If the rad is quite new, den mean u never flush it good ....or maybe bio thing...

used it once before w/o flushing for a month ++
the one with pink coolant LOL
then drain the pinkie stuff and flush it using tap water + distilled water for few time
till the water clean without any residue left
cleaned all the blocks

i think you need to re-check it again. maybe some residue still left inside..

how check it?
flushed it for a long period
using tap water from a bucket to another bucket
than flushed using distilled water using the same method
last using new clean distilled water in a loop

firstly need to flush it. then using the water pipe to blow inside the block / radiator etc. 10-15 minutes more or less. then flush it again using distilled water. dry it as much as you can. re-apply back the wb and EK coolant. let's see what happen next

before and after


the purple one is from the gpus loop
red is from the other loop
both are EK Koolant red blood

kaler bertukar sbb tindak balas bio tu weii... pasni kalau jadi lagi call joe vlad suruh dia complain kt EK-WB.. hehehhee

hahaha the problem is only the gpu loop changed and the cpu loop remain the same , just getting darker only

i assume that is the effect of ur wax.

Some residue only come off on certain temperature .....
Or as Dennis said, wax effect =.=...

---

Added on March 13, 2012, 2:04 pmPurple: Mix magenta with a small amount of cyan, blue, or violet.]

i assume ur red is magenta then .... so what is ur wax color lol....
where is the blue color come from /gg = =!!


This post has been edited by pennykia: Mar 13 2012, 02:04 PM

hi bros, may i asks , can i use petronas battery water as coolant to my pc water cooling system , with not negative effect?

petronas 1liter/rm2.20, Mobil rm2.70 ( very cheap compare to coolant)
Air bateri PETRONAS dapat mengelakkan berlaku:
-Pengaratan dan endapan di plat bateri
-Tindakbalas kimia yang menghasilkan...
-Kereputan pada getah

about the same price as the spritzer distill but spritzer distill alot of ppl use..battery distill water..not sure

why not go for spritzer?

actually any type of proper distill or Reverse osmosis water is fine. Battery water is distill.
In chemistry distill water is a pure as it can get in water. Actually between spritzer and non-branded distill water is the same. Its distill, its suppose to be pure. Only difference is branding
anyway once you put it into your loop its picks up copper particles, brass particles thus making it conductive. Using distill water is just to make sure you are not adding in more contaminants into your loop. Every loop has contaminants
best is mineral oil not conductive

both of the loops were waxed last time
it happened way before i cleaned the tube with the wax.

plz consult EK support and do update us , thank !

another EK related issue?
starting to be a trend

at last you know what the culprits was.. need to clean it kaw-kaw again this time to avoid the same effect

---

Added on March 13, 2012, 5:46 pmyes, you can use it. no negative effect except if the water drop to the circuit then kaboom... either distilled or reverse osmosis are conductive to the electricity

This post has been edited by kInOzAwA: Mar 13 2012, 05:46 PM

the culprit for now

Ek support above loop?

Anyway, i believe they are some additonal substances inside the vga loop.

This post has been edited by Dennos: Mar 13 2012, 07:05 PM

new routing... old one better or this one ??? still alot to work to do and item to wait zzzz

---

Added on March 13, 2012, 11:50 pm
last time i pump d5 dual pump top with Speed 5, i got abt 170 little per hours...
now with mcp35x2, at 40+ % , i got 150+ l/h =)
it's basically silent when running below 70% ....

one more shot for 55% setting...



This post has been edited by pennykia: Mar 13 2012, 11:54 PM