dont refer to the smartguardian, the temp reading is not accurate.

btw, what's the stepping of your X2 ?

This post has been edited by gsan: May 24 2007, 02:27 AM

270@1.334v...wow..

most i go is 280..stable. @ 1.55v.
but somehow my ram ..sigh...

now let it run at 270 as usual...forget the v..

X2 3800+ LCBKE 0643 TPMW

TDP: 89.0Watts sweat.gif
TCaseMax: 71'c brows.gif

Same stepping as yours but my TCaseMax : 69c.

Yours are nice too..

another nice chip there...

violate d forum rule, siggy too big...

Meaning 2.8ghz ?

haha... I tot what happen pulak btw, still not get yourself dfi cfx3200 ? someone is selling it 2nd hand for RM450

hi all... I faced BSOD (irql less than or not equal) whenever I tried to OC to more than 2.25ghz for X2 3800 Windsor 65W.

the problem is, the BIOS only allow me to set up to 1.30V max in Vcore, that's the max. rated voltage for Windsor EE edition.

anyone here have OC to more than 2.3ghz sucessfully with Vcore 1.300V?

this is my CPU detail
http://valid.x86-secret.com/show_oc?id=197034

This post has been edited by dattebayo: May 24 2007, 11:47 AM

wow... 2.8GHz is awesome bro...

golden chip u have there... think of cfx3200 few months later, currently just bought lcd & a pair of sata2 hdd, broke like hell ledi now...

This post has been edited by ah_khoo: May 24 2007, 11:54 AM

posting on behalf of my friend



the real vcore is 1.43 at load, measured using DMM...
BTW is 1.43v is too high for AMD....too long nv play with AMD already....forgot about the voltages

This post has been edited by sup3rfly: May 24 2007, 03:53 PM

super!!!!!!!!!!!!! 3Ghz for X2 3800+..........


way to go

---

Added on May 24, 2007, 7:27 pmi manage to OC my proc till 2.4Ghz superpi/dual sp2004 stable with 1.4V set at Bios.(not really know about actual voltage)

This post has been edited by overclockalbert: May 24 2007, 07:27 PM

anything below 1.6v still acceptable provided you have the decent cooling.

what's the stepping of the X2 ?

Wow! Unbelievable!

What cooling are you using? What is the temperature for core0/core1?

I answered behalf on him, ninja + air-cond, temp. around 52/56'c less than 60'c, cant remember well.

Aiyaa.... maybe should get a better cooler than my noctua. My proc running at 2.69 Ghz (stock vcore) in air-con room already 52/56'c...... (and it is the same toledo core!)

This post has been edited by kmarc: May 24 2007, 08:26 PM

just change the fan, noctua original 120mm fan very suck, silent but no performace

I guess that's true cause I can feel air blowing from the side of the fan that is supposed to be sucking in air!!!

yup, you're right. try turn off the air-cond and you put your hand on the another side of the heatsink, there's no fan come out from there and thus the whole heatsink very hot.

prime 2.7GHz @ 1.344v, original fan yield 62'c/66'c but changed to adda 120mm fan, the temp. lower to 57'c/62'c.

Thx for the tip!

Going to change mine and see. Just that the retention clips are a pain to remove....

oh ya? that's easy for me, maybe u installed in the wrong way

Ok will try it and see....

This post has been edited by kmarc: May 24 2007, 09:46 PM