yea, but not every area can MAX out 10Mbps,.

do you knw what is the different icon 505 and icon 505m? what chipset they use?
icon 505m can receive a better signal?
e353 more better than this?

hope u answer me:) thanksss

after a further look on the e367, only e367-u2 are available in malaysia making them the only 28.8mbps modem to support 900 and 2100 band i think

which means i can still use my umg 1831 >< no nid to upgrade 1st lol

i now have 2#icon505M, those are Made in Ireland modems.

M= memory card slot and mr3420 support this modem too, i suggest to use this modem on a router cause this blardy modem utilise too much ac power from the pc's mobo, hence your other usb ports cacat-ed by this icon

connect it to a mr3420 that have external ac and use wifi+cat6e cable, superb signal wei...............

i currently own one e367, this sexy modem ( why sexy, its glossy on its surface like my wife's glass silk stockings on tight skirt ) , compared to UMG, old skol chipset, this Qualcomm 8200 chipset is like a BMW on an Autobahn..and a Saga on Kampong road...........

Today I jumpa cat 6 flat cable like fat telephone cord.
Now using daiso cat 5.5 cable haha

Why not ask me.. I also got free from P1. never open it. White color lagi.

@digi: but hey saga is giving me constant 50++ ms... i guess i will live it 1st
and wait for digi to confirm the LTE spectrum before upgrading my umg

Give it to me foc haha
Cat 6 rite?

Nothing written on the cable.. I also don't have cable tester with me now to test.

Do you really need Cat6 cable... are you running a server with gigabit network from end to end?

Even my office not fully use Cat6 yet but all staff given cat6 cable.

The best cable is the shortest one, cos that will reduce the crosstalk and less data re-transmission.

This post has been edited by nordingh: May 1 2012, 11:20 PM

some saga's are better built than some, malaysian quality control......

btw, this is my "camry"







conclusion = nice PING dun necessary give me good UL/DL, it needs a good combo and generally my area is good on Upload and not Download

---

Added on May 2, 2012, 10:27 amfor those who doubt my "Camry have low RPM" here you go





This post has been edited by digilife: May 2 2012, 10:28 AM

LOL so detail

i am currently using dlink 3G modem, and it is quite bad i must say, will dc randomly and then usb cant recognize modem, or cant dial, or just sits there and shit, need a couple of freaking efforts to get it going, so is zte or huawei a good alternative?

Huawei, a good alternative.

dunno why but my dwm-156 keeps giving me whole lot of problems, and in a conclusive manner can say cant connect most of the time, on all usb ports

---

Added on May 3, 2012, 8:13 pmjust got e1762, will reach me tomorrow, hope that one no issue like this or i dunno what to do anymore..

This post has been edited by noobandroid: May 3 2012, 08:13 PM

E1762 confirm much more smooth to connect and less problems than your Dlink,

never get Dlink, Prolink, Csl, and all other none popular brand,

lesson learned

i too have a Dlink, so far so good but not on router, its direct plug in

maybe its your OS usb ports conflict

do a system restore if the Huawei too sucks

i'm on 64bit win7, and the dlink does not always communicate properly with my win7

how much is it? and where did you buy it? may i know? thanks!