Do you make the test alre ? I'm very interest on VLP ram lolx..

yup..stable 20 days test with the stress program at 1.5vdimm/1866mhz

G.Skill TridentX Review: 2x4GB at DDR3-2666 C11-13-13 1.65V


This post has been edited by saturn85: Oct 31 2012, 04:14 AM

^This one is single sided hynix chips.
Better is 2600C10,samsung chips.

My 2600C10 running stable 2666 @10-12-12-27-1 ,1.66V 24/7.

will upload pic later (my daughter Z77X-D3H system)

New kits on newegg:

G.Skill TridentX 2x4GB at DDR3-2666 C10-12-12 1.65V
G.Skill TridentX 4x4GB at DDR3-2666 C10-12-12 1.65V



This post has been edited by stasio: Oct 31 2012, 12:09 PM

Apacer ARES 2000 (2GbX2) 9-10-9-27 2T (1.65V)


Chip : Hynix BFR


1600 6-8-7 1T @1.675Vdimm.
1.65V BSOD
1.66V cannot pass hyperpi8M
currently tested on AMD 960T Phenom II
sorry no prime95 test


This post has been edited by lengchai86: Nov 8 2012, 11:20 PM

2500 10-13-12 1T 1.685Vdimm

can i ask all epilda chip good for oc or not i see kingston value 8gb 1600 using epilda chip is it good for oc

haha..all i can say..better grab those RAM that using Elpida chip while it still on the market u can look my benchie here with Kingston KVR 2GB but for now im hunting for Sammy Green RAM

http://www.mushkin.com/Memory/Silverline/996770.aspx

i bought this ram. now wondering if these ram can be OC or not?

would help if can show how to achieve it.

ur using first generation i7 right (from ur siggy ) i wonder ur bios got memory divider or not..since first generation is based on FSB when want to do OC

Depend on your system.
For Sandy or Ivy is not good.

which one ya? my hv bclck. memory divider is what?

only certain elpida (BFSE, BBSE, hyper) is good.
i have tried BDBG (single sided) and BFBG, both not good at all
most good chip is on the 2gb stick, i don't think 8gb stick have such a good chip
btw you can try OC them and post result here for our reference

intel more faster then amd why
















sorry borrow your pic miewan92 tq


Attached thumbnail(s)

haha..i dont think so bro..i just bought new 4GB KVR with Kingston name stated on it chip..and it sucks..even not stable ramp up 1600mhz with default timings and benchmark same la as the AMD benchie picture only the latency a bit good

Enthusiast Manages to Overclock DDR3 Memory Module to 3.90GHz. G.Skill TridentX DDR3 Module Overclocked to 3900MHz



This post has been edited by saturn85: Nov 16 2012, 01:18 AM

i would like to try up samsung 30nm ddr3 ram 8gb kit but newegg shows discontinued. any idea where i can get them? single stick is available but will it provide stable oc over 8gb kit?

So you buy 2 single sticks.........

http://www.newegg.com/Product/Product.aspx...N82E16820147094

yeah.was thinking about that too but wondering whether the result will be same with the 8gb kit or not. thus im here looking for advice from you guys.haha

not so sure this helps but but 2 x single stick of samsung lp ram work @ 2400MHz 2T flawlessly on my FM2 platform. d thing with samsung lp ram is there's no guarantee since they're not specifically binned @ high frequency, but 2400MHz shouldn't be a problem, anything above is down to luck ledi.