if u flash to openwrt barrier breaker, then no need to set, it is auto, as long as u set keep the connection alive with restart.//

the best section is the modem section showing all your connection status detail,..

can always try,.. if cannot support just simply flashed it back,.

mr3420 V1 and V2 both is hot again with this openwrt barrier breaker,..

max4g

try to download zte mf190 modem bin file from tplink websites and put it in your V2 webinterfaces under 3G/4G

if u flash to mr3420 V1 openwrt barrier breaker, it should be able to dial,..

so after u plug in 3420, it never able to connect ? stuck @ connecting ?

what is your V2 firmware version ? it is the latest ?

if yours is not, try to update your V2 firmware to latest

your zte mf190 seem is unlock right ?

what is your zte mf190 firmware version ?



if u want, you can try to flash to openwrt barrier breaker for your mr3420 V2

firmware is at -> http://www.rfactory.org/OpenWRT/index.html

download it @ Experimental BlackWidow Firmware section,.. for your V2,..



This post has been edited by chuahcs79: Apr 11 2013, 09:13 PM

it should be working as auto recognize and dial your modem,..

just set up the wifi, set apn, choose to keep the connection alive with reboot and plug in your zte mf190,.. reboot

then it will do the job

This post has been edited by chuahcs79: Apr 11 2013, 09:25 PM

experiemental is the latest,.. it works fine for me,.. u should try,..

make sure u download the latest tplink V2 stock firmware first before u proceed,.

yes you can revert back,..

remember to set the web interface password under adminstrator, and tweak your wifi with Mac address filter and DNS forwarding,.

it should start and dial your zte mf190 in a few second the most,.. superb,.

remember to set keep the connection alive under modem section,..

enjoy

u flashing the openwrt barrier breaker or ?

restart your router again, it should be auto detect and connect all time

what usb modem u are using ?

both of those model should be auto detect and auto dial connection,..

which openwrt bb u download ?

it is under the warning experimental or above ?

so far i dont see the connect button, because the dairyman from canada original programmer create the modem section, so it is in auto,..

or u can manually create a 3G connection in network interface section and manually connect ,..

for that, i think u need to reboot your router,.

or u can flash back to older openwrt altittude adjustment and there is option to connect manually,..

This post has been edited by chuahcs79: Apr 12 2013, 12:15 AM

it is here -> http://www.rfactory.org/OpenWRT/index.html

download those experimental under the red warning word,.. ( is the latest one )

for anyone who using TL-MR11U V1 or V2,.. if u want to flash to english firmware web interfaces of TL-MR3040 ,..

u can use the modify header software ,..

i can let you know the detail and step,..

This post has been edited by chuahcs79: Apr 12 2013, 02:03 AM