rebranding E372 can tweat too?

Can i tweak my icon505m too? Hehe

Flash to the latest firmware then use the signal tweak.

You will see a huge increase in speed.

---

Added on October 8, 2012, 1:49 pmThanks for the support situ chuah
Learnt many from you

Just run the software
Huawei software is very simple

Huge beza

If you worry about warranty better don't play with this
What is your original firmware, I may able to get a backup copy for you

Hi bro, I suggest you to uninstall the old driver and everything first
Failed to connect because you haven't setup a APN
And I suggest you use RAS

This post has been edited by blacktubi: Oct 8 2012, 01:49 PM

its not connect failed bro..
is cant click the connect button

and how to remove drivers....
is it from device manager, right click zte network thing n uninstall drivre software?

can icon 505m use this trick/

If you are using pure Umobile modem, you won't need this tweak

Uninstall every dashboard you have

Umobile connect manager
Connect Manage

Then go to the settings > Add APN > RAS

---

Added on October 8, 2012, 4:05 pmI not sure with what chipset is icon 505M is using

Yellow light for this, you may try, if QPST detect it, it should be able to use

This post has been edited by blacktubi: Oct 8 2012, 04:05 PM

ok i try 1st. TQ

The Option iCON 505 is an USB based wireless boardband module that is designed for use on a UMTS/GSM networks. At the core of the dual-band HSPA and quad-band GPRS/EDGE modem is a design from Icera based on their Livanto chipset, which includes the ICE8040 baseband processor, ICE8215 RF transceiver and ICE8145 power management chip...

source -> here

so E372 only need install the dashboard and firmwave to latest version only.

Only ZTE MF680 require to do such following tweak
Qualcomm QPST
Qualcomm QXDM

difference between RAS and NDIS?

NDIS should better than RAS and it didn't create a new interface on the control panel.

But that legendary dashboard don't works well with NDIS

so.. for a mf680 will be using..

If you MF680 can Purple w/o issue, it is not required to mod dashboard.
Just use RAS.

does this mean that mf680 best using ras rather than connect with dashboard?

Very personal question

Test it yourself, I use mdma = RAS.

after all MDMA still a better dashboard other than can't read text message

whats the default value of tx already ah.. want test be4 and after later when i got chance

24dBm

better you "first page it"

mine both E372 and ZTE MF680 default value is TX 23