Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
160 Pages « < 40 41 42 43 44 > » Bottom

Outline · [ Standard ] · Linear+

 LYN Proton Wira Club (LYN-PWC) V-XXVII, Come in & let's discuss about Wira

views
     
Str33tBoY
post Dec 19 2011, 10:02 AM

Regular
******
Senior Member
1,874 posts

Joined: Dec 2005
From: Malacca



wana ask all d sifus here...
aniway to get rid of d wiper from jumping or vibrating when wiping...?
as mine alwaz jumping or vibration when wiping down...
so my windscreen is quite hard to see during raining day...
thx...
KIntos
post Dec 19 2011, 10:12 AM

Regular
******
Senior Member
1,132 posts

Joined: Dec 2008
QUOTE(xxboxx @ Dec 19 2011, 09:57 AM)
oh ya, if the RPM too low also will make the light dim coz not enough speed fr the alternator to charge.
1st of all, your is injection or carburetor? injection normally won't need to adjust one.
if not mistaken counter clock wise to reduce.
*
bro. how to check injection or carburator. mine is 1.5gli auto 2000. all in my mind should be injection woh. i did threebond ytd, now need to adjust back the idling time. somehow now i donu why my idle rpm is 900 but with aircond and shift D reduced to almost like 500 and even sometimes donu why lower then 500 until about 200 rpm when reversing engine die.

TSafosz
post Dec 19 2011, 10:16 AM

Justice, My Foot!
******
Senior Member
1,413 posts

Joined: Jun 2006
From: Shah Alam
QUOTE(shinjite @ Dec 19 2011, 09:33 AM)
Afosz, no need to check rpm whether dropping or increasing one at first, just listen to the engine sound. Check only when you wanna set your rpm target for idling smile.gif
*
Yes that's the easier way. RPM dropping when the engine sounds slower and starting to vibrate. RPM increases when the belt spins faster.
xxboxx
post Dec 19 2011, 11:33 AM

The mind is for having ideas, not holding them
*******
Senior Member
5,261 posts

Joined: Oct 2004
From: J@Y B33


QUOTE(Str33tBoY @ Dec 19 2011, 10:02 AM)
wana ask all d sifus here...
aniway to get rid of d wiper from jumping or vibrating when wiping...?
as mine alwaz jumping or vibration when wiping down...
so my windscreen is quite hard to see during raining day...
thx...
*
Change to good rubber wiper such as Bosch. Also clean the glass with glass cleaner. But if the glass scratched badly, can't do much.

QUOTE(KIntos @ Dec 19 2011, 10:12 AM)
bro. how to check injection or carburator. mine is 1.5gli auto 2000. all in my mind should be injection woh. i did threebond ytd, now need to adjust back the idling time. somehow now i donu why my idle rpm is 900 but with aircond and shift D reduced to almost like 500 and even sometimes donu why lower then 500 until about 200 rpm when reversing engine die.
*
2000 should be injection kot. Just see the top of engine got one big black round plastic or not, if got is carburetor.
KIntos
post Dec 19 2011, 11:52 AM

Regular
******
Senior Member
1,132 posts

Joined: Dec 2008
QUOTE(xxboxx @ Dec 19 2011, 11:33 AM)
Change to good rubber wiper such as Bosch. Also clean the glass with glass cleaner. But if the glass scratched badly, can't do much.
2000 should be injection kot. Just see the top of engine got one big black round plastic or not, if got is carburetor.
*
ohh. i think you mean the air filter round plastic like my old proton saga. my wira dont have those.

This post has been edited by KIntos: Dec 19 2011, 11:58 AM
shinjite
post Dec 19 2011, 11:52 AM

�ŞħĬΩĵΐŦ��
********
All Stars
19,321 posts

Joined: Jan 2003
From: Klang


4G15 post 1997 are all injection already smile.gif
TSafosz
post Dec 19 2011, 01:45 PM

Justice, My Foot!
******
Senior Member
1,413 posts

Joined: Jun 2006
From: Shah Alam
QUOTE(shinjite @ Dec 19 2011, 11:52 AM)
4G15 post 1997 are all injection already smile.gif
*
I thought 1998 ? Because I have a friend using one '98 carb
shinjite
post Dec 19 2011, 02:08 PM

�ŞħĬΩĵΐŦ��
********
All Stars
19,321 posts

Joined: Jan 2003
From: Klang


Then I guess you're right, post 1998. Thanks for correcting smile.gif

Anyway, bought myself a set of stiff rings for my ride. Will install it today biggrin.gif
Jajay Chong Hon Keat
post Dec 19 2011, 02:14 PM

New Member
*
Junior Member
20 posts

Joined: Dec 2011
From: Sabah.


I am still driving 97 carb... Damm eat petrol leh... Thinking to change fuel injection now but scare the horsepower will decrease.
shinjite
post Dec 19 2011, 02:24 PM

�ŞħĬΩĵΐŦ��
********
All Stars
19,321 posts

Joined: Jan 2003
From: Klang


You just need to tune your carb
xxboxx
post Dec 19 2011, 02:31 PM

The mind is for having ideas, not holding them
*******
Senior Member
5,261 posts

Joined: Oct 2004
From: J@Y B33


QUOTE(shinjite @ Dec 19 2011, 02:08 PM)
Then I guess you're right, post 1998. Thanks for correcting smile.gif

Anyway, bought myself a set of stiff rings for my ride. Will install it today biggrin.gif
*
How much for it? Any shop can install it or need to be experience with the stiff ring?

Please do give a review after install it. rclxms.gif

QUOTE(Jajay Chong Hon Keat @ Dec 19 2011, 02:14 PM)
I am still driving 97 carb... Damm eat petrol leh... Thinking to change fuel injection now but scare the horsepower will decrease.
*
Yours is 1.3 or 1.5?

