EK Supreme HF jetplate6
2x RX360 + 12x GT 1850rpm
D5 + EK Top
EK X2 250 res


   

that y la... cos... hmmm... i serious terkejut after saw the result.. wukaka

so which is the real 1... hahaha

here 3770k

Delidding won't help IB cool better. It is a problem with IB's power density. Tested here.
Your temps for 4.5GHz @ 1.3V is so high considering that you have a RX360 cooling it.

I just change the vcore and turbo multipler.
Other auto. Lol... And chapalang ram. Lol
Btw i run cinebench and get application error... 
wprime 1024

owikh84... y your cpu score at sandy so high 1 ar.. about 70k score

cinebench

I've seen better overclocking from Core i7 3770K's, better as in requiring less voltage than comparable Core i5 3570Ks maybe due to better binning. Try getting a Core i7 3770K and see if you can get better results.
Many said that temp is not necessarily heat. IB may have higher temps but it actually makes less heat than SB. Strange and maybe confusing to some but I find it correct.

anyone here can suggest whether it's a good move to upgrade from 2600k to 3770k? From the review in guru3d they mentioned something like not a significant upgrade and base on Kelvin's Vantage score, looks only a bit faster than my 4.8GHz 2600k score.

Kelvin, your cpu vantage score above is for the stock 3770k or OC'ed one? if OC'ed, is it 5.0GHz?
Thanks

SB i7 to IB i7 is a very small upgrade, unless you have no idea where to spend the money, I suggest you keep the 2600k.

5.2Ghz at 61C?

If 5.2ghz at 61'c full load... I wil be very happy!! Lol

Btw i still suspect the temp report error.
Once touch 100'c, the proc itself will lower down the speed to saver speed.

5.4ghz boot to windows need 1.56v vcore. But not stable. Still tweak it. Lol
Shepard:-

Im using chapalang ram, so nth more i can tweak jor. Tdp already set to 150.

Sure
And i dun think it reach 100++'c it must be something wrong!!!

The results? No difference, IHS removal did not help. High temps are caused by the tightly packed cores.

So sad.. but i guess i still will go for ivy bridge because for the PCIE 3.0 only.. for future cards.

Using dual ADDA fans(171CFM) on H100, not yet buy processor yet, still deciding which to go as i more on gaming only, maybe i5 

---

Added on April 29, 2012, 11:18 pmowikh84, faster buy the i7 and overclock . Wanna see da result

Almost done with our LDPV V4 bench table. Didn't have enough tube to complete the loop. Once it is ready we'd see what IB can do on our setup

hehehe... i will throw the 3770k once i got the mobile extreme version 

If the dimastech is epoxy powder coated it should be very hardy. Perhaps it was the smooth powder coating wHich is not so reliable.

Well had a quick test of my new retail CPU Sunday - only had about 25lts of LN2 and very hot - so my session only lasted an hour or so before everything was soaked and LN2 was running low.

These Ivy Bridge CPU's certainly run very hot which may limit their appeal for air and water benchers - but if you have something colder - well they just fly 

My CPU seems to be somewhere at the lower end of achievements for retails seen to date - benching 6300+ for Pifast, Super Pi, and Maxxmem with no real issues. No way my board was going to run this cpu any higher though, 6350 was maximum regardless of volts used. Will try another board this coming weekend and see if this is definitely the cpu limit or not

Memory used is Team Xtreme 2600 Kit 10-12-12-31 2T - not maxed out just focused on CPU max to start 

Heres a few pics - no real tweaks, just a light os install
Someone order some bandwidth??

my very 1st time touchin intel since ages ago... pls bear with my mediocre attempt...