Mesh WiFi.

Go to Advance Setting (panel) > System Log > General Log

Quoting again:
[attachmentid=10265665]

Router. For your public ip, you can see at the logs.

You can look at the logs if there is any changes in your WAN IP.

What do you mean by "behaving strangely"?

have you updated to latest firmware ?

after updated to latest firmware, need to do factory reset.
If after factory reset , problem still remain, then call ASUS help centre...or maybe can tag @ASUSMY here.

write down your ID and password ; SSID , etc
the rest shall be select UniFi preset will do.
OR back-up and restore back after factory reset; suggest write down ID and password (very important).

Hi guys,

Is this temperature below OK for ASUS router..

Legend: 2.4 GHz - 5 GHz - CPU
Current Temperatures: 49 °C - 55 °C - 78 °C

You can only see those when you're using a third party firmware like ASUSWRT-Merlin.

Don't worry too much about the temps as it is self-regulating.

Hi nitehawk,

You may manually change the AiMesh Node IP using the IP binding feature in the client list.

Check the AiMesh Node current IP address and go to the client list and search for the same IP address. Click the IP address and change the IP address that you want and then click Apply.

You may need to restart the node if the IP address didn't change after you apply the setting.

Thank you

You cannot configure the ONU because it was locked. Its the problem of your Asus router. Please upgrade to a higher end Asus router, at least RT-AC68U. Beside that, please try to avoid 2.4GHz wireless connection. If you found that your neighborhood are using a powerful router, their wifi connection may interfering your home wifi connection. That's why you may found only 20mbps on wifi speed. Better is upgrade to RT-AC86U and use the smart connect rule. Turn the 2.4GHz and 5GHz into one SSID only.

Hi nitehawk,

Maybe it is because you are using the same name and 5GHz are providing you are better signal strength.

If you using different SSID name for 2.4GHz and 5GHz, you can just turn off of the node to see the main router 2.4GHz is ok or not.

Thank you