i would like to see lightning not able to harm ur equipments with cal-lab...


erm... means all of the equipments power source come from the same wall power socket?
i would recommended for IT pack or MDSC0039 + SP9201DSL if ur total power consumption still below 2000w...


u welcome...
cal-lab wont increase ur broadband...
but at least it wont decrease ur broadband speed, just affect very little...

yes, all come from 1 source,total is below 2000W.


izzit IT-Pack is below?
SF9512DSL-MS2 (RM93) + SL-MS2+3 (RM69) -> RRP:RM123, 15%off, Now:RM105 (Compatible with ADSL2 connection)

how many 3-pin port? i need to plug 2 extension wire to all my equitment, so if IT-Pack have >=2x3pin port, telephone port, then i will buy it, so pls PM me ur maybank acc, total cost to johor and etc.

u welcome...
cal-lab wont increase ur broadband...
but at least it wont decrease ur broadband speed, just affect very little...

[/quote]

Haha Juz kidding.

Anyway my speed juz like before. No problem to reach 100kb/s DL bt.

And allow me to sleep well last night ^^

it have 4*3pin and 3*2pin power socket...
FYI, IT pack only protect for modem, not use to protect normal telephone...

Damn it - only discovered this product after a few of my modems got fried. The usual products didn't do their jobs well, or they did it once and died anyway.

Too many lightning strikes lately - that's what you get for staying on a hill.

Gan, I bought a China-made multi-socket extension with a built-in lightning surge protector that operates by "breaking the circuit" when excess voltage is detected. When the circuit is broken, no electricity flows through. There's a red button which you supposedly just need press to get it working normally. Here's a photo:


Do you think this works well?

Plus, I definitely need a device to protect the phone line to my modem too, so I'll definitely be buying some stuff from you.

Thanks for your thoughts!

yes, i just connect to ADSL modem, pm me the price, postage fee to johor , ur acc detail, thanks.

what is ur complete equipment tends to protect?
if just a PC set and a router only... no PC to PC networking... SF9812DSL/SF9512DSL will sufficient...


Pm-ed u

PAID, pls check ur pm.

---

Added on April 16, 2008, 8:11 pmhi, i dont know how to connect my IT pack to ADSL modem,

which port is telephone line input, ADSL output?

beside the module, got 2 hole is for what?? why no label??

izzit IT pack come with micro filter?

---

Added on April 16, 2008, 8:31 pmi saw at the IT-Pack,

at telephone/dsl section, it label SP9201-DAF, label 1=no hole
label 2=RJ-11 HOLE, LABEL 3=RJ-11 HOLE,

but no label in or out...


beside got 2 small hole, for what??

This post has been edited by hi--520: Apr 16 2008, 08:31 PM

Label 2 for "From telekom" and Label 3 for "To modem"

IT pack doesnt come with ADSL splitter filter... which means it cant protect analog telephone and broadband connection may drop frequently... so plug the IT pack after ADSL splitter filter...

Telekom -> ADSL Spiltter Filter -> IT pack -> Modem

The 2 holes beside the IT pack are used for grounding purpose for ur equipment if necessary if u having equipment's grounding problem...

Telekom-> [ADSL spiltter in from telekom---ADSL spiltter out to modem] ->Label 2 for "From telekom" -> Label 3 for "To modem"-> ADSL modem


right?

This post has been edited by hi--520: Apr 16 2008, 09:44 PM

correct...
just dont use IT pack to protect telephone, it may affect broadband connection...

SP9201DAF (Broadband LI + DSL micro-Filter-Splitter)

actually i'm not understand, this SP9201DAF in my IT-pack ,what is the meaning of DSL micro-Filter-Splitter??

and i refer to user manual in the IT-pack,
referred to the diagram,
it show label 1(from telco)
label 2 (dail-up modem)
label 3(DSL modem router)


why u said Label 2 for "From telekom" and Label 3 for "To modem" ??


why beside got 2 hole, and u said it may connected to ground, why need 2 hole to ground??




my modem just kena lighting last week, i need to comfirm correct configuration to prevent lighting...

dont be confuse... it just a casing from SP9201DAF to integrate with IT pack...
check the sticker on ur units, it mentioned it was IT pack, not SP9201DAF
just follow my installation instruction will do...

This post has been edited by gkl83: Apr 16 2008, 11:49 PM

oh i see... that mean the user manual provided is not used...


i want to buy another product from u,
SC0039/MDSC0039 , izzit 1 port protector that can be connect to other extension wire?

what stand-alone module can be use to protect telephone and highspeed ADSL modem, and what model of this kind of configuration is come with micro-filter?

i need it for my home use.

the user guide just for reference, if u wanna to look on manual guide... u can look for SF9512DSL installation guide, it same with IT pack...
u can plug multisocket onto MDSC0039... SP9201DAF come with micro filter...
if u wanted to protect telephone, modem and PC, the combination are MDSC0039 + SP9201DAF

This post has been edited by gkl83: Apr 17 2008, 09:27 PM

hi,
i am really fed up with my modems. got fried by lightning 3 times this year only not even in 5 months! Last month lightning struck my telephone pole outside my house, my modem, switch, mobo, cs-box, home plug got fried and i spent more than 1.5k to get it replaced n getting surge protector as well. then just yesterday only, i saw the lightning struck the telephone pole again in front of my eyes. i tot my belkin surgemaster gold series can hold the lightning, who knows.. my modem fried again which newly bought last month. however, the belkin is still function well without any problem. surprise that i spent almost rm200 for nothing.

Cal-lab wont fried? i mean after lightning struck, does it still function?

Cal-Lab will fry if lightning surge over its limitation, but ur PC equipments confirm will be in safe condition with proper installation and used correct models. Cal-lab will choose to "kill" itself rather than "kill" ur equipments if it detected not able to isolate surge 100%...

so far i sell cal-lab at LYN around 2 years and deal with 100+ users, none of them complains that cal-lab fail to protect for the users who followed my recommendation models and installation... only have 2 of my users complaint to me, 1 is insist dont want to follow my recommendation, another is wrong installation caused back surge (after investigated by Cal-Lab staffs)...

and the replacement cost for cal-lab is worth for ur money...
maximum u just pay another RM25 to swap another working units with cal-lab office on the spot and for life time...
means that RM25 can save ur RM1500...

I also have happy user that his modem still working (but cal-lab dead) after the day with thunderstorm around klang valley, he just pay RM10 to replace a small module only and RM10 saved his modem or even his PC equipments...
http://forum.lowyat.net/index.php?showtopi...post&p=16521749

This post has been edited by gkl83: Apr 30 2008, 10:47 PM

if i order the IT pack, how much is the shipping cost to east malaysia (kuching, sarawak)

for me i will recommend u to get SF9812DSL instead which ease to deliver damaged small module (SKPXDSL) to Johor for repairing jobs and cost u RM10, also u need to bear the delivery cost to send it... of course must be as low as possible and a small module wont cost u much... But IT pack kinda big and heavy and u have the bear the delivery cost more than a small module... unless u means ur PC power consumption are very high and used few set of PC from cal lab units...

Also, IT pack and SF9812DSL only used on 1set of PC with modem and no PC to PC networking involved...

i want to protect 1 set of desktop(cpu tower,monitor,keyboard & mouse), it is networked cable for internet.. but the router isnt mine.. (so no need protect router) which surge protector you recommend? pls pm me