the issue is i am not sure which value fit me though,. hmm just dont want to over tweak,

Seems like after I tweak the TX, my speed dropped by half

Increasing TX power got nothing to do with speed drop
Try restart a few times if fail then revert

This post has been edited by blacktubi: Oct 7 2012, 11:17 PM

what value u tweak ?

Same value in the screenshot, 26. After I reset to 23, the speed come back up

My E372 and ZTE MF680 both original TX value = 23, i tweak both to TX 26 now,.

testing to see whether any different

May I know what modem are you using
It increase the speed on all my modem

i think my ZTE MF680 much more happy with this tweak than my E372,..

i guess ZTE MF680 is a power hunger like Option Icon,..

after tweak E372 effect is so so similar like before,

but for ZTE MF680, consistency is really there, very stable compare to before up down ding dong for sure

thanks for sharing Blacktubi

I am using MF680 and the funny thing is after the tweak, the signal strength dropped to 54% from 64% in MR3420. Heat is not an issue because I have a panasonic stand fan blowing at number 3 24/7 and its actually very cool to touch

---

Added on October 8, 2012, 12:38 amOk, I tried it again and repositioned my router a little bit, now I am getting same speed as 26 and 23. Maybe my tower is already at max

This post has been edited by linkeong: Oct 8 2012, 12:38 AM

normally me with no star IP speed around 9~11Mbps,..

result is after tweaking with the QPST blacktubi method on no star IP
so i guess 5 star IP would be higher speed for sure

hi.. newbie here..
how do u actually "uninstall" old drivers/dashboard?

recently updated to new umobile mf680 driver and i lost dc-hspa+..
now it's constantly on hspa+ and blinking blue light on modem..

i tried uninstalling driver software from device manager and installed the 3 drivers, but the 3 connect mannager wont detect my modem and the umobile driver reinstalls itself after a few moments...

Gudjob sifu..

after tweaking TX power, current speed

I tried n my speed a bit down but the line just got stable..

my speed super stable like never before,

wow TX 26 value really amazing

especially when u download IDM u will notice huge different

Wondering is there any tutorial in upgrading the E372 firmware?

the E372 tweak to value 26 ada beza?

btw, THANKS and KUDOS to blacktubi

I googled and found out femtocell is like a small base station.

Will this be expensive?

---

Added on October 8, 2012, 9:40 amUpgrading Maxis E372 Firmware will that void the 1 year waranty?

This post has been edited by krayz_underground: Oct 8 2012, 09:40 AM

done tweaking my 1st modem (Huawei E372)
tested on IDM downloading ubuntu ISO
telco : maxis
before tweak : HSPA+ 91dBm abit rocky speed at 2.9-3.3mbps
after tweak : HSPA+ 91dBm abit more stable at 3.3-4.1mbps

cant expect much becoz on my working table the network signal is abit bad... usually i plug my TPlink 3020 router near the office window

---

Added on October 8, 2012, 10:00 amdone tweaking my 2nd modem (Huawei E353)
tested on IDM downloading ubuntu ISO
telco : umobile
before tweak : HSPA+ 99dBm abit rocky speed at 2.2-2.4mbps
after tweak : HSPA+ 99dBm flat stable at 2.81-2.89mbps and some times flat stable at 1.86-1.96mbps

cant expect much becoz on my working table the network signal is abit bad... usually i plug my TPlink 3020 router near the office window

This post has been edited by cruxidex: Oct 8 2012, 10:01 AM

any1?..

now the 3 connect manager detects the network, but i just cant click connect no matter how long i wait..

and the u broadband connect manager fails to connect (maybe becoz i deleted the drivers and installed the 3 drivers instead)



edit : i cant find the uninstall button for the u mobile connect manager either

edit2 : qxdm cant install, says i need internet explorer 6 or higher.

but i got ie8 -.-

This post has been edited by newly wed duck: Oct 8 2012, 11:53 AM