Hey there..I have a Proton Iswara which is about 12 years old.. There is abit of aesthetic issues..The paint job is not nice anymore and the interior is still tolerable..Do you guys have any recomendations on place where i can do up the paint job and ketuk the indentions on the car?as well as a place where i have the option to do up the inside of the car example...the car seats,the cd player and speakers.. thanks guys

What the place name, address & who can we contact.
Please do share... The bodykit looks nice!

50 buck for the motor
can diy easily look around
basicly its remove the bottom window trim , remove window glass , then remove the scissor assemble
look around and its actually easy to do it
shoik la tu baru kahwin

Ok, that sounded reasonable to happen on my 26k km car...

OK.. will try both and see...
You mean distributor cap there?

Any place to wrap seats around pj/kl area except kedai abang?
Budget <RM500... Sudah pecah lubang this month my pocket

This post has been edited by cyanboy: Nov 28 2011, 01:29 AM

http://www.mudah.my/Apexi+ekzos+jasma+japan-12586989.htm

Something to share today... condition looks good.. importantly is the inlet .... 2" kinda rare




This post has been edited by Peekab0o: Nov 28 2011, 12:42 PM

Front bumper: DAMD
Front hood: Evo X
Side skirt: DAMD
Rear bumper: Super touring
Spoiler: Mugen DC2

Search for LYN user name RAVEN CHONG

guys, if change block need to change wiring oso one meh? canot use back own wiring?

Usually people change clutch , flywheel . Otherwise no need to change anything else...

Kasi put in 1.6 clutch and super touring flywheel than veli nais oledi ur car...

This post has been edited by Peekab0o: Nov 28 2011, 08:26 PM

im refering to wiring. peekaboo. did u change the wiring when u swap the block? coz a friend of mine said need to change. wtf?

This post has been edited by lyordson: Nov 28 2011, 09:52 PM

For cd player go check out brothers in kelana jaya. They have branded jvc kenwood cd mp3 players for rm200 or so. Cheap. For the others not sure.... Painting i heard quite expensive these days about 1.5 k to 2 k above... Car seat someone in this formoffering the service located in selayang. Or try central car cushion in kepong. Should be around 1 k +- for wrapping front and rear seat.

Hi sifu's!

Need some advice. I got my carburetor tuned by the mechanics at Proton. They managed to set my RPM for both Idle with air/con and Idle without a/con to around 900RPM (definitely less than 1000RPM). However the next morning when I started my engine I found the RPM to be very low (around 500RPM). Engine was shaking bad and almost like want to die. Before this whenever I cold start in the morning, the RPM would go to 1000RPM and stay there until engine warmed up.

What could be the problem? Can I do it myself or should I bring it back to the mechanic?

Really appreciate advice. Thank you in advance.

I need to let go of my original LMST front bumper and spoiler. Any idea on the price I should put on each? Both are black. Both are in good condition.

No need ... and no i didnt change juz swap block will do change to 1.6 clutch to handle the 1.5 power better and new flywheel get super touring one... pickup sure feels good ..




Saw the pic above there ? Look at that yellow arrow label... in my place here Johor sparepart shop , halfcut shops they call it carburetor vacuumn switch ... i dont know what they call it in KL ... probably gold ufo dish for carb or something... usually that spoils then ur idle no mather how u adjust the screw it still will drop till 500 rpm like that and jerk badly...

This post has been edited by Peekab0o: Nov 28 2011, 10:56 PM

Where can we find the small vacum filter ah? Sparepart got?

ok thanks. and u can stop mentioning bout the clutch & ST flywheel. =.=

Need some help from sifus here, my saga lmst can smell exhaust smell inside the car when driving time, don t know from where leaking, fully changed the aircond system and also checked the whole exhaust system, but still can smell exhaust smell with in the car when driving. anyone with similar problems? need help, worried i get knocked out unconsciously when driving then accident for sure :'(

I thought it's famous for LMST?
1. Dun touch air distributor knob.
2. Dun touch air intake knob.

Once touch these two and voila! Time to go back to P1 centre and adjust

You can try refer to this thread of V24, there's a member that cover the hole for external air intake into the cabin.

But by doing so will disable the function of the air intake knob.

http://forum.lowyat.net/topic/1914856/+1737

Nice one

hi sifus..
when i press accelerator, and when i let go accelerator.. got a sound "tak"
sometimes when road is rough, also will have that same sound.. like coming from the driver side front area..
anybody experience this b4?

how much for each? how about grill, got let go? is it the newer batch ver. punya grill?