Outline ·
[ Standard ] ·
Linear+
RAM Handbook, updating ... zlol 23/12/07
|
SUSMatrix
|
 Jan 17 2007, 09:19 PM
|
|
QUOTE(jinaun @ Jan 17 2007, 08:41 PM) you can always read manuals from other board manufacturer that uses the same chipset according to this site http://www.msi.com.tw/program/products/mai...ail.php?UID=610KM400 supports up to 4 memory banks .. in theoretically.. u can use 2 double sided RAM... if that board ur using follow the design guideline by VIA.. it should be able to work.. unless its board/chipset limitation.. as u have put it.. or something else.. sorry...u gotta try with other RAM to find out more... My problem is, it detects only the double sided 512MB and not the 256MB. I read somewhere that double sided takes up two channel or something like that?? The mobo is an ASUS. Anyone has similar experience |
|
|
|
|
|
TSjinaun
|
Jan 17 2007, 09:30 PM
|
where are my stars???
|
QUOTE(Matrix @ Jan 17 2007, 09:19 PM) My problem is, it detects only the double sided 512MB and not the 256MB. I read somewhere that double sided takes up two channel or something like that?? The mobo is an ASUS. Anyone has similar experience it can be some other reasons.. such as memory chipset incompatibility, or needed bios update.. other than that.. i do not know.. perhaps.. its due to some bad/loose SMD components.. double sided ram takes 2 banks/ranks..if i'm not wrong. |
|
|
|
|
|
thoo11
|
Jan 19 2007, 07:42 PM
|
New Member
|
any 512mb ram in around RM300??
|
|
|
|
|
|
t3chn0m4nc3r
|
 Jan 23 2007, 04:57 PM
|
|
|
QUOTE(thoo11 @ Jan 19 2007, 08:42 PM) any 512mb ram in around RM300?? har...? u want ar...? i sell u 200 enough la...  |
|
|
|
|
|
TSjinaun
|
Jan 23 2007, 09:44 PM
|
where are my stars???
|
oi.. my thread not for selling selling or buying ler...
u guys can use PM or other forums in LYN for that..
This post has been edited by jinaun: Jan 23 2007, 09:46 PM
|
|
|
|
|
|
chinkw1
|
Jan 24 2007, 03:25 PM
|
Look at all my stars!!
|
Dear Ram sifus,
I now have a 512mb DDR PC3200. If i buy 512mb DDR PC4000 to pair up with it can or not pls?
|
|
|
|
|
|
waif
|
Jan 25 2007, 01:07 PM
|
Getting Started
|
QUOTE(chinkw1 @ Jan 24 2007, 03:25 PM) Dear Ram sifus, I now have a 512mb DDR PC3200. If i buy 512mb DDR PC4000 to pair up with it can or not pls? U can pair it up but ur new ram will be limited down to the same level as ur old ram. Which means why would U pay more to use a lower power ram.? |
|
|
|
|
|
Lefty
|
Jan 28 2007, 12:12 PM
|
|
|
what is the difference between normal ram and performance ram ? if i not plan to overclock. is there any differences between this two ram ?
|
|
|
|
|
|
J-Slade
|
Jan 28 2007, 01:03 PM
|
|
|
QUOTE(Lefty @ Jan 28 2007, 12:12 PM) what is the difference between normal ram and performance ram ? if i not plan to overclock. is there any differences between this two ram ? If you're planning to just play with the RAM by default then there is no difference. EVen if you're planning to run stock frequency, you shld at least use tight timings to make full use of performance RAMs. I have a question, what is the best chipset for DDR1 that can run the highest frequency at 3.0v and below? |
|
|
|
|
|
ktek
|
Jan 29 2007, 12:46 AM
|
|
|
QUOTE(J-Slade @ Jan 28 2007, 01:03 PM) I have a question, what is the best chipset for DDR1 that can run the highest frequency at 3.0v and below? TCCD from Samsung perhaps ? many can do over DDR600 on 2.8V nice one  CODE Any kind soul here willing to lend me his Winbound-BH5 for just a few days? |
|
|
|
|
|
J-Slade
|
Jan 29 2007, 12:48 AM
|
|
|
QUOTE(ktek @ Jan 29 2007, 12:46 AM) TCCD from Samsung perhaps ? many can do over DDR600 on 2.8V nice one CODE Any kind soul here willing to lend me his Winbound-BH5 for just a few days? Alright, TCCD it is. I'll try hunt for some 2nd hand ones of course... btw, I am serious about the Winbound.  This post has been edited by J-Slade: Jan 29 2007, 12:49 AM |
|
|
|
|
|
phatboss
|
Jan 30 2007, 10:05 AM
|
|
|
hav 1 question guys...
