Yeah my kerbau with Mimo having this problem azmi help to install the fan but the problem still persist today. I switch it off the whole day today. Will try power it up tommorow however the LAN is working in perfect conditions. I think it's overheated. I will lower down the 62mW settings to normal settings afterwards. This is second time this is happening. so sad n sedih lah

This post has been edited by MX510: Mar 22 2008, 09:17 PM

Actually since WRT54GL is actually a WRT54G v4, the WRT54G routers all have problems with their wireless. I had a WRT54G v3.1 last time and wireless connectivity was very very bad.

i'm from Bukit Mertajam (Penang). I set all setting to default and also try flash with latest firmware also face the same problem. i just plug 3 x LAN cable to the router and no extra cosmatic or firmware changes. One changes is i disable the security feature for the router. for past 6 months it work like charm, no complain for it. after i change the power adaptor then something like this happen. (i change the adaptor because the adaptor already malfunction).
Very thank you.

---

Added on March 23, 2008, 12:51 amis that i face the same problem too? Last time i set to 128mW and now i set back to 28mW. actually it like happen once awhile for new firmware. if i use old firmware (V23 SP2) then gonna be once a day.

This post has been edited by davidsk2002: Mar 23 2008, 12:51 AM

I'm using dd-wrt Firmware: DD-WRT v24 RC-5 will set back to 28mW tommorow luckily azmi agree to borrow me his kerbau. If that wireless devices chip is damaged i have to send for RMA

will they RMA if using 3rd party firmware? is that possible firmware problem?

Have to revert back to original firmware if not kantoi lah you modified the hardware

still failed

Actually it depends, I did RMA my WRT54G last time when it was flashed with DD-WRT but they still accept.

ok..guys..
any solution here?
well, im connected to a public wifi using wrt54gl ddwrt v24 running in repeater mode..
is there anyway i can encrypt the wifi from my router to the public wifi?the public wifi is runing in unsecured mode. VPN perhaps?

Finally i power up the router in the office today. Working perfectly due to overheated problem.

DD-WRT
Router Model
Buffalo WHR-HP-G54
Firmware Version
DD-WRT v24 RC-5 (11/22/07) std - build 8422

I change the 62mW to 28mW will see how long it will last long. The last problem was due overheat, I also set power down wireless on non peak hours 4 am to 7 am to make sure it rest a bit. It also will auto reboot every 12 a.m daily.

If problem persist i have to flashed into different firmware maybe this version is not stable.

It could be because of unstable release of dd-wrt you installed. Did you try to install the stable version of dd-wrt v23sp2 on it? Does it show the same result?

http://www.dd-wrt.com/wiki/index.php/WHR-HP-G54

Will try older firmware later :-) maybe that could be the problem

guys can use tis kerbau WHR-HP-G54-AP ? u guys need any unit or not?

so you do suspect is firmware problem? right now my router still under testing but it have reboot by itself automatically yesterday. If the problem still there, i will flash to tomato firmware and test again. Latest DD-WRT firmware also give me the same problem.

I just bought this model last night and flashed it to Tomato. I am currently stress testing it with torrent and it just passed the 12 hours uptime. What do you mean whether any of us needs any unit ? You are helping to buy ?

i can it at rm170 not sure expensive or not....

RM170 is a good buy for that router. Get it before it is sold out ! I've been told that there aren't any stocks left from the supplier so once the stocks at shops are out then the wait time for the new stocks might be long.

and different with this

dd-wrt.v24-9333_NEWD_std

dd-wrt.v24 RC-6 (01/02/08) min

Still having the same problem suspected the firmware is having problem will flash back to sp2 final tommorow i get another loan unit from Azmi Hamzah, hehehe thanx bro for WHR-G54-S if problem still persist i have to use the loan unit maybe the chip itself dah damaged.

I think i have to disable the amplifier built in inside the MIMO

This post has been edited by MX510: Mar 24 2008, 06:32 PM

eh kerbau how long warranty ? 3 year ? Linksys 3 years rite?