my first RAM OC achievement .

using KVR RAM , Elpida chip , double sided chip .
do advice me .

you forgot to state, yours is elpida BFSE.
not all elpida is good, such as mine (BDBG, BFBG) not good at all

Corsair Dominator Platinum 2133 MHz DDR3 review

good review but hope to see this module at higher rated speed

This post has been edited by lengchai86: Sep 3 2012, 07:37 PM

Kingston 8 GB Dual-Channel DDR3 SDRAM Kits Roundup

^Kingston use hynix CFR chips....not so god.

http://www.ocaholic.ch/xoops/html/modules/...emid=801&page=1

This post has been edited by stasio: Sep 4 2012, 12:42 PM

all KHX using hynix CFR chip?

what's ivy bridge max supported mem divider if paired with B75 or Z77 chipset?

Can read here:
http://www.xbitlabs.com/articles/memory/di...ddr3-2x4gb.html

Only 2666 kit is samsung IC.

This post has been edited by stasio: Oct 6 2012, 08:57 AM

KHX 1600X9D3K2/4GX using
Elpida J1108BFSE

We talking about new sets of Kingston,as posted above.

Little update from my Sammy greens YK0 1205
Reduced voltage to 1.325V (default voltage 1.35V!)
still at DDR3-2133 CL10-11-10-30-1T, everything else set to AUTO

I cant use all 4gb ram in 64bit window 7. how?

problem and hardware details?

This post has been edited by saturn85: Oct 3 2012, 03:52 AM

Overclocking Samsung 30nm DDR3 ram is like a breeze..once set, it ready to go, i never tested it with memtest..just use for folding@home..

Memory Performance: 16GB DDR3-1333 to DDR3-2400 on Ivy Bridge IGP with G.Skill


This post has been edited by saturn85: Oct 20 2012, 04:40 AM

izzit 1.65v to high stock voltage only 1.5

1.65V is very safe <-- as told by my sifu dato' Kuntawakaw
even some otai here running 1.8-1.85vdimm during benching
and most review here in LYN running bench at 1.7-1.75V but of course not recommended for 24/7 setup

one of my favorite reviewer, Sir ah_khoo
xtune review and ballistix tactical

ok tq

GeIL Evo Veloce Review: 2x8GB at DDR3-2400 C11-12-12 1.65 V