the setting same as stress proc, just set the time to 1min. not going to wc kit, no money on hand now

What are the settings as i cant check now, primming the proc now.

Ok. I've increased the vcore to 1.40v. Orthos at 2.75 Ghz but temp went up to 58-59'c.....

I think I'll just keep it at 2.69 Ghz at stock for now la......

Woah, that is quite high bro. I think u need to upgrade the cooler.

This post has been edited by uzairi: May 26 2007, 12:12 AM

I just bought the cooler!!! 2 weeks old.

At orthos, 2.69Ghz at stock vcore will run at max core temp of 55'c.

Folding SMP now at 2.65 Ghz at stock vcore at 51'c.

BTW, I was wondering, since SMP client is unstable, can't we just copy the SMP client folder to a backup file once in a while?

I mean, intermittently backup the SMP folder. If anything happens, just run the backup SMP folder!!! @uzairi - what do you think?

Anyway, have to stop folding now. Going to sleep.....

This post has been edited by kmarc: May 26 2007, 12:21 AM

Wow, nice temp too.

Im not so sure about that, but u can try that.



This post has been edited by uzairi: May 26 2007, 12:25 AM

min=8, max=32, run FFT in place=checked, time=up to you

btw, what's the stepping of your X2 s939?

2.9GHz @ 1.344v is totally outta this world, nice burn in method there bro...

how many chips u have there...

woot... sum1's gonna upgrade display card ledi...

This post has been edited by ah_khoo: May 26 2007, 09:50 AM

two only la, 1 is x2 e6 and 1 is opty 146. the x2 e4 sold already and the x2 lcbke is my friend one, help him testing it

just looking for a better card, something around RM200, really kinda hard to find

one thing i've found was, if burn in usin small fft 1st, then only do blend test, there are chances that blend test less likely to fail, if just do blend test straight away w/o d former, yes, prime can fail easily...

shud be able to get a 73gt w/ ddr3 ba...

really? i did not even know about it, thanks for the tip, will try it next time. actually I experienced hard time with x2 and ram. the bh5 can prime stable up to 26x @ 2-2-2-5 1:1 sync with my 146 previously but come to x2, it limited to 250, more than that have to use divider. it might be ds/dds setting, have to spend time to play around it. and one more weird thing is, do you notice that x2 can use divider even the MAL remain set to 7ns w/o increase its value, it cant be done on single core proc.

yup, that's my target card. there are few people selling it, but still cant a trustable seller.

This post has been edited by gsan: May 26 2007, 10:22 AM

dually is more hard to pls bro, in 146 u deal w/ 1 core only, but dually u need to please both, which is a bit harder...

play less w d ram nowadays, but for me i always leave d mal & rp thingy to auto, less headache. as for d ds/dds setting, tight timin ram will be more stable w 0% (according to my experience) which only available in d 406 bios.

just tried but still no luck and 3GHz @ what vcore also prime failed due high temp. 64/70'c



This post has been edited by gsan: May 26 2007, 01:16 PM

64/70'c

Wow. You're really pushing the proc huh!

I'm tempted and encouraged by your efforts! Thought I stop at 2.69 Ghz but since your proc can go so high, I'm going to push mine too.

Now orthosing at 2.76 Ghz at 1.40v at 51/56'c....... I think I'll aim for 2.8 Ghz first. Hope to reduce the vcore once burn in done....

This post has been edited by kmarc: May 26 2007, 03:42 PM

Bro, i tried 32 and i get no problems at all. But when i use folding, lots of errors coming. I think using 512 is better, as recommended by charge n go at his A64 thread. With 512 max fft i got errors at 2.7ghz stock vcore.

---

Added on May 26, 2007, 4:06 pmWhy 512k ? because we use the value of the L2 cache of our processor.

This post has been edited by uzairi: May 26 2007, 04:06 PM

why direct pump to 1.4v? i believe that 2.8GHz @ 1.4v should not be problem

Guess my proc not that good. Tried 1.375v at 2.76 but orthos failed.

latest update..... 1.39v 3ghz... 10 hrs priming pri 3

Cool! Errr... what's your proc again? What cooling? Core temp?

LCBKE, ninja + air-cond.