QUOTE(Matrix @ Oct 17 2013, 11:56 AM)
i use this.
TPLINK TL-WR1043ND
http://www.tp-link.com/en/products/details...del=TL-WR1043ND
Plug and play only.
No special settings, just key in the user id and password in the router, that's all.
That's weird because mine doesn't work when I did the same as you.TPLINK TL-WR1043ND
http://www.tp-link.com/en/products/details...del=TL-WR1043ND
Plug and play only.
No special settings, just key in the user id and password in the router, that's all.
I've removed my username and MAC address from the system log.
202 1st day 00:02:35 PPP INFO rcvd [PAP AuthNak ""]
201 1st day 00:02:35 PPP INFO sent [LCP TermAck]
200 1st day 00:02:35 PPP INFO In pppd the httpd-id is 592, set link phase is 0x4
199 1st day 00:02:35 PPP INFO send_phase 2098 pppd_phase = 0x4
198 1st day 00:02:35 PPP WARNING LCP down
197 1st day 00:02:35 PPP ERROR LCP down
196 1st day 00:02:35 PPP INFO rcvd [LCP TermReq]
195 1st day 00:02:34 PPP INFO sent [LCP code=0xc]
194 1st day 00:02:34 PPP INFO sent [PAP AuthReq user="******@timebb" password=(hidden)]
193 1st day 00:02:34 PPP INFO In pppd the httpd-id is 592, set link phase is 0x5
192 1st day 00:02:34 PPP INFO send_phase 2098 pppd_phase = 0x5
191 1st day 00:02:34 PPP INFO rcvd [LCP Ack mru=1480 magic=0x2fa7c3b]
190 1st day 00:02:34 PPP INFO sent [LCP Ack mru=1492 auth=pap magic=0x33235419]
189 1st day 00:02:34 PPP INFO rcvd [LCP Req mru=1492 auth=pap magic=0x33235419]
188 1st day 00:02:34 PPP INFO sent [LCP Req mru=1480 magic=0x2fa7c3b]
187 1st day 00:02:34 PPP INFO In pppd the httpd-id is 592, set link phase is 0x4
186 1st day 00:02:34 PPP INFO send_phase 2098 pppd_phase = 0x4
185 1st day 00:02:34 PPP INFO rcvd [PADS sess-id(7115)]
184 1st day 00:02:34 PPP INFO sent [PADR Host-Uniq(0x000003c1)]
183 1st day 00:02:34 PPP INFO rcvd [PADO AC-Name:ag-01-glsfb-re0 AC-MAC:**.**.**.**.**]
182 1st day 00:02:33 PPP INFO sent [PADI Host-Uniq(0x000003c1)]
181 1st day 00:02:33 PPP INFO In pppd the httpd-id is 592, set link phase is 0x2
180 1st day 00:02:33 PPP INFO send_phase 2098 pppd_phase = 0x2
179 1st day 00:02:33 PPP NOTICE g_cmdBuf:pppd pppoe eth0.2 defaultroute unit 0 noaccomp nopcomp httpd-pid 592 user_len 14 passwd_len 6 special-flag 100 mru 1480 mtu 1480 usepeerdns
178 1st day 00:02:33 PPP NOTICE Standard authentication.
177 1st day 00:02:33 PPP NOTICE call pppoeFormatCmd
176 1st day 00:02:31 PPP NOTICE call pppoeCmdReqIPv4
175 1st day 00:02:23 PPP INFO In pppd the httpd-id is 592, set link phase is 0x0
174 1st day 00:02:23 PPP INFO send_phase 2098 pppd_phase = 0x0
173 1st day 00:02:23 PPP INFO In pppd the httpd-id is 592, set link phase is 0xa
Oct 17 2013, 12:14 PM

Quote
0.0237sec
0.98
6 queries
GZIP Disabled