Buffalo routers comes with a standard 2 years warranty.

look like not bad... wonder if kerbau kaput ....coz of flash.... the firmware...will allow RMA or not...

ehh.. whats the diff betweeen
dd-wrt.v24-9333_NEWD_mega.bin
and dd-wrt.v24-9333_NEWD_std.bin

which shall i load on wrt54GL

---

Added on March 25, 2008, 11:48 amok i just found out what does mega means..
wrt54gl doenst supoport it..


This post has been edited by youliang: Mar 25 2008, 11:48 AM

hi everyone, i flash my WRT54GL to tomato last night but i encounter some weird problem. After run my router for few hour, the router will hang. i unable to connect via LAN or WLAN but the LED status at front panel is normal. any clue how to settle this?

Switch it off kasik rehat for few hours then turn it on did you boost any TX Settings for GL below 60mW should be okay

Did U clear your NVRAM after flash? I suggest U do it...coz it did gave me problem b4 after flashing. After clear, no problem at all.

Yes. i had clear the NVRAM but problem still there for once. i had tune the conntrack setting. right now still under test. hopefully it can pass 12 hour test.

anyone know where to get the linksys wrt-54g ver.8? i'm trying to get this ver.8 but seem malaysia haven't launch yet? all the shop i looked into just got ver.7 i find out this ver.7 is hard to flash with dd-wrt & its tricky but the ver.8 is much more simple.

do i need to wait for the newest ver.8? or just grap the buffalo whr-g54s?

Just grab the Buffalo, IMO it performs much better than the Linksys but stock availability might run out anytime and the price will always be jacked up by the shops.

I suggest U buy linksys WRT54GL...Coz it robust build and proven to operate 24/7 non-stop without overheating issue.

Or best get this Asus WL-500G.(Some1 bulk it at RM170) It come with 1 USB port. U can mount a USB pendrive on it. There are also plenty of 3rd party firmware.
I just started using Asus WL-500G Premium...Manage to mount a pendrive.. Now will learn how to install and use download client.

This post has been edited by mikelanding: Mar 26 2008, 12:26 AM

if buffalo which model u guys suggest ?

I can vouch for this one. My WRT5GL has been running over a year on a high shelf in a non-aircon room with almost no ventilation and it is perfectly happy. It feels warm to my hand, but even after being on for months it doesn't feel as hot as those ZTE and Billion after 15 only minutes running.

i hav flash my wrt54gs v4 to dd-wrt.v24_mini_wrt54gsv4.bin

after i flash dd-wrt.v24_mini_wrt54gsv4.bin can i flash dd-wrt.v24-9344_NEWD_std.bin or dd-wrt.v24_std_generic.bin ??

and what is the different with dd-wrt.v24-9344_NEWD_std.bin and dd-wrt.v24_std_generic.bin

This post has been edited by jianwei87: Mar 26 2008, 07:48 AM

ya...this 1 not easy to overheat. Mine just beside back of refrigerator, non-aircon. U guys should know how hot it is at that area
Still...running pefertly well 24/7 for 2 years+ liao...

I'm officially DD-WRT'ed, just had a second hand WRT54GS v1.1 with 32MB memory, work flawlessly now. Did had a glitch during few hours of operation like cannot dial in PPPoE, have to reset it and it come back nicely now.

There is new firmware to solve this PPOE issue. V24 RC7 9346

wow so fast another version out already..

---

Added on March 27, 2008, 11:32 amwhats the highest speed u can transfer a file from one pc to another pc via your router using
cables?

This post has been edited by youliang: Mar 27 2008, 11:32 AM

Will test the rc7 today :-)

This post has been edited by MX510: Mar 28 2008, 10:03 AM

I have a dlink dir300 and wanted to flash it to dd-wrt v24 rc5. I've followed the instruction to flash it via tftp and telnet method but im stuck at trying to connect to the redboot. One more thing is there any guide how to properly setup tftp, im using pumpKIN. Cant i just flash it using the web interphase? please i need help.

Good... RC7 work best for me so far. I am not able to run repeater mode on RC6.2 but solved it with RC7