Maxis center dun sell the E372 standalone now

Dun believe ? Make a trip to your fav Maxis Center to find out then

well i dont use MDMA as i plug my ZTE MF680 into TP LINK 3G router,.. so any modem is fine as long as support by router

btw, any time i opt for E372 over MF680

well consider me stingy or anything, im getting the cheapest 42mbps modem out there ,2nd hand e372 more expensive than new mf680, so fak it i go mf680 from fruitie

--------OT---------




http://www.malaysianwireless.com/2012/09/m...im-for-iphone5/

This post has been edited by digilife: Sep 21 2012, 06:41 PM

i opt for ZTE MF680 anytime thna E372,. at least is cheaper and yet faster speed in max out your connection

Apparently, it display as B04 in Windows and B05 in Mac.

Funny

that one we upgrade is dashboard alone, firmware is not update at all , i have check well but at least signal in TL-MR3420 is much higher now and stable too

Sad, I tot E372 is hot in the market now. Anyway, I will try bring MF680 sooner .


Thanks for info. I think E372 at RM230 below will be a reasonable price.

Hello evryone, i've been a silent reader ever since i read this thread.hehe. This is my first post. I juz ordered E367 online and 2morow expected to arrive at my door step. Previosly owned an E173 and hopefully gonna see big changes:-) maxis user here.

It not only updates the dashboard, it updates the firmware as well, if you installed your 3 dashboard you can click diagnostics. The original firmware is B01, after you update with Windows you will get B02 but if mac i am not sure

---

Added on September 21, 2012, 9:33 pmAnd MDMA has been able to show Turbo 3G+ since B01 stock firmware

This post has been edited by linkeong: Sep 21 2012, 09:33 PM

Windows show B04 and Mac shows B05
My MF680 never perform well

just finally figure out how to flash U mobile latest firmware & dashboard to my ZTE MF680 3 SET

and it improve a lot more than the firmware just now i flash with ( DL_MF680_H3G_SE_EUV1.00.05.exe )

after flash with u mobile firmware and dashboard

MDMA signal is totall FULL in RSSI : >-51dBm on both UMTS900 or UMTS2100 tower


diret plug in pc usb, only with HSPA+ signal on blue LED blinking

[attachmentid=3061693]

DIrect plug in speed super stable between 1~ 1.2MB/s on HSPA+ with new U mobile dashboard

[attachmentid=3061694]


with router, signal improve from normal 70 to now 87% stable and IDM speed around 1.7~1.95MB/s this house on purple LED

[attachmentid=3061695]

This post has been edited by chuahcs79: Sep 21 2012, 09:43 PM

Thanks for the tips Chuah
Downloading it right now

http://www.u.com.my/broadband/firmware-upgrade

This post has been edited by blacktubi: Sep 21 2012, 09:44 PM

u cannot directly try to flash normal way,

it will say your dongle is not allow to update due to compatibility issue

let me do some screenshot to show you how to flash it over to U mobile firmware and dashboard

let me do video screenshot and upload it here

This post has been edited by chuahcs79: Sep 21 2012, 09:55 PM

Ya, its not working
Thanks in advanced

after flashing the new firmware my LED purple hilang dunno where ald =.= but speed same, 1.plusMB/sec =.=, now waiting for the Umobil version, hehhehhe

You really lucky man. 16000 QoS with nice speed
My area congested for months

LOL, i still wanna the purple light, complained but no actions taken?

sifu chuah, million thanks in advanced, wanna grab back my PURPLE light

This post has been edited by ddr3: Sep 21 2012, 10:15 PM

Action = NO
Excuses = YES

They keep telling me the site is down. But I am getting the same CELL ID as last time and same signal
Wait until I am free I will write in to CfM and SKMM