OPPA GANGNAM STYLE ~~~~ OPP OPP OPP OPP ~~~~ OPPA GANGNAM STYLE ~~~~ WAHAHAHAHAHAHA !!!!
WAS HERE !
kenji TT tht time u dance and entertain us~! TQTQ
QUOTE(davidke20 @ Aug 3 2012, 04:03 PM)
my car have this problem when I took over, I use contact cleaner sprayed on dry cloth to clean throttlebody gaodim jor before I leave some smoke to the previous owner. However, I would take a safe guess on some DIYable stuff.
1) Nasty air filter, change 1 2) Petrol too much residue. Release old fuel, pump a tank of soup water primax then drive like no tomolo 3) Throttlebody sumbat. Clean with contact cleaner(do not directly spray-map sensor inside mar)
And few of UN-DIYable guess:
1) ECU sot jor 2) Power steering pump start to die, if it jam then engine dead la 3) Gas pedal servo misaligned
Watcha think?
David tai lo... how to pasang the Vacuum Meter? teach me...lolz
purposely drive into pothole to test the absorber,
jam brake your car to test the ABS and EBD (Maybe airbag too),
purposely scratch the body paint and plastic part inside to test the reliability of those part,
turn on your aircon to the max to test out the powerful aircon,
blast ur speaker to max to test out the speaker,
slam 9 your door with brute force to test the door strength,
hopefully won't, hopefully.
after you mention this, yesterday i did that, SmartTag gate doesn't open, and giving error code 'Belakang Sila Jarak'.. super emergency break, and the rear break 'krukkk.. krukkk..' need to send my car to COSE for drum break replacement since Proton already come out with official solution about the rear brake problem...
after you mention this, yesterday i did that, SmartTag gate doesn't open, and giving error code 'Belakang Sila Jarak'.. super emergency break, and the rear break 'krukkk.. krukkk..' need to send my car to COSE for drum break replacement since Proton already come out with official solution about the rear brake problem...
That means ABS kickin la, brake pulsation, why bother....
after you mention this, yesterday i did that, SmartTag gate doesn't open, and giving error code 'Belakang Sila Jarak'.. super emergency break, and the rear break 'krukkk.. krukkk..' need to send my car to COSE for drum break replacement since Proton already come out with official solution about the rear brake problem...
Got official solution for rear drum brake tak tak / kruk kruk problem?
ABS kickin in? i thought slow speed @ 20km/h, ABS not functioning? am i right dares? i heard it somewhere from previous thread v26... Link by lenzmark i never use that BET lane... CVT indicator turned on again?? did you play with that SAT button before it happen?
I just got the car last tuesday. brand new manual. i have no idea about the rpm because my brother is driving my car now. He is complaining like hell about flx. worse part is im driving his myvi for now.. kena flame kau kau everday.. hahaha booked appointment with SC for tomorrow.. hope nothing serious..
You go back try 1st then report us, book a slot with SC, with/without problem go check² better. Cornering engine dieded can big can small(可大可小). Plotong quality increased alot since PERSOGA, only thing is QC still very Gangnam, so yours could be a small vacuum leak(but if that's the case brake also won't function properly) or bad DbW positioning(throttle body not fully shut after release gas pedal)
QUOTE(kenjilew @ Aug 3 2012, 04:15 PM)
maybe his bro need the "can put alot durian" boot ~ XD
May be start business already
QUOTE(GP mad man @ Aug 3 2012, 04:29 PM)
@mahihi, the FSB itself only white color rite? can help me spray it to full black bar? of course can pay u for the extra fee
any wording on the bar? if nothing then confirm i want to spray before install it
Those bars came in WHITE without wordings/sticker. You may spray it black before putting up the sticker.
QUOTE(r3apers @ Aug 3 2012, 04:53 PM)
kenji TT tht time u dance and entertain us~! TQTQ David tai lo... how to pasang the Vacuum Meter? teach me...lolz
I'll do that..... I mean teach you pasang vacuum gauge