Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
25 Pages < 1 2 3 4 > » Bottom

Outline · [ Standard ] · Linear+

 Tp LInk TL-MR3420 Owner CLub V2.5, need a pro here

views
     
chuahcs79
post Feb 7 2013, 09:50 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(aliex87 @ Feb 7 2013, 08:34 PM)
so far my openwrt v1 had been up for more than 20 days non stop, and still very2 stable.....using it with e367, no fan at all and temp is very2 good.....this is the longest up time ive ever achieved..... thumbup.gif  thumbup.gif
*
only openwrt able to do so, the stock firmware wise u DC for around 7~10 times at least in 20 days sweat.gif

to keep your router fresh, minimum reboot once /week,..

there is command to set in scedule task to do so,.

This post has been edited by chuahcs79: Feb 7 2013, 09:52 PM
chuahcs79
post Feb 7 2013, 10:41 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(dodobird23 @ Feb 7 2013, 10:14 PM)
i dc more than ten times a day with stock firmware....
*
that's one of the main reason u need openwrt icon_rolleyes.gif
chuahcs79
post Feb 7 2013, 11:25 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(rootlinux @ Feb 7 2013, 11:24 PM)
Below is my output: -

root@OpenWrt:~# cat /sys/bus/usb/devices/1-1/version
2.00
root@OpenWrt:~# cat /sys/bus/usb/devices/1-1/product
DT 101 G2
root@OpenWrt:~# cat /sys/bus/usb/devices/1-1/speed
480
root@OpenWrt:~# cat /sys/bus/usb/devices/1-1/manufacturer
Kingston
*
guess after all the usb reading from USB2.0 speed is totally fine hmm.gif
chuahcs79
post Feb 8 2013, 04:32 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(khairilyazit @ Feb 8 2013, 11:24 AM)
See, ur kernel log states new high-speed USB device.. High-Speed USB = USB 2.0 = 480Mbps..
Ur running a Kingston DT 101 G2 USB Drive on that particular usb port.. using extroot to entend ur root_fs i presume?

______________________________________________________________________________________________

with most users reporting a 480 bus speed, we can only assume that it its our modems that are signalling to the router that it is running at 12Mbps.. now we only need to figure why it happen and how to overcome it..
*
many user reporting this issue when using with router , speed become slower,. hmm.gif
chuahcs79
post Feb 8 2013, 04:42 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(blacktubi @ Feb 8 2013, 04:36 PM)
Wait, I do able to get my usual lightning speed with my Umobile with MR3420 openwrt
*
finger cross on that, hope your u mobile speed didnt reduce with openwrt laugh.gif
chuahcs79
post Feb 8 2013, 04:59 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(blacktubi @ Feb 8 2013, 04:52 PM)
Last time long long time ago when on the 10.03.1 it is full speed smile.gif

Now Umobile expired can't test
*
hmm since ur u mobile expired liao, then i guess there is no way to test,.

hmm.gif
chuahcs79
post Feb 8 2013, 08:38 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(hairul @ Feb 8 2013, 08:29 PM)
Does OpenWrt have this Driver? Or this is driver that we need?

"ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver "
*
u able to find it in the list ? hmm.gif
chuahcs79
post Feb 8 2013, 10:53 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(khairilyazit @ Feb 8 2013, 10:31 PM)
yes it does have the driver, and yes we do use the driver...
it's from the kmod-usb2 package..
*
but it never show in system log though ? hmm.gif
chuahcs79
post Feb 9 2013, 02:03 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(texas5 @ Feb 9 2013, 01:32 PM)
hi,

can someone share the bin file for huawei E367? my MR3420 did not recognize it?

thanks.
*
just make sure u upgrade your MR3420 V1 or V2 to latest TPLink stock firmware,

it will auto recognize it after notworthy.gif
chuahcs79
post Feb 9 2013, 02:12 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(Wahroonga Farm @ Feb 9 2013, 07:28 AM)
Hi guys n gals from sunny Australia.

Just stumbled across all your hard work with the MR3420 V1 and V2.

There are a small band of TPLINK fans down under, however we have met a major stumbling block with the so called 3G/4G versions of the TPLINK MR series.

The problem is that the TPLINK drivers for the fast 4G modems do not work at the speed of the modem (100Mbs or higher).

The V2 limits the available network 4G speed dramatically.

Rather than a lot of words; if you are interested, read our V2 thread, which focus's on the speed problem.

http://forums.whirlpool.net.au/forum-replies.cfm?t=2043588

We have developed an Open WRT solution for our 4G modems. One that works at full speed on the MR series.

Best place to start is the WIKI.

http://whirlpool.net.au/wiki/router_openwrt

In addition this version of Open WRT supports a windows based 'Modem GUI'. This wonderful 'add on' reports and controls lots of interesting modem information real time.

user posted image

Developments are ongoing.

