Extended period or overused mileage means more den 10k for FS right?

this 1?

PUSAT PERKHIDMATAN SATRIA SDN BHD (AUTHORIZED SERVICE CENTRE)
NO 7, JALAN 51A/227, 46100 PETALING JAYA, SELANGOR
( 03-78767572) www.buyprotoncars.co

Full synthetic oil is better for new car indeed. 10k service .

suitable for richfags.

Following the Proton's schedule as my car is still new. 5k service interval. So using Semi more worth it

The respraying shop just called me to say that my car is ready for collection. It has only been 3 days since I gave them the car.

Full car respray ??? Scared not fully dry,

Full exterior. Boon Fun auto, oven painting .

Time to buy few Micro Fiber Towel to clean ur car, Take care of it, ur paint will last longer. Better wash ur car urself, with 2 bucket system.

I'm always washing the car by myself . I use a washing mitt + dry the car with a water magnet, brand Quik-dry. Probably not as fancy as Meguiar's water magnet towel but it does the job.

change headlamp or change bulb

Yup. 10K for FS.

just done my tinted, RM650 damaged.

Air Gard SF70

VLT = 50%
UV = 99%
IRR = 80%

Is it worth it? T_T

yalor i thought so..

initially quote for Caltex FS was 260+..i already wondering, labor so cheap..but of coz i diam2 la

yupe this is the 1

holy sh1t..despo solution

Disclaimer: I'm not saying that any oil would cause damage to your engine, but the following are just for the paranoids. Please take with a pinch of salt, in fact many people survive driving their car with Minyak Buruh or 20W-50 oil.

Cold viscosity may seem unimportant for Malaysian weather but technically, the sooner the engine oil can reach optimum viscosity, the better it is. General rule of thumb is to maintain engine oil at 10 cSt.

Even at 40C, you can see that 0W engine oil is still far too damn thick for optimum protection, so please don't think cold viscosity is not important for our weather.

This is the tech sheet for Syntium 5000 SM 0W-30
Kinematic Viscosity, cSt
@ 40 °C 51.0
@ 100 °C 9.6

This is the tech sheet for Syntium 5000 SM 0W-40
Kinematic Viscosity, cSt
@ 40 °C 71.4
@ 100 °C 12.9

This is the tech sheet for Mach 5 SM 15W-40
Kinematic Viscosity, cSt
@ 40 °C 108.2
@ 100 °C 14.1
This cold viscosity will appear as honey-like liquid even at our room temperature. Can take more than half a minute to recirculate a cold engine.

Even the best oil, has poor cold start protection, hence the saying "there is no oil too thin to buy with money".

Rule of thumb to determine what hot viscosity to choose,
1. Maintain 10cSt at the highest temperature you operate your engine at (engine oil temperature) and compare with tech sheet. If you're not pushing to the limits, your engine oil temperature stays within 100C, hence usually EO companies gives you 40C and 100C viscosity for your convenience
2. If you are racing, oil temperature may reach up to 120C, in this case, some times your daily usage oil may be thinner than 10cSt. Slightly thinner is fine, as long as engine oil temperature can stay within your engine's specifications, rule of thumb is 60PSI. i.e. your engine oil thins up to 8cSt (for example) but there's still enough oil pressure, go ahead. Although with lesser pressure, the flow will be greater. Priority is flow, dependency is pressure.

If you have equipment to measure your operating EO temp and pressure, you can even decide that 0W-30 can be safely used on Campro. There are no best oil, only the oil to suit your needs

This post has been edited by mengsuan: Dec 24 2012, 09:03 PM

. Just looked at the photos of my car. Definitely resprayed, but they didn't spray the side mirrors and the door handles to the body color . I do recall asking for them to be painted the body color as well.

This post has been edited by TDUEnthusiast: Dec 24 2012, 09:54 PM

Bulb leerrrr

ask them spray d handle n d sidemirror...

any acc shop also can change gua.as long u buy d bulb u wan...

Event Name:
Car Clubs Gathering @ The 19 USJ City Mall NYE Countdown to 2013

Time:
31st DEC 2012(Monday, 8pm - 12.30am)

Venue:
The 19 USJ City Mall, Subang Jaya


INVITED Car Clubs:
1) Civic Type-R Club Malaysia
2) Honda CR-Z Club Malaysia
3) Satria GTi Club Malaysia
4) Satria Neo R3 Club Malaysia
5) Satria Neo CPS (CPS Neoxers)
6) Satria Neo Club Team (SNCT)
7) Proton Inspira Owners Club (PIOC)
8) Club Saga Iswara (CSI)
9) Wira Owners Club (PWOC)
10) Waja Performance Club (WPC)
11) Prime Perdana Club (PPC)
12) The Persona Club.Com (TPCC)
13) Savvy Owners Club (SAVOC)


Special GUEST:
Competition Autoshow Cars by Team Impact Malaysia


GT Model Search:
1) Christine Pang
2) Moon
3) PuiLing
4) Jane Wong
5) Amelia
6) Chloe


Supporting Booth:
1) Proton Edar
2) Progard Car Detailing
3) Waxco
4) ASC (Ameron)


Event Itinerary:
6.00pm – 8.00pm Car Clubs Arrival
8.00pm – 9.00pm Visitors Registration
9.00pm – 10.00pm Event Starts / Speech / Autoshow Cars
10.00pm – 11.00pm GT Model Walk Show / Photo-shooting
11.00pm – 11.45pm Live Performances / Crowning of GT Queen / Countdown party
11.45pm – 12.00am Countdown / Fireworks / Flame Throwing Cars
12.00am – 12.30am New Year 2013 Celebration
12.30am – 1.00am Event Ends



We are allocating 15 exclusive parking spaces for each invited car clubs at the designated area. (PM us if your car club wish to participate)

And, a complimentary NYE meal courtesy from sponsored restaurant/café and event merchandise will be given to each car club members (T&C apply).

Besides, on-board passengers are entitled for dine-in discount vouchers as well (first come first served basis).

We sincerely hope that this gathering / countdown event will further enhance the bonding between car enthusiasts from various car clubs.



Quick Links:
Past event page from LowYat.Net

Previous event page from Facebook

Vaux RS Facebook


So, what are you waiting for??

Do not hesitate to call/sms/whatsapp us for more info.

Hope to see you there.





Regards,

Vaux RS Team

Tel: +6016- 212 4113 (Patrick Seow)
Tel: +6016- 2383837 (Goh Wei Luck)
Email: vaux.rs@gmail.com