Will try to install them later and compare the numbers with the AMD stock HSF.

If you guys are wondering what neuvas is going on about, I just picked up a Thermaltake Golden Orb II HSF

My X2 is HOT!

Looks like I need to watercool it before I can do some serious overclocking.

Yeah, that's with the TT Golden Orb II. Gonna try to reinstall it now just in case it wasn't properly installed.

**EDITED**

Reinstalled the heatsink and reapplied AS5, same temps. It might go down a wee bit more in a few days time though once the AS5 settled in.

Managed to reduce the vcore for 2.5Ghz

Yup, still using the Thermaltake Golden Orb II. I have an XP120 as well but a friend is using it right now. Guess I have to ask for it back

yup, this is the HOT'est' X2 s939 that I ever seen before.

X2 3800+ LCBKE 0643 TPMW

TDP: 89.0Watts 
TCaseMax: 71'c 

X2 3800+ LCBIE 0621 VPMW

TDP: 78.1Watts
TCaseMax: 67'c

X2 3800+ LDBFE 0623 WPMW 

TDP: 58.9Watts
TCaseMax: 59'c

hi, is there a big different between overclocking the s939 x2 and the am2 x2

haha, the temp. is so high, no plan to go over 2.7GHz 

270@1.334v...wow..

most i go is 280..stable. @ 1.55v.
but somehow my ram ..sigh...

now let it run at 270 as usual...forget the v..

now try burning-in to make it run at default vcore 

btw, I noticed that one of the rig is removed, what's going on? 

haha... I tot what happen pulak btw, still not get yourself dfi cfx3200 ? someone is selling it 2nd hand for RM450 

[attachmentid=236516]

not sure about the "gromacs" stress

btw, the moster is getting stronger 

[attachmentid=237124]

two only la, 1 is x2 e6 and 1 is opty 146. the x2 e4 sold already and the x2 lcbke is my friend one, help him testing it 

just looking for a better card, something around RM200, really kinda hard to find 

really? i did not even know about it, thanks for the tip, will try it next time. actually I experienced hard time with x2 and ram. the bh5 can prime stable up to 26x @ 2-2-2-5 1:1 sync with my 146 previously but come to x2, it limited to 250, more than that have to use divider. it might be ds/dds setting, have to spend time to play around it. and one more weird thing is, do you notice that x2 can use divider even the MAL remain set to 7ns w/o increase its value, it cant be done on single core proc.

yup, that's my target card. there are few people selling it, but still cant a trustable seller.

i got a MSI nF4 mobo wif 4GB Corsair VS RAM and AMD X2 3800+... wif GeCube Radeon X550... when play NFSMW the car go 2 fast and a bit jumpy... y is it like tat...? if i decrease the graphic quality the car will "fly"... when play LAN always got mismatch and got kicked...   is this y AMD is losing out...?

something new show up, notice any difference?   
next step, maybe 3GHz 

[attachmentid=239284]

same fan, no sure the cfm, but 2600rpm.
bingo, you're pro, so fast can guess currect already.
refer to my sig, no wc kit 

no money la... custom build wc kit quite expensive, not less than RM600 i think 
haha...why not let go your current E4 and get the E6 from elhh82? I just sold my E4 last week @ RM360 

have u tried the max fft 512k ? I need few people to reconfirm this because i can get to 2.8ghz easily with max fft 32k but lots of error when using max fft 512k.
Why not pumping the voltage a bit more ?

That's why I'm asking how hot is hot? If he's running 2.6 Ghz at 1.325v, then it shouldn't be THAT hot!??!! Unless 50'c is considered hot...... 

Good then. My temps between 2 cores differs by 5-6c. How about you guys ?

But at 1.49v??!!?? I think even good air HSF will have trouble keeping the temp at an acceptable level?