this i what i get after a week of daily phone calls to TmNet, emails with screenshots of various speedtest results, 2 house visits by their (clueless) technicians

Before




After

It this ok?


Attached thumbnail(s)

holy s***
1st time see 40db snr margin

DSLAM is about ~800m from my house but the line attenuation and Downstream Noise margin like i live 4Km from the exchange..Never get past 13dB and average of 6-10dB..


This post has been edited by OneFarEast: Sep 4 2009, 08:27 PM

Guys,

Can you check for me for my this line data is that normal ?

I always get D/C and upload file jpg about 100K~150K also need to take longer time compare with i use maxis bb

i feel you line is in extremly nice condition but duno why will dc..
line attenuation low and snr margin high is nice.

I keep getting SNR rate fluctuations. It's pretty much unstable at the moment. Disconnections are very common.

According to the router log.



Any idea why is this happening?
Started happening since two days ago. At night, the disconnections are less frequent.

Can anyone check my also ?? recently feel alot slower...

Hi guys,
I discovered this error pops ups in my aztech 605ew recently.

Sep 8 23:25:04 2002: opensock: connect() error "Connection timed out".

Sometimes, when opening a page, an error like http tinyproxy cannot load the page. refreshing sometimes will load the page again?

holy shxt , This is mine...

so now where should i call to ? tmnet or telecom ?

[attachmentid=1213966]

This post has been edited by aloner455: Sep 24 2009, 07:41 PM

is this normal?thx in advance.


Attached thumbnail(s)

My DSL details are as below:


Just got my upgrade done yesterday to combo wifi... Erm i noticed my line attenuation is very high compared to the others, will that affect my internet? but i m not facing disconnection problems now...

Any way to decrease attenuation value? And my data rate is 1536, shouldn't it be 2045?

This post has been edited by zellleonhart: Sep 25 2009, 01:23 PM

Language
Current Langugae English
Available Langugaes English Deutsch Français Espa駉l
Time Friday October 2,2009. 0:46:55

Version Info LAN Settings
Firmware Version 2.00.18 LAN MAC Address 00:17:3F:5A:FA:CB
Boot Code Version 1.0.37-8.7 IP Address 192.168.2.1
Hardware F5D8631-4 Subnet Mask 255.255.255.0
DHCP Server Enabled

Internet Settings WLAN Settings
WAN MAC Address 00:17:3F:5A:FA:CC Wireless Function Enabled
WAN IP 60.48.204.253 WLAN MAC Address 00:17:3F:5A:FA:CB
Default Gateway 219.93.218.177 SSID BELKIN N1
Primary DNS Server 202.188.0.133 Wireless Mode 802.11n & 802.11g & 802.11b
Secondary DNS Server 202.188.1.5 Wireless Channel Auto
Security WPA-PSK(no server)
ADSL
Type Fast Features
Status No Defect Firewall Enabled
Downstream Upstream
NAT Enabled
Data Rate(Kbps) 1536 512
UPnP Enabled
Noise margin (dB) 18.0 19.0

Output power (dBm) 12.1 17.2

Attenuation (dB) 54.0 30.5

how abou my one

Is my line good?

my stupid line before TM come.. I suppose to get 2048 downstream and 512 upstream zzz -.-

512Kbps SNR (D&U) >12dB Line Att (D&U) <60dB
1Mbps >12dB <55dB
2Mbps >15dB <35dB
4Mbps >15dB <30dB

---

Added on October 18, 2009, 3:30 amLine Att= signal loss due to distance, using copper as limited to 65dB copper can support

it calculate ur location to exchange, if u want to change thiis value u need to change your connection port

---

Added on October 18, 2009, 3:35 amLine Att=low, probably r u using extension wire

This post has been edited by whopperblack: Oct 18 2009, 03:35 AM

If I see my DATA RATE to be at 2045/508 instead of 2048/512, will it cause any problem to my connection?

I use 512kbps package.

that mean???
now my modem adsl light not blinking..cant on...this should be what problem??
need some advice

Modem Status

Connection Status Connected
Us Rate (Kbps) 224
Ds Rate (Kbps) 2048
US Margin 6
DS Margin 19
Trained Modulation GDMT
LOS Errors 0
DS Line Attenuation 36
US Line Attenuation 25
Peak Cell Rate 528 cells per sec
CRC Rx Fast 1
CRC Tx Fast 1
CRC Rx Interleaved 0
CRC Tx Interleaved 0
Path Mode Fast Path
DSL Statistics

Near End F4 Loop Back Count 0
Near End F5 Loop Back Count 0

mind to comment on my line ? thx ya

This post has been edited by steventan85: Oct 26 2009, 06:49 PM

This is..... weird?



I don't know either my line is good or bad since the Downstream Attenuation doesn't have any numbers.
Based on the Upstream Attenuation, it's bad, but I have to state that I've NEVER faced any disconnection for almost 3 months.
Except the times when I turned of the modem on Aidilfitri & when I disconnect from Streamyx myself to change IP to get the best download speed from RS & MU.