if we using ram dat has dual channel but the mobo doesnt support the dual channel,will it burnt the mobo?
|
|
|
|
|
|
ktek
|
Jan 30 2007, 05:50 PM
|
|
|
QUOTE(phatboss @ Jan 30 2007, 10:05 AM) hav 1 question guys... if we using ram dat has dual channel but the mobo doesnt support the dual channel,will it burnt the mobo? do you know what is 'dual channel' first ? if mobo don't support dual channel means it will run at single channel another kind of example : if a BMW can run over 100KM/H but malaysia road got undang only can run 50KM/H , it won't explode , right ? |
|
|
|
|
|
phatboss
|
Jan 31 2007, 09:57 AM
|
|
|
yes i know wut is dual channel is..
juaz concern dat if it can burnt mobo..dats all...
|
|
|
|
|
|
zeroglyph
|
Feb 1 2007, 05:21 PM
|
|
|
QUOTE(phatboss @ Jan 31 2007, 09:57 AM) yes i know wut is dual channel is.. juaz concern dat if it can burnt mobo..dats all... dual channel depends on mobo. not ram. if your mobo does not support dual channel, you can't run dual channel even with performance RAM. no such thing as exploding mobo. all DDR RAM can run dual channel. you just need to know how to arrange it on the mb. ps: you need to learn more on dual-channel. |
|
|
|
|
|
J-Slade
|
Feb 3 2007, 01:25 AM
|
|
|
QUOTE(zeroglyph @ Feb 1 2007, 05:21 PM) dual channel depends on mobo. not ram. if your mobo does not support dual channel, you can't run dual channel even with performance RAM. no such thing as exploding mobo. all DDR RAM can run dual channel. you just need to know how to arrange it on the mb. ps: you need to learn more on dual-channel. Yeap, he's right. phatboss, you need to understand that there is no such thing as 'dual channel RAM'. There is only dual channel support on motherboard. And any RAM with matching chipset, capacity and frequency can run dual channel.. p/s: Anyone here got some Winbond BH-5 to lend me? I'll buy you lunch  This post has been edited by J-Slade: Feb 3 2007, 01:26 AM |
|
|
|
|
|
zeroglyph
|
Feb 4 2007, 07:19 PM
|
|
|
QUOTE(J-Slade @ Feb 3 2007, 01:25 AM) There is only dual channel support on motherboard. And any RAM with matching chipset, capacity and frequency can run dual channel.. no offense J-Slade, just to clarify a bit. it only depends on freq and capacity(maybe voltage at some point)for standard operation. for optimum performance, use the same chipset. a winbond will run dual channel with hynix. but a hynix will not OC as good as a winbond  . |
|
|
|
|
|
aladdin
|
Feb 13 2007, 01:32 AM
|
|
|
i need some information here....
I'm using:
P4 2.4B
Asus P4B533-E
2*256MB Apacer PC2100 CL2
thinking of get another 512MB ram...Can i buy DDR400 although the manual written only PC1600/2100 is supported by the Mobo?
|
|
|
|
|
|
ariesto
|
Feb 13 2007, 04:34 PM
|
|
|
Guys, please enlighten me please, really noob in this. Whoever can't understand what i'm saying please don't flame me.
1. The high-performance 1Gb DDR2 677 ram is selling at RM390,
written ram come in pairs, pairs means 2 sticks of 1Gb ram or 2 sticks of 512Mb Ram?
3. 1 stick of 1Gb DDR2 Ram on mobo = 1Gb
2 sticks of 1Gb DDR2 Ram are actually 1Gb or 2GB on board?
|
|
|
|
|
|
ktek
|
Feb 13 2007, 07:55 PM
|
|
|
QUOTE(ariesto @ Feb 13 2007, 04:34 PM) Guys, please enlighten me please, really noob in this. Whoever can't understand what i'm saying please don't flame me. 1. The high-performance 1Gb DDR2 677 ram is selling at RM390, written ram come in pairs, pairs means 2 sticks of 1Gb ram or 2 sticks of 512Mb Ram? 3. 1 stick of 1Gb DDR2 Ram on mobo = 1Gb 2 sticks of 1Gb DDR2 Ram are actually 1Gb or 2GB on board? you see , RM390 divide 2 = RM195 so should be 2 x 512MB |
|
|
|
|
Quote
0.0257sec
1.09
6 queries
GZIP Disabled