Please feel free to join our development thread here:

http://forums.whirlpool.net.au/forum-repli...6176&p=68#r1356
*
Amazing work credit detail , thanks for share notworthy.gif
chuahcs79
post Feb 10 2013, 05:31 AM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(texas5 @ Feb 10 2013, 04:31 AM)
my MR3420 V2 frequently DC..already upgrade to latest firmware..is it my E367 problem? try to flash to openwrt and sucssesful..but have no idea how to connect to 3G.. sweat.gif  does it auto connect or we need to manually setting the openwrt?
*
on your V2 original TPLINK stock firmware,

under the 3G/4G in network setting, IDLE timeout: 0 <-- need to set zero

so it wont DC

if u did V2 openwrt : just follow below to setup

- login 192.168.1.1 ( you will see LuCI Gui interface )
- click login
- go to System
- go to Administration
- key in your new password ( For web Gui )
- re key in your same password again
- click save and apply
- go to Network
- click Edit on Wan ( 3G wan )
- select UMTS/GPRS/ED-VO protocol
- click switch protocol
- Modem device ( ZTE modem = /dev/ttyUSB1 , Huawei modem = /dev/ttyUSB0 <- last is zero )
- service type : select UMTS only or UMTS/GPRS
- Key in your ISP APN , ( Unet, Maxisbb, bbnet, celcom3g, u3g, my3g and so on )
- Go to ADvance setting
- Modem init time out: 5 ( key in )
- Use gateway Metric : 0
- Tick the box of : if uncheck, No default route is configure
- Use custom DNS server : 8.8.8.8 click the icon at the end
- second roll: 8.8.4.4
- LCP echo failed Threshold : 0
- LCP echo interval : 5
- Inactivity timeout: 0
- select Wifi
- click Edit
- select your wifi prefer channel 1~11
- enter your wifi name in ESSID
- go to Wireless security
- encryption : WPA2-PSK
- key : wifi password
- click save and apply
- then click enable to on your wifi ( if u need it )
- now go to System
- Reboot
- click Performs reboot
- plug in your Usb modem after
- wait for reboot finish and enjoy
chuahcs79
post Feb 10 2013, 04:46 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(texas5 @ Feb 10 2013, 10:14 AM)
thanks mr. chuah for the reply..
on my V2, i need to select "connect manually" or "connect on demand" in order to be able to set the idle timeout..if i select connect automatically, this idle timeout function cannot be key in..

and my MR3420 seem difficult to identify my E367..sometimes it identify successfully, sometimes it will keep to identifying... and sometimes it show "unknown modem model..."
*
set to connect manually first -> then set IDLE timeout = zero /0 -> then set back to connect automatically notworthy.gif
chuahcs79
post Feb 10 2013, 10:14 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(xplayxtreme @ Feb 10 2013, 09:59 PM)
finally can..need to wait awhile for the uptime to be shown..its a bit faster than stock firmware..thanks!
*
if u put 5 second in setting, then dialing will be done in 5 second ,..
chuahcs79
post Feb 13 2013, 09:01 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(dodobird23 @ Feb 12 2013, 03:44 PM)
support tp-link mr3420v2?
*
if u see the post above yours, u will see it is written V1 and V2 notworthy.gif
chuahcs79
post Feb 16 2013, 09:50 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(texas5 @ Feb 16 2013, 09:25 PM)
Can huawei e355 be pair with this mr3420?
*
huawei E355 is a wireless router it self,

so the answer is no,. notworthy.gif
chuahcs79
post Feb 19 2013, 02:25 AM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(Ji3MOON @ Feb 19 2013, 12:21 AM)
hye there..i just get a umobile broadband 5GB data plan n today bought this TL -MR3420 to make a wifi hotspot..i also just upgrade to the latest software v2 for my router but i notice sometimes it show limited coverage to my lappy and i need to restart the router =,= what is the problem ya..sorry for asking newbie here.. and any tips to make my connection fast coz i got abit lagging when do video calling =/
*
is it your lappy show Limited Access instead of limited coverages ? hmm.gif
chuahcs79
post Feb 19 2013, 04:07 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(Ji3MOON @ Feb 19 2013, 07:06 AM)
ya its Limited Access..sorry wrong type =,= why ya?
*
u might want to dianogse your wireless or Local area connection under your network in your window,.

notworthy.gif
chuahcs79
post Feb 21 2013, 04:02 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(Wahroonga Farm @ Feb 21 2013, 05:47 AM)
There is a new firmware release for our V1 OpenWRT image.

20/2/13 - A modem data page for capture of modem information. Include QoS package. Additional modems support. Fixed Custom DNS server order. Added the Script Version number to the Modem Connection page to identify the version. Include the 'relayed package' to support Client & Repeater mode.

Modem Gui is the icing on the cake with our version.

Details HERE.
*
the QoS pakcages is a thrill rclxms.gif
chuahcs79
post Feb 21 2013, 05:52 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(garytey @ Feb 21 2013, 05:35 PM)
anyone share the bin file again? the link from box has ran out of bandwidth.

btw, does this openwrt support e398?
*
here -> http://www.mediafire.com/?gr9p7d6ydrrk79u
chuahcs79
post Feb 22 2013, 04:08 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(garytey @ Feb 22 2013, 09:06 AM)
thanks..it works, i've managed to establish internet with e398, however, i'm connecting through WAN interface instead of 3g interface, is this correct.

and my device behind this router cannot ping like google.com and the rest.. firewall setting issue?
*
either wan or 3G interface is fine,.


« Next Oldest · Networks and Broadband · Next Newest »
 

25 Pages < 1 2 3 4 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0504sec    0.69    7 queries    GZIP Disabled
Time is now: 12th December 2025 - 01:10 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.