Hey trustmeiamlegit, what are your temps during idle and full load? I was kinda worried about mine...

chill man..

idle , sometimes higher 40s sometimes lower 50s

gaming when gpu usage at 99% .. 81C ... peaks at 82C...

how much u get??

i play with OC btw...

ahh~

Idle the lowest i got with cooler is 40c, but usually around 50c

For gaming, some games peaks at 82C too, like BF2, MW3. ( Without cooler and without OC )

Mind sharing your OC numbers? You use Afterburner or the Nvidia tool?

my clocks r shown in the links in my siggy... just click on the link haha... its stable for the witcher 2.. but not stable for crysis2.. need to downclock abit for crysis 2


i use afterburner !! .... cuz its so nice.. can see temps, gpu usage.. clocks freq.. and can make log file...

but the memory clock is limited to 1625mhz.. if u use nvidia inspector.. u can go more than 1625mhz for the memory clock

This post has been edited by trustmeiamlegit: Dec 2 2011, 05:14 PM

I see Are you on any cooler? Planning to get the SF19, haha. My current cooler is made for 14" only ._.

The black metallic mesh on the right vent is super hot while gaming, haha, cant put my finger on it for more then 5 seconds

yes.. i use cap ayam cooler pad.. lol.... i feel my temps still the same...!!

my finger can stand for 10 secs !

Cooler i feel got difference, some games peak 82c, but running around 73-82, not constant 80+. Even considered repaste, but the system is still quite new, rather wait till it hit 90+c first.

Lololol, must be dead skin, haha

calm dude, just switch off it totally, unplug the power cable from the lappy and press the start button few times to discharge any electric in you lappy. then plug back power cable to your lappy, switch on the plug then power on your lappy: now it should boot normally. dude this happened few times with my G53SW, I thinks is normal maybe due to cold boot or something else.

if forever unable to boot the you r done haha , warranty claim ASAP!

what nvidia driver are u on??

285.62

should be on the latest verde 285.62

fantastic.. did u play crysis 2 with this driver using overclock ??

Noo, i dare not attempt overclocking from my current temp yet, lol. I think I got *30-60 fps on Advanced. I didnt use any special patches to it

This post has been edited by Bluzzy-: Dec 2 2011, 05:47 PM

i c... ure on the 3d version rite?? u shud be able to play all the games out the at high to ultra settings at 1366x768 at stock clocks... since the stock core clock is quite high alredy.. 775mhz..

the reason im asking is, the 258.62 driver made my stable OC unstable in crysis 2 n mafia 2.. screen flashed... clocks were reset to stock... my OC was rock solid on 280.26 ... can game for 2 hours straight wihtout crashing..

hopefully someone here can confirm this..

so now im back to 280.26...

good thing abt 258.62 is that u get fps boost on certain games and battlefield 3 doenst crash// lol

This post has been edited by trustmeiamlegit: Dec 2 2011, 05:53 PM

Kudos on the new thread !!!

I think I read something like this before. What causes it is the magnetic sensor on the screen which tells the computer when the lid is closed or open...

If I'm not mistaken.. What you will wanna do is, use a small, mild-strength magnet, and rub it at the spot to the right of your touchpad where it would touch the lid when it is close.

Here is where you should do it



Rub on it with magnet for around 20-30 seconds while power is off and everything unplugged.. Do at own risk and goodluck

P.S: If this doesn't solve it, then the culprit is not the magnetic sensor

after seeing your symptoms i recall when i 1st get my laptop and switch it on. it was blank screen for more than 5 mins. for the moment i thought i got a defective unit . i switch it off and power on again and voila finally the display show sth for me. seem like this is common in this laptop right??

The power button issue very common on d g53sw . Seems like sx also. But ive never encountered it . Touch wood. I'm more concerned abt the brokened power connector pin . Heard alot of stories regarding this on the g53sw over the asusrog forums . It will be a nitemare if that happens

His issue wont be the power button ._. Coz it did turn on...

Probably the sensor got magnetized and thought the the lid was always closed, thus turning off the display

This post has been edited by Bluzzy-: Dec 3 2011, 12:22 AM

Well can he hear the start up sound?