Haha...it might be in theory but I don't think using mineral really affects the crank starting. I've been using mineral for my prev gen cars, all starting well during morning, engine sound is another matter when using FS or mineral at early start. Damage to piston, bore wall damage at initial start might be difference between mineral and those extra start protection lube such as FS, magnatec and now Havoline (no way to prove it tho).

In general, mineral still ok at our weather coz there's really no big difference between semi and mineral, FS is another story.

So my conclusion is there is a problem somewhere. Lube should not matter on crank starting unless its on supercold weather where the W in front of lube codes matters.

He lives in the jungle. Very cold until have condensation. 

Don't play around with jungle creatures. They are wild.

fetch chick not tiring la..almost bang cow sumore
fetch sis "ki ki kat kat"

Just a question to all PE manual drivers here.

Test drive my friends's  PE manual.

When I shift from 1st to 2nd gear OR 3rd to 4th gear, my elbow always hit the arm rest on the middle.

I feel the arm rest is to long.

Any of you manual drivers having this problem?

Any Avicii fans here?
http://www.youtube.com/watch?v=6VJBBUqr1wM&feature=share

prefer enough is enough or fade into darkness 

whole day just not more than 10 post...

You're very good in counting 1 to 10, aren't u?

Any Avicii fans here?
http://www.youtube.com/watch?v=6VJBBUqr1wM&feature=share

Hi sifus,

Any idea to change the brake servo for persona b line. The brake was too spongy, this the second time accident within 6 months.

I driving slow as below 60 km/h , however after press the pedal, the car still can't stop some more lock wheel. Any ideas for me to improve the brake??

I search google found evo3 or sr20 brake servo, double layer can fit into persona, im still think of should go ahead for this??

P/s: my brake pad : bendix mtk
      brake fluid change: last interval 10k km

Thank you

how come can lock wheel wan ?
persona no abs wan meh ?

how come can lock wheel wan ?
persona no abs wan meh ?

Hi sifus,

Any idea to change the brake servo for persona b line. The brake was too spongy, this the second time accident within 6 months.

I driving slow as below 60 km/h , however after press the pedal, the car still can't stop some more lock wheel. Any ideas for me to improve the brake??

I search google found evo3 or sr20 brake servo, double layer can fit into persona, im still think of should go ahead for this??

P/s: my brake pad : bendix mtk
      brake fluid change: last interval 10k km

Thank you

Hi sifus,

Any idea to change the brake servo for persona b line. The brake was too spongy, this the second time accident within 6 months.

I driving slow as below 60 km/h , however after press the pedal, the car still can't stop some more lock wheel. Any ideas for me to improve the brake??

I search google found evo3 or sr20 brake servo, double layer can fit into persona, im still think of should go ahead for this??

P/s: my brake pad : bendix mtk
      brake fluid change: last interval 10k km

Thank you

Hi sifus,

Any idea to change the brake servo for persona b line. The brake was too spongy, this the second time accident within 6 months.

I driving slow as below 60 km/h , however after press the pedal, the car still can't stop some more lock wheel. Any ideas for me to improve the brake??

I search google found evo3 or sr20 brake servo, double layer can fit into persona, im still think of should go ahead for this??

P/s: my brake pad : bendix mtk
      brake fluid change: last interval 10k km

Thank you