv box, extension plug ---> PC

so can suggested which cal-lab device for this settings?

nope... the unifi devices in dining area... only the HyppTV Box (STB) is in my room since connected to my TV

my room:
wall plug --> extension plug --> tv, hypp tv box(STB), extension plug ---> PC

my dining with other unifi devices solve with MDSC0039 + extension plug

STB and RG got one 40m lan cable connected and no other cable connected to PC from RG... since all wireless

so my dining room which have unifi device = MDSC0039 + SLAN1236
my room which have tv, STB & PC = MDSC0039 + SLAN1236 as well? does MDSC0039 enuf for TV,STB & PC?

ok bro.... agreed with the suggested number of device and add another MDSC0039 for my bro room since its for a pc only (so total 3 units of MDSC0039).

can give me the price and your account number inclusive postage to KL?
If no postage... I can meet u up at KL Convention Center for weekdays / any KL area for weekend.

btw i'm interested with the household automation - Automatic night-ON switch. how does it work and where I need to put at my light?

Can i use SF9512DSL for faxing & CLIP ? actually it's same thing and naming different only ?

But the RJ-11 connector is same inside also same, right ?

was introduced to your products by a friend recently. Recently many of my electrical equipment have been getting fried and very frequently. Last night was the worse as the lightning storm in my area & flash flood. It took out my TV or Satellite box (HDMI down still need to trouble shoot what the fried component), computer network card, NAS power adaptor, phone line also down.

In the past 12 months, 2 adsl modems and 2 satellite box =.=''''

Whats best for my current set up.

Point A powers:
-adsl modem (subscribed to Streamyx)
-wireless router
-8 port switch (because previous hit took out the router ports, only 2 left and getting a switch was a cheap & quick solution)
-NAS (network attached storage)
-Laser printer

Point B powers
-Desktop computer (network via LAN cable)
-monitor
-speakers

Point C powers
-TV
-HiFi
-Satellite Boxes (one box is connected via LAN to router)
-Blu-Ray player

Point D powers
-Desktop PC (network via WiFi)
-speakers

Point E powers
-Cordless phone

Hopefully you can give me some suggestions on what I can use to reduce my equipment mortality rate >_<' I need to go kill Diablo and save the world !!!!

Tx for the fast response  

Ok.. Hmm.. Im planning to rearrange my room also. Not so space effective at the moment... So merging points A & B should not be an issue.

Why is there a need to duplicate SLAN1236? Between point A&B + C? or is that an error?

1x SF9812DSL (79) 79
1x MDSC0039FC (63) 63
1x MDSC0039 (53) 53
2x SLAN1236 (39) 78
1x SF9812ARD (79) 79

So estimated around RM 352?

Im actually located in East Malaysia. While courier is usually arrives in 24 hours. Im also interested in some spares...  and any warranty ?