haih my wira injector got problem d ,
forman cakap nid chg the injector nid 3xx include pasang worth ka?
when idle at cold will mati engine plus now minyak manyak makan full tank can go 300++ only

I bought s/hand 240cc injector @ rm150 only... Anyway, what cc u looking for? I have 1 set of 210cc...
Btw, yours not as high fc as mine... Rm50 can go 150km only... (due to incompatible ecu)

if you remove the cat converter... there will be a gap between the piping...
so i put a swirling bullet/silencer there.... as i get a quite a noisy muffler... to minimize the sound of it...

the cat converter already got broken things/metal sound inside... plus it was dented.....
and the ori muffler already leaking.... (welded it twice)

Forgot to mention I installed 4-2-1 extractor Liao. Heehe feels good

Now I wanna Make my car to go faster in corners or turns. Should I install the full stabilizer for front and rear or just a part?

Sometimes I feel like going to terbalik d but luckily didn't.

Invest on suspension and rear ARB if yours is the old 1.5

mine is the 1.6 wira auto 1996 one

Invest on stiffer suspension

any peeps here got try the chasis foaming on wira before? Wondering if just do the undercarriage can cause the ride more comfort or harsh....

Hey guys, after installing a front strut bar will the car become more stable when cruising on highway ? or strut bar only improve stable for cornering only ? and 2 point and 4 point UR strut bar, which is better ?

4 point

Today, I went to the pump station to fill my nearly empty WiSE tank. Since I wanted to clock how many km I can go w full tank, I fill full tank lah. What's strange is, eventhough I've already filled up to RM80, the tank is still not full liao I bend down and look at the bottom of the car, woah fuel is leaking out heavily Straight away went to SC and get it checked, the fuel hose bocor sudah. No wonder I didn't get the 'psssssssshhhh' sound when I open the fuel cap, and my fuel also drain a bit faster lately. Heads up to you guys who has a similar problem, try checking your fuel hose.

last nite go vroom2 n cilok2 on my way back to penang.
stay on gear 2 quite alot.
( Auto )

then my FC got 10.2km/l only. ( isi full tank at kulim )
huhu..

and is tat killing my gearbox faster?

What is ARB?
My 1.5, memang hit bottom even when slow over bumps. Which suspension will help?

LOL, sorry for the crakshaft pulley, hahaha, guess it doesn't have aftermarket/ performance alternative version of crankshaft pulley

I saw some commercial info stating, the camshaft pulley must equipped with rubber to cushion the vibration, that's why some LCP like "mythelogy" is costing 500-600. Any comment?

---

Added on August 27, 2012, 7:16 pmRM50 go for 150KM???????? drink or leak??

This post has been edited by outpace: Aug 27 2012, 07:16 PM

bro ur wira isit 1.5 auto? btw you only change the extractor? cause i planning to change mine to 4-2-1 extractor but dont know how does it work cause exhaust system i dont really understand...haha..dont know whether can change only extractor or nid change whole set including those "tabung"...thanks

hehe...i tried asking this question last time...but no respond...anyway bro last time i was planning to do chassis foam also and i did quite a number of research and found out some results from other wira-ians who foamed their wira...and some say after the foam the feel is like "waja", comfort increase and less vibration those...cornering also better...
however, some people who foamed their car feels that its too harsh, too stiff already untill going over uneven road will feel bumpy or something like that...so i think it depends on personal opinion..
until now i havent do it yet cause i still feel abit afraid, one is because those who did chassis foam they inject the foam inside our car body, what is the specific measurement? i dont think there is any specific amount that they can measure and therefore may cause some people feel good after foaming and some feel bad..2nd thing is that once u foamed ur car, there no more turning back, u cannot remove it anymore, this is the thing i scared the most..hahaha..

anyway i plan to install the chassis alignment kit/stiff rings to improve comfort...at least that one can remove and i dont see any bad sides about it..haha..

just my opinion bro no offence ya

wow...haha...quite scary...btw bro before that you didnt notice leaking meh? like parking in ur house when u go out you should see petrol stain on the floor right?

btw mine recently also no more psssshhhh sound...scare already lah..haha..
bro mind to guide me how to check the fuel hose ar? i mean how to see whether its bocor or not..

thanks

felt lucky for you, it's darn dangerous, I had such experience and never want to try again, would need to claim insurance if anything happen.

---

Added on August 27, 2012, 7:21 pmI'm also very interested on this chassis alignment thing. How much roughly it cost?any idea? why?
quite rare to hear about it.

This post has been edited by outpace: Aug 27 2012, 07:21 PM

I looked several times before, no leaking was noticed. Plus usually before this I use to pump RM30 only, so there is no chance the fuel is going to be overflowing to the hose. Its just today that my instinct told me to look down haha.

Btw I think the best way to check it is to take it off. Only after the mechanic take it off I can clearly see there's a cut at the hose, most probably because of the aging of the hose, because there are also quite a number of cracks also on the hose. Try taking it off and check it out, there are two hoses, the big one is for the flow of fuel into the tank, the other smaller one is for the outflow of pressure from the tank, the one that should give you the pleasuring 'psssshhhhh'

Luckily for me I noticed it today. The spillage was huge. Your hose was the problem also?

This post has been edited by arsengal: Aug 27 2012, 07:57 PM

normall outside selling is around RM200-RM250...there are few brands which i think quite ok...like race tech of stiffring...

hi to all the sifu...
any suggestion for a good & affordable price for voltage stabilizer...?
i think my 3 year ++ old VS not really stable adi...

that's what I got from googling. I am having the same thinking as you also because after foamed it later if too harsh then we cannot remove it already....
From AutoFoam website, they stated if only foam the undercarriage is for comfort ride. But another selling told me if foam the undercarriage will be a bit more bumpier, if want comfort then foam the door sill