there are broken picture links on the 1st post...

Guys, thx for the replies, 1 more question k.

For DDR2,

2 sticks of 1 gb value ram better or,

2 sticks of 512mb high perfomance ram better?

for me , memory space takes priority

Using a performance RAM but curious what chipset is it using? Don't wanna pull of the sticker/heatspreader to prevent warranty void? Then check it out here...

http://www.techpowerup.com/memdb/

Sorry if this is a repost. I just wanna share a good site for everyone to see.

hi guys..

What is the difference between PC5300 and PC2 5300 ??

and why is my PC2 5300 showing 333Mhz in CPU-Z?

Thanks

This post has been edited by mindkiller6610: Feb 19 2007, 12:13 AM

667/2 = 333.5 appr0x 333Mhz. By the way, both actually resembles the DDR 667Mhz. Just the 2 is to let user know that it is DDR2 RAM. It is also to differentiate between DDR and DDR2.

I got a question,how stable is high performance 3gb RAM put in a mobo?

This post has been edited by RaedeanBF2: Feb 19 2007, 07:00 PM

3GB?

Not sure about that. But just to inform you that 32-bit OS still do not support more than 4GB RAM. And it also recommend to use only 2GB RAM for the 32-bit OS.

hi i have a question
i have a DDR SDRAM model PC 2100
does nowaday market still have the 1 GB RAM of this model?
thx for the reply.

i need help thanks...

, AFAIK, yes, you can always plug in DDR400 onto DDR333/DDR266 base mobo

aladdin , watch out for some brand
i got bad experience from Corsair Value DDR400
unbootable in DDR266 mobo
because it don't have DDR266 / DDR333 in SPD table

Hi,

Need advise here. Can 3GB RAM (2 x 1GB + 2 x 512MB) operate as dual Channel?? My MOBO got 4 slot for RAM. The 1st & 3rd slot in white colour while the 2nd & 4th slot are black. So i put my 2 x 1GB RAM in 1st & 3rd slot and the others 2 x 512MB RAM in 2nd & 4th slot.

The problem is when i check using CPU-Z, it doesn't show the RAM currently operate in dual channel mode. The 'Channel' box just blank. What should i do to make it dual??

Thanks

can anyone teach me how to OC ram besides fine tuning tCL, tRCD, tRP, tRAS and CAS...
all this time i only manage to get info regarding tCL, tRCD, tRP, tRAS and CAS... what about other parameters like
trc
twr
trrd
trwt
twtr
trtp
twrrp
twrwr
trdrd
trfc
1T/2T memory timing

the main question...
1. how am i suppose to calculate the value to obtain the best config for tCL, tRCD, tRP, tRAS and CAS.
2. how to tune the above parameters? any calculations involve?

This post has been edited by point blanc: Mar 3 2007, 02:38 PM

I have a question, if anyone is willing to answer.
For starters, I have no clue whatsoever about leet computer stuff, how it ticks or whatever.

Anyway. How do you determine what type of RAM your motherboard can support? Say you want to get a new stick of RAM. Which do you buy?

Just something mention-worthy : My friend took out my RAM once to have a look at it. There was no inscription on what type it was though.
I do know I only have 256mb

Yes, go ahead, laugh. Can anyone help? Please?

Thanks.

in order to have all 4 RAM run at dual channel, is best u use all identical ram, meaning all 4 slot were using 1gb or 512mb ram, dun cross mix, and same latency, clock speed n brand too.

in ur condition, best is u take out ur 2x512mb so that ur 2x1gb could run at dual channel. btw is ur 1gb ram identical to each other??

and of course plug at the same color slot.

correct me if I were wrong

This post has been edited by elico: Mar 4 2007, 06:35 PM

hamnoj,
try refering to:
1. your mobo manual for details - normally manufacturer do state compatibility RAMs
2. check your mobo manufacturer's webpage for details.

for the unknown RAM you can always check using
1. Cpuid
2. CPU-Z
3. SiSoftware Sandra
4. any other benchmark program...

regards,
point blanc

anyone can answer me why my windows detect apacer pc2700 512MB ram as 256MB only?my mobo support pc1600/pc2100..my bios is already the latest version..i use pc wizard and cpu-z both also detect that ram as 512MB..

I would like to know, what difference does it make for having 1T or 2T timing?Which one is better and why?

And does having a tight timing ram (2-2-2-5) is better or having a ram like 3-3-3-8 is better in term of overclocking ability?If i wanted to overclock, what timing should i be looking at and choosing?

Thanks... I'll try it later...

BTW, what do u think is the best.. 3GB RAM run not in dual channel mode or 2GB RAM run dual channel??? Need advise / opinion here. Thanks again

This post has been edited by GuyzNexDoor: Mar 10 2007, 12:41 PM