try to tickle it gently..*although u may gt ur finger in pain..ticke hard, but gentle, nt vigrously coz u may spoil it..

try shaking your case with the pump on, then play with the speed, slow & high. You then can try to squeeze the tubing to add more pressure but dont hold it too long.

Currently testing my system for leaking. this is my 1st time playing wc. is it safe to move the rig once we installed the wc? is there possibility the water to spoil during transportation? huhu.

for safety, better drain your loop first especially on long distance travel...

btw ive been moving a lot with my old cm690 and prodigy with water inside since i lived in college..need to move every semester

so, ade tumpah pape x? huhu

drove for 5-6hours journey with my desktop for few times w/o any problem.
a friend of mine traveled using busses and motorbike w/o draining the loop

sifus, i need your help on my WC loop. before this I set my WC loop as below:

Pump/Res > 360rad > cpu > 360rad > gpu1 > gpu2 > pump/res

and the gpu2 is hotter than gpu1 about 6-8degC during full load. So I add in another 120rad with push fan in between the gpu1 and gpu2 just to cool off gpu2. However the temp difference now become 9-11degC under load .

so my question, is it because of not enough pressure from single pump to push and pull the water inside the loop (already set the pump speed to Max)? or another reason since theoretically gpu2 temps should've dropped but instead it increased about 2degC. in other words no improvement at all .

This post has been edited by shepard: Dec 17 2012, 12:47 PM

Nothing wrong with the system and loop. +-2'c is there.

The sensor differ the reading for each cards.

If the temperature is the concern, changing loop or adding monster radiator wont beat a pc with RX360 in a room with 1hp aircon.

Thanks for the reply . So that means my single D5 vario is enough for my current WC setup right?

Btw, does any sifus here live in Penang as I would like to ask some expert to mod my case/outside Rads and make it less visible especially those fan cables that really makes this rig looks ridiculous . Oh yes I would like to ask for help to sleeve my PSU and fans cables as well

p/s: ok now it is time to spend some $$ for A/C rather than expensive WC stuff hehe .

i added dual d5 + monster radiator, i get same temperature with single d5+RX360. zzzz. But my room is 24/7 aircon.

water is still water.

since u used 2 different brand & model for ur gpus' wb that may affect ur the temp between both gpu.

you dont need to mod..just change to new casing that can accommodate 2 triple rad or even quad rad such as TJ07..i suggest shinobi xl for RM499..can allocate 2x360mm rad..one on the roof..and another one in the front..like this

Thanks guys, but I dont think that I'm going to change the case any sooner as I like the design of my current HAF-X somemore need to save the dollar for A/C .

irie, yes that's why I'm selling my EK-FC7970 and goin g for another heatkiller WB..thanks

Thanks for the advice, I've tried all that, it does help to bled out the bubbles, but bits by bits.
Later found out that I just have to let the pump work on itself to push out all the bubbles.
Let the pump runs while I went shower, came back it was totally silent and pumping at the rate of what it should. =)
As off current, all the bubbles have been fully bled out.
So happy with the current noise level.

That's totally true bro. U cant just aspect the loop to bleed in an instance. U have to give it some time to bleed on itself.

Yes, I dint know that at first, lack of experience, and I thought that the bubble could ruin my pump.
LOL. Silly me.

damm la nowdays so hard to buy WC parts most pp no stock.

Congratulations ..new owner for gtx680sli+wb..
can't wait to see ur latest setup

This post has been edited by Zzorro: Dec 18 2012, 02:42 PM


Attached thumbnail(s)

Tq bro...
will update soon once my other w/c parts arrive

tell me about it bro....I selected all the stuff I need for my build then after pm all the sellers, all of them only got half of the items that I want...the rest dont have

Its either do bulk purchase or wait till they bring but no guarantee on that There is a bulk purchase going on till 20th...if you want to get something better do it fast