Feels not really worth it to change injection with the cost vs power & fuel gain. Look for experience foreman that expert in tuning carb lar.
Jajay Chong Hon Keat
post Dec 19 2011, 02:43 PM

New Member
*
Junior Member
20 posts

Joined: Dec 2011
From: Sabah.


QUOTE(xxboxx @ Dec 19 2011, 03:31 PM)
How much for it? Any shop can install it or need to be experience with the stiff ring?

Please do give a review after install it. rclxms.gif
Yours is 1.3 or 1.5?

Feels not really worth it to change injection with the cost vs power & fuel gain. Look for experience foreman that expert in tuning carb lar.
*
Mine is 1.5GL... Feel damm eat petrol compare to other 1.5 cars. How to tune well in carb? Will it lost power after tuned to save petrol? Hmm... How come no worth it? Almost the same?
shinjite
post Dec 19 2011, 02:48 PM

�ŞħĬΩĵΐŦ��
********
All Stars
19,321 posts

Joined: Jan 2003
From: Klang


QUOTE(xxboxx @ Dec 19 2011, 02:31 PM)
How much for it? Any shop can install it or need to be experience with the stiff ring?

Please do give a review after install it. rclxms.gif

*
Mine is from Race Tech Chassis Alignment Kit
RM170, you can get from nelson's friend Xavier biggrin.gif

Basically the installation is to the car's subframe smile.gif
carcraze66
post Dec 19 2011, 04:07 PM

Ninetwenty2
****
Senior Member
628 posts

Joined: Aug 2007

QUOTE(Str33tBoY @ Dec 19 2011, 11:02 AM)
wana ask all d sifus here...
aniway to get rid of d wiper from jumping or vibrating when wiping...?
as mine alwaz jumping or vibration when wiping down...
so my windscreen is quite hard to see during raining day...
thx...
*
have you change new wiper? or apply any rain x? and check whether de wiper isit loose..as mine its loose so its giving screeching sound...haha


xxboxx
post Dec 19 2011, 04:49 PM

The mind is for having ideas, not holding them
*******
Senior Member
5,261 posts

Joined: Oct 2004
From: J@Y B33


QUOTE(Jajay Chong Hon Keat @ Dec 19 2011, 02:43 PM)
Mine is 1.5GL... Feel damm eat petrol compare to other 1.5 cars. How to tune well in carb? Will it lost power after tuned to save petrol? Hmm... How come no worth it? Almost the same?
*

that's why give to experience tuner, they know how to tune properly.

not really worth because "cost vs power & fuel gain"


QUOTE(shinjite @ Dec 19 2011, 02:48 PM)
Mine is from Race Tech Chassis Alignment Kit
RM170, you can get from nelson's friend Xavier biggrin.gif

Basically the installation is to the car's subframe smile.gif
*
I saw from their FB, it consist of 4 nuts?

QUOTE(carcraze66 @ Dec 19 2011, 04:07 PM)
have you change new wiper? or apply any rain x? and check whether de wiper isit loose..as mine its loose so its giving screeching sound...haha
*
How to check if the wiper is loose? Mine some time got some time dun tongue.gif
Shortyeyek
post Dec 19 2011, 06:27 PM

New Member
*
Newbie
0 posts

Joined: May 2010
From: P.island malaysia


QUOTE(xxboxx @ Dec 18 2011, 07:57 PM)
1. i used APM Performax. abs become soft after less than  a year usage.
*
ohhh~ sad case.. means no good lor? any other recommendation? that is almost same or same price wan?
wailup
post Dec 19 2011, 06:48 PM

Getting Started
**
Junior Member
97 posts

Joined: Jan 2009


APM really no good. I also use a bit more than a year. N it starts leaking already. Change to Sachs. 3++ years still strong n no leaks.
Shortyeyek
post Dec 19 2011, 09:30 PM

New Member
*
Newbie
0 posts

Joined: May 2010
From: P.island malaysia


QUOTE(wailup @ Dec 19 2011, 06:48 PM)
APM really no good. I also use a bit more than a year. N it starts leaking already. Change to Sachs. 3++ years still strong n no leaks.
*
I see, Sachs no other specific model or name d right? Lik APM performax and APM. Other than sachs anymore other good brand?
nelsonlye
post Dec 19 2011, 09:33 PM

Getting Started
**
Junior Member
57 posts

Joined: Mar 2006
From: Kuala Lumpur


Anyone have any idea where can i get the Non-smoking cover???
Attached Image
angrysnail
post Dec 19 2011, 09:46 PM

SuperStars
******
Senior Member
1,413 posts

Joined: Aug 2009
From: Damansara



QUOTE(Str33tBoY @ Dec 19 2011, 10:02 AM)
wana ask all d sifus here...
aniway to get rid of d wiper from jumping or vibrating when wiping...?
as mine alwaz jumping or vibration when wiping down...
so my windscreen is quite hard to see during raining day...
thx...
*
in my experience..first i changed the wiper..wipe up ok,wipe down judder..not ok..
adjust wiper arm..not help at all..
lastly bought pair of wiper arm..kowtim.. thumbup.gif

no judder or vibrate anymore.. laugh.gif


Added on December 19, 2011, 9:50 pm
QUOTE(nelsonlye @ Dec 19 2011, 07:57 AM)
No idea....
thanks for reply..seems only that hold my plan to go 93T.. tongue.gif

This post has been edited by angrysnail: Dec 19 2011, 09:50 PM

160 Pages « < 40 41 42 43 44 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0301sec    0.97    6 queries    GZIP Disabled
Time is now: 22nd December 2025 - 06:35 PM